Re: [PATCH 2/7] dt-bindings: mmc: Add Actions Semi SD/MMC/SDIO controller binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am 08.06.19 um 21:53 schrieb Manivannan Sadhasivam:
> Add devicetree binding for Actions Semi Owl SoC's SD/MMC/SDIO controller.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/mmc/owl-mmc.txt       | 37 +++++++++++++++++++
>  1 file changed, 37 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mmc/owl-mmc.txt

Rob, should this be YAML now?

> 
> diff --git a/Documentation/devicetree/bindings/mmc/owl-mmc.txt b/Documentation/devicetree/bindings/mmc/owl-mmc.txt
> new file mode 100644
> index 000000000000..a702f8d66cec
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/owl-mmc.txt
> @@ -0,0 +1,37 @@
> +Actions Semi Owl SoCs SD/MMC/SDIO controller
> +
> +Required properties:
> +- compatible: should be "actions,owl-mmc"
> +- reg: offset and length of the register set for the device.
> +- interrupts: single interrupt specifier.
> +- clocks: single clock specifier of the controller clock.
> +- resets: phandle to the reset line.
> +- dma-names: should be "mmc".
> +- dmas: single DMA channel specifier

I recall the main blocker for MMC being regulators, i.e. the I²C
attached multi-function PMIC. Yet I don't see any such required property
here, nor any patch series implementing it. Seems like this relies on
U-Boot having initialized SD/eMMC? Do you intend to make them optional
or did you want to hold off merging this one until the rest is done?

> +
> +Optional properties:
> +- pinctrl-names: pinctrl state names "default" must be defined.
> +- pinctrl-0: phandle referencing pin configuration of the controller.
> +- bus-width: see mmc.txt
> +- cap-sd-highspeed: see mmc.txt
> +- cap-mmc-highspeed: see mmc.txt
> +- sd-uhs-sdr12: see mmc.txt
> +- sd-uhs-sdr25: see mmc.txt
> +- sd-uhs-sdr50: see mmc.txt
> +- non-removable: see mmc.txt

I'm not convinced duplicating common properties is a good idea here, in
particular pinctrl.

Regards,
Andreas

> +
> +Example:
> +
> +		mmc0: mmc@e0330000 {
> +			compatible = "actions,owl-mmc";
> +			reg = <0x0 0xe0330000 0x0 0x4000>;
> +			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cmu CLK_SD0>;
> +			resets = <&cmu RESET_SD0>;
> +			dmas = <&dma 2>;
> +			dma-names = "mmc";
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&mmc0_default>;
> +			bus-width = <4>;
> +			cap-sd-highspeed;
> +		};
> 


-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Mary Higgins, Sri Rasiah
HRB 21284 (AG Nürnberg)

_______________________________________________
linux-actions mailing list
linux-actions@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-actions




[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux