After a few weeks of no work on the kernel, I've vacuumed up the outstanding patches. They include the removal of __do_IRQ, so please give it a test on your hardware. On boot-up of my UP1500, I see HWRPB cycle frequency bogus. Estimated 796423805 Hz Trying to install interrupt handler for IRQ8 ------------[ cut here ]------------ WARNING: at kernel/softirq.c:138 __local_bh_enable+0xa8/0xc0() Modules linked in: fffffc0000973cf0 ffffffffffffffff fffffc000032ff78 0000000000000200 0000000000000008 0000000000000008 0000000000000001 0000000000000001 fffffc00003306e8 fffffc000099be18 fffffc0000315604 fffffc000035fab0 fffffc00003157a4 fffffc000097bd38 0000000000000000 fffffc0002c08240 fffffc0000310e10 fffffc0000974f48 fffffc000096e5c0 0000000000000038 0000000000000001 0000000000000007 0000000000000000 0000000000000005 Trace: [<fffffc000032ff78>] __local_bh_enable+0xa8/0xc0 [<fffffc00003306e8>] irq_enter+0x68/0x90 [<fffffc0000315604>] handle_irq+0x64/0xf0 [<fffffc000035fab0>] handle_bad_irq+0x0/0x390 [<fffffc00003157a4>] do_entInt+0xc4/0x1e0 [<fffffc0000310e10>] ret_from_sys_call+0x0/0x10 [<fffffc00004e694c>] vgacon_startup+0x1cc/0x450 [<fffffc00003309c0>] request_resource+0x0/0x30 [<fffffc00004e6980>] vgacon_startup+0x200/0x450 [<fffffc000031001c>] _stext+0x1c/0x20 ---[ end trace 4eaa2a86a8e2da22 ]--- Console: colour VGA+ 80x25 console [ttyS0] enabled So something else needs to be done. Ivan, the last patch in my tree is a breakage fix that you proposed. It seems fine to me; can you please give your sign-off? Thanks, Matt -- To unsubscribe from this list: send the line "unsubscribe linux-alpha" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html