On Wed, 14 Apr 2004, Kevin J. Cummings wrote: > Well, > Given that the tape drive is attached to the Adaptec 2940U SCSI > controller, doesn't st have to eventually send SCSI commands to the > aic7xxx driver???? > > Here are the relevent modules after I: > > depmod -ae > modprobe st > > > [root@kjc386 root]# lsmod > > st 29964 0 (unused) > > ide-scsi 11120 0 > > sd_mod 13004 2 > > sr_mod 16888 0 (autoclean) > > cdrom 31040 0 [sr_mod ide-cd] > > aic7xxx 130996 1 > > scsi_mod 102968 6 [st sg sr_mod ide-scsi aic7xxx sd_mod] > > But, there is still no mention of the tape drive in /proc/scsi/scsi, nor > when I: > > cdrecord --scanbus > > > Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling > > Linux sg driver version: 3.1.24 > > Using libscg version 'schily-0.7' > > scsibus0: > > 0,0,0 0) * > > 0,1,0 1) * > > 0,2,0 2) * > > 0,3,0 3) * > > 0,4,0 4) * > > 0,5,0 5) * > > 0,6,0 6) 'IBM ' 'DSAS-3360 !a' 'S47Q' Disk > > 0,7,0 7) * > > scsibus1: > > 1,0,0 100) 'CDWRITER' 'IDE5224 ' '001H' Removable CD-ROM > > 1,1,0 101) * > > 1,2,0 102) * > > 1,3,0 103) * > > 1,4,0 104) * > > 1,5,0 105) * > > 1,6,0 106) * > > 1,7,0 107) * > > mt -f /dev/st0 status > > > /dev/st0: No such device Is this also reflected on the bios output during post on the scsci controller? Sorry if you already mentioned in a previous, but errantly deleted them. - : send the line "unsubscribe linux-admin" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html