Re: [PATCH v2 05/12] ACPI/IORT: Add an input ID to acpi_dma_configure()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jul 28, 2020 at 2:48 PM Lorenzo Pieralisi
<lorenzo.pieralisi@xxxxxxx> wrote:
>
> On Wed, Jul 15, 2020 at 10:13:26AM +0100, Lorenzo Pieralisi wrote:
> > On Thu, Jul 09, 2020 at 10:35:14AM +0100, Lorenzo Pieralisi wrote:
> > > On Fri, Jun 19, 2020 at 09:20:06AM +0100, Lorenzo Pieralisi wrote:
> > > > Some HW devices are created as child devices of proprietary busses,
> > > > that have a bus specific policy defining how the child devices
> > > > wires representing the devices ID are translated into IOMMU and
> > > > IRQ controllers device IDs.
> > > >
> > > > Current IORT code provides translations for:
> > > >
> > > > - PCI devices, where the device ID is well identified at bus level
> > > >   as the requester ID (RID)
> > > > - Platform devices that are endpoint devices where the device ID is
> > > >   retrieved from the ACPI object IORT mappings (Named components single
> > > >   mappings). A platform device is represented in IORT as a named
> > > >   component node
> > > >
> > > > For devices that are child devices of proprietary busses the IORT
> > > > firmware represents the bus node as a named component node in IORT
> > > > and it is up to that named component node to define in/out bus
> > > > specific ID translations for the bus child devices that are
> > > > allocated and created in a bus specific manner.
> > > >
> > > > In order to make IORT ID translations available for proprietary
> > > > bus child devices, the current ACPI (and IORT) code must be
> > > > augmented to provide an additional ID parameter to acpi_dma_configure()
> > > > representing the child devices input ID. This ID is bus specific
> > > > and it is retrieved in bus specific code.
> > > >
> > > > By adding an ID parameter to acpi_dma_configure(), the IORT
> > > > code can map the child device ID to an IOMMU stream ID through
> > > > the IORT named component representing the bus in/out ID mappings.
> > > >
> > > > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
> > > > Cc: Will Deacon <will@xxxxxxxxxx>
> > > > Cc: Hanjun Guo <guohanjun@xxxxxxxxxx>
> > > > Cc: Sudeep Holla <sudeep.holla@xxxxxxx>
> > > > Cc: Catalin Marinas <catalin.marinas@xxxxxxx>
> > > > Cc: Robin Murphy <robin.murphy@xxxxxxx>
> > > > Cc: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
> > > > ---
> > > >  drivers/acpi/arm64/iort.c | 59 +++++++++++++++++++++++++++++----------
> > > >  drivers/acpi/scan.c       |  8 ++++--
> > > >  include/acpi/acpi_bus.h   |  9 ++++--
> > > >  include/linux/acpi.h      |  7 +++++
> > > >  include/linux/acpi_iort.h |  7 +++--
> > > >  5 files changed, 67 insertions(+), 23 deletions(-)
> > >
> > > Hi Rafael,
> > >
> > > just to ask if the ACPI core changes in this patch are OK with you,
> > > thank you very much.

Sorry for the delay, I was offline last week.

> > Hi Rafael,
> >
> > are you OK with ACPI core changes in this patch ?

Yes, I am.

Please feel free to route it through whatever tree you think would be
appropriate.

Thanks!



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux