This patch series provides ACPI support for dpaa2 MAC driver. This also introduces ACPI mechanism to get PHYs registered on a MDIO bus and provide them to be connected to MAC. Previous discussions on this patchset is available at: https://lore.kernel.org/linux-acpi/20200715090400.4733-1-calvin.johnson@xxxxxxxxxxx/T/#t Patch "net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver" depends on https://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/linux.git/commit/?h=acpi/for-next&id=c279c4cf5bcd3c55b4fb9709d9036cd1bfe3beb8 Remaining patches are independent of the above patch and can be applied without any issues. Device Tree can be tested on LX2160A-RDB with the below change which is also available in the above referenced patches: --- a/drivers/bus/fsl-mc/fsl-mc-bus.c +++ b/drivers/bus/fsl-mc/fsl-mc-bus.c @@ -931,6 +931,7 @@ static int fsl_mc_bus_probe(struct platform_device *pdev) if (error < 0) goto error_cleanup_mc_io; + mc_bus_dev->dev.fwnode = pdev->dev.fwnode; mc->root_mc_bus_dev = mc_bus_dev; return 0; Changes in v7: - remove unnecessary -ve check for u32 var - assign flags to phy_dev Changes in v6: - change device_mdiobus_register() parameter position - improve documentation - change device_mdiobus_register() parameter position - clean up phylink_fwnode_phy_connect() Changes in v5: - add description - clean up if else - rename phy_find_by_fwnode() to phy_find_by_mdio_handle() - add docment for phy_find_by_mdio_handle() - error out DT in phy_find_by_mdio_handle() - clean up err return - return -EINVAL for invalid fwnode Changes in v4: - release fwnode_mdio after use - return ERR_PTR instead of NULL - introduce device_mdiobus_register() Changes in v3: - cleanup based on v2 comments - Added description for more properties - Added MDIO node DSDT entry - introduce fwnode_mdio_find_bus() - renamed and improved phy_find_by_fwnode() - cleanup based on v2 comments - move code into phylink_fwnode_phy_connect() Changes in v2: - clean up dpaa2_mac_get_node() - introduce find_phy_device() - use acpi_find_child_device() Calvin Johnson (6): Documentation: ACPI: DSD: Document MDIO PHY net: phy: introduce device_mdiobus_register() net/fsl: use device_mdiobus_register() net: phy: introduce phy_find_by_mdio_handle() phylink: introduce phylink_fwnode_phy_connect() net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver Documentation/firmware-guide/acpi/dsd/phy.rst | 90 +++++++++++++++++++ .../net/ethernet/freescale/dpaa2/dpaa2-mac.c | 70 ++++++++------- drivers/net/ethernet/freescale/xgmac_mdio.c | 3 +- drivers/net/phy/mdio_bus.c | 51 +++++++++++ drivers/net/phy/phy_device.c | 40 +++++++++ drivers/net/phy/phylink.c | 32 +++++++ include/linux/mdio.h | 1 + include/linux/phy.h | 2 + include/linux/phylink.h | 3 + 9 files changed, 260 insertions(+), 32 deletions(-) create mode 100644 Documentation/firmware-guide/acpi/dsd/phy.rst -- 2.17.1
