Re: [RFC PATCH v3 14/16] cxl/mem: Use CEL for enabling commands

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 21-01-14 18:02:11, Jonathan Cameron wrote:
> On Mon, 11 Jan 2021 14:51:19 -0800
> Ben Widawsky <ben.widawsky@xxxxxxxxx> wrote:
> 
> > The Command Effects Log (CEL) is specified in the CXL 2.0 specification.
> > The CEL is one of two types of logs, the other being vendor specific.
> > They are distinguished in hardware/spec via UUID. The CEL is immediately
> > useful for 2 things:
> > 1. Determine which optional commands are supported by the CXL device.
> > 2. Enumerate any vendor specific commands
> > 
> > The CEL can be used by the driver to determine which commands are
> > available in the hardware (though it isn't, yet). That set of commands
> > might itself be a subset of commands which are available to be used via
> > CXL_MEM_SEND_COMMAND IOCTL.
> > 
> > Prior to this, all commands that the driver exposed were explicitly
> > enabled. After this, only those commands that are found in the CEL are
> > enabled.
> > 
> > Signed-off-by: Ben Widawsky <ben.widawsky@xxxxxxxxx>
> 
> This patch made me wonder if the model for the command in quite right.
> I think it would end up simpler with a pair of payload pointers for send
> and receive (that can be equal when it makes sense).
> 
> A few other things inline.
> 
> Jonathan

I'll address the others separately, but could you elaborate on this? I'm not
sure I follow your meaning.

[snip]





[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux