Hi Dan,
Documentation comments below:
On 7/20/20 3:08 PM, Dan Williams wrote:
> Abstract platform specific mechanics for nvdimm firmware activation
> behind a handful of generic ops. At the bus level ->activate_state()
> indicates the unified state (idle, busy, armed) of all DIMMs on the bus,
> and ->capability() indicates the system state expectations for activate.
> At the DIMM level ->activate_state() indicates the per-DIMM state,
> ->activate_result() indicates the outcome of the last activation
> attempt, and ->arm() attempts to transition the DIMM from 'idle' to
> 'armed'.
>
> A new hibernate_quiet_exec() facility is added to support firmware
> activation in an OS defined system quiesce state. It leverages the fact
> that the hibernate-freeze state wants to assert that a memory
> hibernation snapshot can be taken. This is in contrast to a platform
> firmware defined quiesce state that may forcefully quiet the memory
> controller independent of whether an individual device-driver properly
> supports hibernate-freeze.
>
> The libnvdimm sysfs interface is extended to support detection of a
> firmware activate capability. The mechanism supports enumeration and
> triggering of firmware activate, optionally in the
> hibernate_quiet_exec() context.
>
> Cc: Pavel Machek <pavel@xxxxxx>
> Cc: Ira Weiny <ira.weiny@xxxxxxxxx>
> Cc: Len Brown <len.brown@xxxxxxxxx>
> Cc: Jonathan Corbet <corbet@xxxxxxx>
> Cc: Dave Jiang <dave.jiang@xxxxxxxxx>
> Cc: Vishal Verma <vishal.l.verma@xxxxxxxxx>
> [rafael: hibernate_quiet_exec() proposal]
> Co-developed-by: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
> Signed-off-by: Dan Williams <dan.j.williams@xxxxxxxxx>
> ---
> Documentation/ABI/testing/sysfs-bus-nvdimm | 2
> .../driver-api/nvdimm/firmware-activate.rst | 86 ++++++++++++
> drivers/nvdimm/core.c | 149 ++++++++++++++++++++
> drivers/nvdimm/dimm_devs.c | 115 +++++++++++++++
> drivers/nvdimm/nd-core.h | 1
> include/linux/libnvdimm.h | 44 ++++++
> include/linux/suspend.h | 6 +
> kernel/power/hibernate.c | 97 +++++++++++++
> 8 files changed, 500 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-bus-nvdimm
> create mode 100644 Documentation/driver-api/nvdimm/firmware-activate.rst
> diff --git a/Documentation/driver-api/nvdimm/firmware-activate.rst b/Documentation/driver-api/nvdimm/firmware-activate.rst
> new file mode 100644
> index 000000000000..9eb98aa833c5
> --- /dev/null
> +++ b/Documentation/driver-api/nvdimm/firmware-activate.rst
> @@ -0,0 +1,86 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +==================================
> +NVDIMM Runtime Firmware Activation
> +==================================
> +
> +Some persistent memory devices run a firmware locally on the device /
run firmware
> +"DIMM" to perform tasks like media management, capacity provisioning,
> +and health monitoring. The process of updating that firmware typically
> +involves a reboot because it has implications for in-flight memory
> +transactions. However, reboots are disruptive and at least the Intel
> +persistent memory platform implementation, described by the Intel ACPI
> +DSM specification [1], has added support for activating firmware at
that's an Intel spec? just checking.
> +runtime.
> +
> +A native sysfs interface is implemented in libnvdimm to allow platform
platforms
> +to advertise and control their local runtime firmware activation
> +capability.
> +
> +The libnvdimm bus object, ndbusX, implements an ndbusX/firmware/activate
> +attribute that shows the state of the firmware activation as one of 'idle',
> +'armed', 'overflow', and 'busy'.
or
> +
> +- idle:
> + No devices are set / armed to activate firmware
> +
> +- armed:
> + At least one device is armed
> +
> +- busy:
> + In the busy state armed devices are in the process of transitioning
> + back to idle and completing an activation cycle.
> +
> +- overflow:
> + If the platform has a concept of incremental work needed to perform
> + the activation it could be the case that too many DIMMs are armed for
> + activation. In that scenario the potential for firmware activation to
> + timeout is indicated by the 'overflow' state.
> +
> +The 'ndbusX/firmware/activate' property can be written with a value of
> +either 'live', or 'quiesce'. A value of 'quiesce' triggers the kernel to
> +run firmware activation from within the equivalent of the hibernation
> +'freeze' state where drivers and applications are notified to stop their
> +modifications of system memory. A value of 'live' attempts
> +firmware-activation without this hibernation cycle. The
no hyphen^^
> +'ndbusX/firmware/activate' property will be elided completely if no
> +firmware activation capability is detected.
> +
> +Another property 'ndbusX/firmware/capability' indicates a value of
> +'live', or 'quiesce'. Where 'live' indicates that the firmware
no comma. no period. So this:
+'live' or 'quiesce', where
> +does not require or inflict any quiesce period on the system to update
> +firmware. A capability value of 'quiesce' indicates that firmware does
> +expect and injects a quiet period for the memory controller, but 'live'
> +may still be written to 'ndbusX/firmware/activate' as an override to
> +assume the risk of racing firmware update with in-flight device and
> +application activity. The 'ndbusX/firmware/capability' property will be
> +elided completely if no firmware activation capability is detected.
> +
> +The libnvdimm memory-device / DIMM object, nmemX, implements
> +'nmemX/firmware/activate' and 'nmemX/firmware/result' attributes to
> +communicate the per-device firmware activation state. Similar to the
> +'ndbusX/firmware/activate' attribute, the 'nmemX/firmware/activate'
> +attribute indicates 'idle', 'armed', or 'busy'. The state transitions
> +from 'armed' to 'idle' when the system is prepared to activate firmware,
> +firmware staged + state set to armed, and 'ndbusX/firmware/activate' is
> +triggered. After that activation event the nmemX/firmware/result
> +attribute reflects the state of the last activation as one of:
> +
> +- none:
> + No runtime activation triggered since the last time the device was reset
> +
> +- success:
> + The last runtime activation completed successfully.
> +
> +- fail:
> + The last runtime activation failed for device-specific reasons.
> +
> +- not_staged:
> + The last runtime activation failed due to a sequencing error of the
> + firmware image not being staged.
> +
> +- need_reset:
> + Runtime firmware activation failed, but the firmware can still be
> + activated via the legacy method of power-cycling the system.
> +
> +[1]: https://docs.pmem.io/persistent-memory/
thanks.
--
~Randy
