RE: [PATCH v15 0/2] ACPI / APEI: Add support to notify the vendor specific HW errors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

Can you help to merge this series?

Thanks,
Shiju

>-----Original Message-----
>From: Linuxarm [mailto:linuxarm-bounces@xxxxxxxxxx] On Behalf Of Shiju
>Jose
>Sent: 03 September 2020 13:35
>To: linux-acpi@xxxxxxxxxxxxxxx; linux-pci@xxxxxxxxxxxxxxx; linux-
>kernel@xxxxxxxxxxxxxxx; rjw@xxxxxxxxxxxxx; helgaas@xxxxxxxxxx;
>bp@xxxxxxxxx; james.morse@xxxxxxx; lorenzo.pieralisi@xxxxxxx;
>robh@xxxxxxxxxx; lenb@xxxxxxxxxx; tony.luck@xxxxxxxxx;
>dan.carpenter@xxxxxxxxxx; andriy.shevchenko@xxxxxxxxxxxxxxx
>Cc: Linuxarm <linuxarm@xxxxxxxxxx>
>Subject: [PATCH v15 0/2] ACPI / APEI: Add support to notify the vendor
>specific HW errors
>
>CPER records describing a firmware-first error are identified by GUID.
>The ghes driver currently logs, but ignores any unknown CPER records.
>This prevents describing errors that can't be represented by a standard entry,
>that would otherwise allow a driver to recover from an error.
>The UEFI spec calls these 'Non-standard Section Body' (N.2.3 of version 2.8).
>
>patch set
>1. add the notifier chain for these non-standard/vendor-records
>   in the ghes driver.
>
>2. add the driver to handle HiSilicon HIP PCIe controller's errors.
>
>Changes:
>
>V15:
>1. Change in the HIP PCIe error handling driver
>   for a comment by Andy Shevchenko.
>   Removed "depends on ACPI" as it already depends on
>   it through ACPI_APEI_GHES.
>
>V14:
>1. Add patch[1] posted by James to the series.
>
>2. Following changes made for Bjorn's comments,
>2.1 Deleted stub code from ghes.h
>2.2 Made CONFIG_PCIE_HISI_ERR depend on CONFIG_ACPI_APEI_GHES.
>
>V13:
>1. Following changes in the HIP PCIe error handling driver.
>1.1 Add Bjorn's acked-by.
>1.2. Address the comments and macros order Bjorn mentioned.
>     Fix the words in the commit.
>
>V12:
>1. Changed the Signed-off-by tag to Co-developed-by tag in the patch
>   "ACPI / APEI: Add a notifier chain for unknown (vendor) CPER records"
>
>V11:
>1. Following modifications made by James Morse in the APEI patch
>   for the vendor error record.
>   - Removed kfifo and ghes_gdata_pool. Expanded commit message.
>
>2. Changes in the HIP PCIe error handling driver
>   for the comments by Andy Shevchenko.
>
>V10:
>1. Changes for Bjorn's comments on HIP PCIe error handler driver
>   and APEI patch.
>
>2. Changes in the HIP PCIe error handler driver
>   for the feedbacks by Andy Shevchenko.
>
>V9:
>1. Fixed 2 improvements suggested by the kbuild test robot.
>1.1 Change ghes_gdata_pool_init() as static function.
>1.2. Removed using buffer to store the error data for
>     logging in the hisi_pcie_handle_error()
>
>V8:
>1. Removed reporting the standard errors through the interface
>   because of the conflict with the recent patches in the
>   memory error handling path.
>2. Fix comments by Dan Carpenter.
>
>V7:
>1. Add changes in the APEI driver suggested by Borislav Petkov, for
>   queuing up all the non-fatal HW errors to the work queue and
>   notify the registered kernel drivers from the bottom half using
>   blocking notifier, common interface for both standard and
>   vendor-spcific errors.
>2. Fix for further feedbacks in v5 HIP PCIe error handler driver
>   by Bjorn Helgaas.
>
>V6:
>1. Fix few changes in the patch subject line suggested by Bjorn Helgaas.
>
>V5:
>1. Fix comments from James Morse.
>1.1 Changed the notification method to use the atomic_notifier_chain.
>1.2 Add the error handled status for the user space.
>
>V4:
>1. Fix for the following smatch warning in the PCIe error driver,
>   reported by kbuild test robot<lkp@xxxxxxxxx>:
>   warn: should '((((1))) << (9 + i))' be a 64 bit type?
>   if (err->val_bits & BIT(HISI_PCIE_LOCAL_VALID_ERR_MISC + i))
>	^^^ This should be BIT_ULL() because it goes up to 9 + 32.
>
>V3:
>1. Fix the comments from Bjorn Helgaas.
>
>V2:
>1. Changes in the HiSilicon PCIe controller's error handling driver
>   for the comments from Bjorn Helgaas.
>
>2. Changes in the APEI interface to support reporting the vendor error
>   for module with multiple devices, but use the same section type.
>   In the error handler will use socket id/sub module id etc to distinguish
>   the device.
>
>V1:
>1. Fix comments from James Morse.
>
>2. add driver to handle HiSilicon hip08 PCIe controller's errors,
>   which is an application of the above interface.
>
>Shiju Jose (1):
>  ACPI / APEI: Add a notifier chain for unknown (vendor) CPER records
>
>Yicong Yang (1):
>  PCI: hip: Add handling of HiSilicon HIP PCIe controller errors
>
> drivers/acpi/apei/ghes.c                 |  63 +++++
> drivers/pci/controller/Kconfig           |   7 +
> drivers/pci/controller/Makefile          |   1 +
> drivers/pci/controller/pcie-hisi-error.c | 327 +++++++++++++++++++++++
> include/acpi/ghes.h                      |  18 ++
> 5 files changed, 416 insertions(+)
> create mode 100644 drivers/pci/controller/pcie-hisi-error.c
>
>--
>2.17.1
>
>
>_______________________________________________
>Linuxarm mailing list
>Linuxarm@xxxxxxxxxx
>http://hulk.huawei.com/mailman/listinfo/linuxarm



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux