Re: [RFC] Documentation: Add documentation for new performance_profile sysfs class

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 10/12/20 6:42 PM, Rafael J. Wysocki wrote:
On Wed, Oct 7, 2020 at 8:41 PM Limonciello, Mario
<Mario.Limonciello@xxxxxxxx> wrote:

On Wed, 2020-10-07 at 15:58 +0000, Limonciello, Mario wrote:

On Mon, 2020-10-05 at 12:58 +0000, Limonciello, Mario wrote:
On modern systems CPU/GPU/... performance is often dynamically
configurable
in the form of e.g. variable clock-speeds and TPD. The
performance
is often
automatically adjusted to the load by some automatic-mechanism
(which may
very well live outside the kernel).

These auto performance-adjustment mechanisms often can be
configured with
one of several performance-profiles, with either a bias towards
low-power
consumption (and cool and quiet) or towards performance (and
higher
power
consumption and thermals).

Introduce a new performance_profile class/sysfs API which
offers a
generic
API for selecting the performance-profile of these automatic-
mechanisms.


If introducing an API for this - let me ask the question, why
even let each
driver offer a class interface and userspace need to change
"each" driver's
performance setting?

I would think that you could just offer something kernel-wide
like
/sys/power/performance-profile

Userspace can read and write to a single file.  All drivers can
get notified
on this sysfs file changing.

The systems that react in firmware (such as the two that prompted
this discussion) can change at that time.  It leaves the
possibility for a
more open kernel implementation that can do the same thing though
too by
directly modifying device registers instead of ACPI devices.

The problem, as I've mentioned in previous discussions we had about
this, is that, as you've seen in replies to this mail, this would
suddenly be making the kernel apply policy.

There's going to be pushback as soon as policy is enacted in the
kernel, and you take away the different knobs for individual
components
(or you can control them centrally as well as individually). As
much as
I hate the quantity of knobs[1], I don't think that trying to
reduce
the number of knobs in the kernel is a good use of our time, and
easier
to enact, coordinated with design targets, in user-space.

Unless you can think of a way to implement this kernel wide setting
without adding one more exponent on the number of possibilities for
the
testing matrix, I'll +1 Hans' original API.

Actually I offered two proposals in my reply.  So are you NAKing
both?

No, this is only about the first portion of the email, which I quoted.
And I'm not NAK'ing it, but I don't see how it can work without being
antithetical to what kernel "users" expect, or what the folks consuming
those interfaces (presumably us both) would expect to be able to test
and maintain.


(Just so others are aware, Bastien and I had a previous discussion on this topic
that he alluded to here: https://gitlab.freedesktop.org/hadess/power-profiles-daemon/-/issues/1)

In general I agree that we shouldn't be offering 100's of knobs to change
things and protect users from themselves where possible.

Whether the decisions are made in the kernel or in userspace you still have a matrix once
you're letting someone change 2 different kernel devices that offer policy.  I'd argue it's
actually worse if you let userspace change it though.

Let's go back to the my GPU and platform example and lets say both offer the new knob here
for both.  Userspace software such as your PPD picks performance.  Both the platform device
and GPU device get changed, hopefully no conflicts.
Then user decides no, I don't want my GPU in performance mode, I only want my platform.
So they change the knob for the GPU manually, and now you have a new config in your matrix.

However if you left it to a single kernel knob, both GPU and platform get moved together and
you don't have these extra configs in your matrix anymore.

The other point I mentioned, that platform might also do something to GPU via a sideband and
you race, you can solve it with kernel too by modifying the ordering the kernel handles it.

Userspace however, you give two knobs and now you have to worry about them getting it right
and supporting them doing them in the wrong order.

The other one suggested to use the same firmware attributes class
being
introduced by the new Dell driver (
https://patchwork.kernel.org/patch/11818343/)
since this is actually a knob to a specific firmware setting.

This seemed to me like an implementation detail (eg. the same metadata
is being exported, but in a different way), and I don't feel strongly
about it either way.

OK thanks.

IMV there are two choices here:  One is between exposing the low-level
interfaces verbatim to user space and wrapping them up into a certain
"translation" layer allowing user space to use a unified interface (I
think that is what everybody wants) and the other  boils down to how
the unified interface between the kernel and user space will look
like.

Personally, I think that something line /sys/power/profile allowing
drivers (and other kernel entities) to register callbacks might work
(as stated in my last reply to Hans).

Note to others reading along I pointed to this thread in this thread:
https://lore.kernel.org/linux-pm/20201006122024.14539-1-daniel.lezcano@xxxxxxxxxx/T/#t
and Rafael's "last reply" above refers to his reply in that thread.

For the sake of people reading along I'm reproducing my reply
there below.

Rafael, it seems more appropriate to continue this discussion
in this thread, so lets discuss this further here ?

My reply to Rafael from the other thread:

First of all thank you for your input, with your expertise in this
area your input is very much appreciated, after all we only get
one chance to get the userspace API for this right.

Your proposal to have a single sysfs file for userspace to talk
to and then use an in kernel subscription mechanism for drivers
to get notified of writes to this file is interesting.

But I see 2 issues with it:

1. How will userspace know which profiles are actually available ?

An obvious solution is to pick a set of standard names and let
subscribers map those as close to their own settings as possible,
the most often mentioned set of profile names in this case seems to be:

low_power
balanced_power
balanced
balanced_performance
performance

Which works fine for the thinkpad_acpi case, but not so much for
the hp-wmi case. In the HP case what happens is that a WMI call
is made which sets a bunch of ACPI variables which influence
the DPTF code (this assumes we have some sort of DPTF support
such as mjg59's reverse engineered support) but the profile-names
under Windows are: "Performance", "HP recommended", "Cool" and
"Quiet".  If you read the discussion from the
"[RFC] Documentation: Add documentation for new performance_profile sysfs class"
thread you will see this was brought up as an issue there.

The problem here is that both "cool" and "quiet" could be
interpreted as low-power. But it seems that they actually mean
what they say, cool focuses on keeping temps low, which can
also be done by making the fan-profile more aggressive. And quiet
is mostly about keeping fan speeds down, at the cost of possible
higher temperatures.

<edit in this version of the reply:>
I wonder if the HP profiles are actually just fan speed profiles ?
Elia do you know ?
</edit>

IOW we don't really have a 1 dimensional axis.
My class proposal fixes this by having a notion of both
standardized names (because anything else would suck) combined
with a way for drivers to advertise which standardized names
the support. So in my proposal I simply add quiet and cool
to the list of standard profile names, and then the HP-wmi
driver can list those as supported, while not listing
low_power as a supported profile.  This way we export the
hardware interface to userspace as is (as much as possible)
while still offering a standardized interface for userspace
to consume.  Granted if userspace now actually want to set
a low_power profile, we have just punted the problem to userspace
but I really do not see a better solution.


2. This only works assuming that all performance-profiles
are system wide. But given a big desktop case there might
be very well be separate cooling zones for e.g. the CPU
and the GPU and I can imagine both having separate
performance-profile settings and some users will doubtlessly
want to be able to control these separately ...

Regards,

Hans




[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux