[PATCH 1/1] tty: serial: owl: Initialize lock before registering port

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Running a lockdep-enabled kernel leads to the following splat when
probing the owl-uart driver:

[    1.271784] b0124000.serial: ttyOWL2 at MMIO 0xb0124000 (irq = 22, base_baud = 1500000) is a owl-uart
[    1.281226] INFO: trying to register non-static key.
[    1.286179] the code is fine but needs lockdep annotation.
[    1.291648] turning off the locking correctness validator.
[    1.297125] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc7+ #70
[    1.303462] Hardware name: Generic DT based system
[    1.308268] [<80111d3c>] (unwind_backtrace) from [<8010c9b8>] (show_stack+0x10/0x14)
[    1.316003] [<8010c9b8>] (show_stack) from [<805016b4>] (dump_stack+0xb4/0xe0)
[    1.323218] [<805016b4>] (dump_stack) from [<80182dec>] (register_lock_class+0x25c/0x8f4)
[    1.331391] [<80182dec>] (register_lock_class) from [<8017ee34>] (__lock_acquire+0xb4/0x2ee4)
[    1.339901] [<8017ee34>] (__lock_acquire) from [<8018291c>] (lock_acquire+0x424/0x4c8)
[    1.347813] [<8018291c>] (lock_acquire) from [<808597b0>] (_raw_spin_lock_irqsave+0x54/0x68)
[    1.356242] [<808597b0>] (_raw_spin_lock_irqsave) from [<80582e94>] (uart_add_one_port+0x384/0x510)
[    1.365276] [<80582e94>] (uart_add_one_port) from [<8058b4d0>] (owl_uart_probe+0x1bc/0x248)
[    1.373621] [<8058b4d0>] (owl_uart_probe) from [<8059c0e4>] (platform_drv_probe+0x48/0x94)
[    1.381874] [<8059c0e4>] (platform_drv_probe) from [<805997c4>] (really_probe+0x200/0x470)
[    1.390123] [<805997c4>] (really_probe) from [<80599c80>] (driver_probe_device+0x16c/0x1bc)
[    1.398461] [<80599c80>] (driver_probe_device) from [<80599f18>] (device_driver_attach+0x44/0x60)
[    1.407317] [<80599f18>] (device_driver_attach) from [<8059a078>] (__driver_attach+0x144/0x14c)
[    1.416000] [<8059a078>] (__driver_attach) from [<805978ac>] (bus_for_each_dev+0x5c/0xb4)
[    1.424162] [<805978ac>] (bus_for_each_dev) from [<8059896c>] (bus_add_driver+0x118/0x204)
[    1.432410] [<8059896c>] (bus_add_driver) from [<8059ae6c>] (driver_register+0xbc/0xf8)
[    1.440405] [<8059ae6c>] (driver_register) from [<80c1fd24>] (owl_uart_init+0x20/0x40)
[    1.448313] [<80c1fd24>] (owl_uart_init) from [<801021d8>] (do_one_initcall+0x184/0x3a4)
[    1.456399] [<801021d8>] (do_one_initcall) from [<80c01100>] (kernel_init_freeable+0x264/0x2e4)
[    1.465085] [<80c01100>] (kernel_init_freeable) from [<80850a88>] (kernel_init+0x8/0x110)
[    1.473249] [<80850a88>] (kernel_init) from [<80100114>] (ret_from_fork+0x14/0x20)
[    1.480800] Exception stack(0xee8bdfb0 to 0xee8bdff8)
[    1.485841] dfa0:                                     00000000 00000000 00000000 00000000
[    1.494002] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    1.502162] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[    1.508914] printk: console [ttyOWL2] enabled

The locking issue occurs in uart_configure_port() when trying to
guard the call to set_mctrl().

uart_add_one_port() should normally initialize the spinlock via
uart_port_spin_lock_init(), but it never happens because the port is
detected as a console and, as a consequence, the spinlock is expected
to be already initialized.

The commit a3cb39d258ef
("serial: core: Allow detach and attach serial device for console")
changed the lock initialization logic to assume the spinlock is
initialized even if the console is not enabled.

Therefore, initialize the lock explicitly in owl_uart_probe(), before
attempting to invoke uart_add_one_port().

Fixes: a3cb39d258ef ("serial: core: Allow detach and attach serial device for console")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxx>
---
 drivers/tty/serial/owl-uart.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c
index c149f8c30007..c2fa2f15d50a 100644
--- a/drivers/tty/serial/owl-uart.c
+++ b/drivers/tty/serial/owl-uart.c
@@ -705,6 +705,8 @@ static int owl_uart_probe(struct platform_device *pdev)
 	owl_uart_ports[pdev->id] = owl_port;
 	platform_set_drvdata(pdev, owl_port);
 
+	spin_lock_init(&owl_port->port.lock);
+
 	ret = uart_add_one_port(&owl_uart_driver, &owl_port->port);
 	if (ret)
 		owl_uart_ports[pdev->id] = NULL;
-- 
2.26.2


_______________________________________________
linux-actions mailing list
linux-actions@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-actions



[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux