There is no driver present, remove the device creation and other leftovers.
Note, for Intel Merrifield there is another driver which is instantiated by
a certain MFD one and does not need any support from device_libs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
.../platform/intel-mid/device_libs/Makefile | 2 -
.../device_libs/platform_mrfld_power_btn.c | 78 -------------------
.../device_libs/platform_msic_power_btn.c | 31 --------
3 files changed, 111 deletions(-)
delete mode 100644 arch/x86/platform/intel-mid/device_libs/platform_mrfld_power_btn.c
delete mode 100644 arch/x86/platform/intel-mid/device_libs/platform_msic_power_btn.c
diff --git a/arch/x86/platform/intel-mid/device_libs/Makefile b/arch/x86/platform/intel-mid/device_libs/Makefile
index 3688e62ccf80..177e91d565ca 100644
--- a/arch/x86/platform/intel-mid/device_libs/Makefile
+++ b/arch/x86/platform/intel-mid/device_libs/Makefile
@@ -8,7 +8,6 @@ obj-$(subst m,y,$(CONFIG_BRCMFMAC_SDIO)) += platform_bcm43xx.o
obj-$(subst m,y,$(CONFIG_BT_HCIUART_BCM)) += platform_bt.o
# IPC Devices
obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic.o
-obj-$(subst m,y,$(CONFIG_INTEL_MID_POWER_BUTTON)) += platform_msic_power_btn.o
obj-$(subst m,y,$(CONFIG_INTEL_MFLD_THERMAL)) += platform_msic_thermal.o
# SPI Devices
obj-$(subst m,y,$(CONFIG_SPI_SPIDEV)) += platform_mrfld_spidev.o
@@ -24,5 +23,4 @@ obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_pcal9555a.o
obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_tca6416.o
# MISC Devices
obj-$(subst m,y,$(CONFIG_KEYBOARD_GPIO)) += platform_gpio_keys.o
-obj-$(subst m,y,$(CONFIG_INTEL_MID_POWER_BUTTON)) += platform_mrfld_power_btn.o
obj-$(subst m,y,$(CONFIG_RTC_DRV_CMOS)) += platform_mrfld_rtc.o
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_mrfld_power_btn.c b/arch/x86/platform/intel-mid/device_libs/platform_mrfld_power_btn.c
deleted file mode 100644
index ec2afb41b34a..000000000000
--- a/arch/x86/platform/intel-mid/device_libs/platform_mrfld_power_btn.c
+++ /dev/null
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Intel Merrifield power button support
- *
- * (C) Copyright 2017 Intel Corporation
- *
- * Author: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- */
-
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/sfi.h>
-
-#include <asm/intel-mid.h>
-#include <asm/intel_scu_ipc.h>
-
-static struct resource mrfld_power_btn_resources[] = {
- {
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device mrfld_power_btn_dev = {
- .name = "msic_power_btn",
- .id = PLATFORM_DEVID_NONE,
- .num_resources = ARRAY_SIZE(mrfld_power_btn_resources),
- .resource = mrfld_power_btn_resources,
-};
-
-static int mrfld_power_btn_scu_status_change(struct notifier_block *nb,
- unsigned long code, void *data)
-{
- if (code == SCU_DOWN) {
- platform_device_unregister(&mrfld_power_btn_dev);
- return 0;
- }
-
- return platform_device_register(&mrfld_power_btn_dev);
-}
-
-static struct notifier_block mrfld_power_btn_scu_notifier = {
- .notifier_call = mrfld_power_btn_scu_status_change,
-};
-
-static int __init register_mrfld_power_btn(void)
-{
- if (intel_mid_identify_cpu() != INTEL_MID_CPU_CHIP_TANGIER)
- return -ENODEV;
-
- /*
- * We need to be sure that the SCU IPC is ready before
- * PMIC power button device can be registered:
- */
- intel_scu_notifier_add(&mrfld_power_btn_scu_notifier);
-
- return 0;
-}
-arch_initcall(register_mrfld_power_btn);
-
-static void __init *mrfld_power_btn_platform_data(void *info)
-{
- struct resource *res = mrfld_power_btn_resources;
- struct sfi_device_table_entry *pentry = info;
-
- res->start = res->end = pentry->irq;
- return NULL;
-}
-
-static const struct devs_id mrfld_power_btn_dev_id __initconst = {
- .name = "bcove_power_btn",
- .type = SFI_DEV_TYPE_IPC,
- .delay = 1,
- .msic = 1,
- .get_platform_data = &mrfld_power_btn_platform_data,
-};
-
-sfi_device(mrfld_power_btn_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_power_btn.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_power_btn.c
deleted file mode 100644
index 3d3de2d59726..000000000000
--- a/arch/x86/platform/intel-mid/device_libs/platform_msic_power_btn.c
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_msic_power_btn.c: MSIC power btn platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@xxxxxxxxx>
- */
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/scatterlist.h>
-#include <linux/sfi.h>
-#include <linux/init.h>
-#include <linux/mfd/intel_msic.h>
-#include <asm/intel-mid.h>
-
-#include "platform_msic.h"
-
-static void __init *msic_power_btn_platform_data(void *info)
-{
- return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_POWER_BTN);
-}
-
-static const struct devs_id msic_power_btn_dev_id __initconst = {
- .name = "msic_power_btn",
- .type = SFI_DEV_TYPE_IPC,
- .delay = 1,
- .msic = 1,
- .get_platform_data = &msic_power_btn_platform_data,
-};
-
-sfi_device(msic_power_btn_dev_id);
--
2.29.2
