On Thu, Nov 12, 2020 at 4:58 PM Andy Shevchenko
<andriy.shevchenko@xxxxxxxxxxxxxxx> wrote:
>
> The commit 9c19b8930d2c ("rtc: ds1307: Add ACPI support") added non-valid
s/non-valid/invalid/ ?
> ACPI IDs (all of them abusing ACPI specification). Moreover there is
> no even a single evidence that vendor registered any of such device.
"not even" and "devices".
> Remove broken ACPI IDs from the driver. For prototyping one may use PRP0001
> with device tree defined bindings.
"with device properties adhering to a DT binding". ?
> The following patches will add support of that to the driver.
>
> Link: https://uefi.org/PNP_ACPI_Registry
> Cc: Tin Huynh <tnhuynh@xxxxxxx>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> ---
> drivers/rtc/rtc-ds1307.c | 36 +-----------------------------------
> 1 file changed, 1 insertion(+), 35 deletions(-)
>
> diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
> index 9f5f54ca039d..fcb8e281abd5 100644
> --- a/drivers/rtc/rtc-ds1307.c
> +++ b/drivers/rtc/rtc-ds1307.c
> @@ -8,7 +8,6 @@
> * Copyright (C) 2012 Bertrand Achard (nvram access fixes)
> */
>
> -#include <linux/acpi.h>
> #include <linux/bcd.h>
> #include <linux/i2c.h>
> #include <linux/init.h>
> @@ -1169,31 +1168,6 @@ static const struct of_device_id ds1307_of_match[] = {
> MODULE_DEVICE_TABLE(of, ds1307_of_match);
> #endif
>
> -#ifdef CONFIG_ACPI
> -static const struct acpi_device_id ds1307_acpi_ids[] = {
> - { .id = "DS1307", .driver_data = ds_1307 },
> - { .id = "DS1308", .driver_data = ds_1308 },
> - { .id = "DS1337", .driver_data = ds_1337 },
> - { .id = "DS1338", .driver_data = ds_1338 },
> - { .id = "DS1339", .driver_data = ds_1339 },
> - { .id = "DS1388", .driver_data = ds_1388 },
> - { .id = "DS1340", .driver_data = ds_1340 },
> - { .id = "DS1341", .driver_data = ds_1341 },
> - { .id = "DS3231", .driver_data = ds_3231 },
> - { .id = "M41T0", .driver_data = m41t0 },
> - { .id = "M41T00", .driver_data = m41t00 },
> - { .id = "M41T11", .driver_data = m41t11 },
> - { .id = "MCP7940X", .driver_data = mcp794xx },
> - { .id = "MCP7941X", .driver_data = mcp794xx },
> - { .id = "PT7C4338", .driver_data = ds_1307 },
> - { .id = "RX8025", .driver_data = rx_8025 },
> - { .id = "ISL12057", .driver_data = ds_1337 },
> - { .id = "RX8130", .driver_data = rx_8130 },
> - { }
> -};
> -MODULE_DEVICE_TABLE(acpi, ds1307_acpi_ids);
> -#endif
> -
> /*
> * The ds1337 and ds1339 both have two alarms, but we only use the first
> * one (with a "seconds" field). For ds1337 we expect nINTA is our alarm
> @@ -1794,14 +1768,7 @@ static int ds1307_probe(struct i2c_client *client,
> chip = &chips[id->driver_data];
> ds1307->type = id->driver_data;
> } else {
> - const struct acpi_device_id *acpi_id;
> -
> - acpi_id = acpi_match_device(ACPI_PTR(ds1307_acpi_ids),
> - ds1307->dev);
> - if (!acpi_id)
> - return -ENODEV;
> - chip = &chips[acpi_id->driver_data];
> - ds1307->type = acpi_id->driver_data;
> + return -ENODEV;
> }
>
> want_irq = client->irq > 0 && chip->alarm;
> @@ -2065,7 +2032,6 @@ static struct i2c_driver ds1307_driver = {
> .driver = {
> .name = "rtc-ds1307",
> .of_match_table = of_match_ptr(ds1307_of_match),
> - .acpi_match_table = ACPI_PTR(ds1307_acpi_ids),
> },
> .probe = ds1307_probe,
> .id_table = ds1307_id,
> --
> 2.28.0
>
