Re: [PATCH v6] numa: make node_to_cpumask_map() NUMA_NO_NODE aware

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2019/9/24 17:25, Peter Zijlstra wrote:
> On Tue, Sep 24, 2019 at 09:29:50AM +0800, Yunsheng Lin wrote:
>> On 2019/9/24 4:34, Peter Zijlstra wrote:
> 
>>> I'm saying the ACPI standard is wrong. Explain to me how it is
>>> physically possible to have a device without NUMA affinity in a NUMA
>>> system?
>>>
>>>  1) The fundamental interconnect is not uniform.
>>>  2) The device needs to actually be somewhere.
>>>
>>
>> From what I can see, NUMA_NO_NODE may make sense in the below case:
>>
>> 1) Theoretically, there would be a device that can access all the memory
>> uniformly and can be accessed by all cpus uniformly even in a NUMA system.
>> Suppose we have two nodes, and the device just sit in the middle of the
>> interconnect between the two nodes.
>>
>> Even we define a third node solely for the device, we may need to look at
>> the node distance to decide the device can be accessed uniformly.
>>
>> Or we can decide that the device can be accessed uniformly by setting
>> it's node to NUMA_NO_NODE.
> 
> This is indeed a theoretical case; it doesn't scale. The moment you're
> adding multiple sockets or even board interconnects this all goes out
> the window.
> 
> And in this case, forcing the device to either node is fine.

Not really.
For packet sending and receiving, the buffer memory may be allocated
dynamically. Node of tx buffer memory is mainly based on the cpu
that is sending sending, node of rx buffer memory is mainly based on
the cpu the interrupt handler of the device is running on, and the
device' interrupt affinity is mainly based on node id of the device.

We can bind the processes that are using the device to both nodes
in order to utilize memory on both nodes for packet sending.

But for packet receiving, the node1 may not be used becuase the node
id of device is forced to node 0, which is the default way to bind
the interrupt to the cpu of the same node.

If node_to_cpumask_map() returns all usable cpus when the device's node
id is NUMA_NO_NODE, then interrupt can be binded to the cpus on both nodes.

> 
>> 2) For many virtual deivces, such as tun or loopback netdevice, they
>> are also accessed uniformly by all cpus.
> 
> Not true; the virtual device will sit in memory local to some node.
> 
> And as with physical devices, you probably want at least one (virtual)
> queue per node.

There may be similar handling as above for virtual device too.

> 
> 
> .
> 




[Index of Archives]     [Netdev]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux