On 6/16/20 10:29 AM, Andrzej Pietrasiewicz wrote:
> Document inhibiting input devices and its relation to being
> a wakeup source.
>
> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxxxx>
> ---
Hi,
I have some editorial comments. Please see below.
> @Hans, @Dmitry,
>
> My fist attempt at documenting inhibiting. Kindly look at it to see if I haven't got anything
> wrong.
>
> Andrzej
>
> Documentation/input/input-programming.rst | 36 +++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
> diff --git a/Documentation/input/input-programming.rst b/Documentation/input/input-programming.rst
> index 45a4c6e05e39..0cd1ad4504fb 100644
> --- a/Documentation/input/input-programming.rst
> +++ b/Documentation/input/input-programming.rst
> @@ -164,6 +164,42 @@ disconnects. Calls to both callbacks are serialized.
> The open() callback should return a 0 in case of success or any nonzero value
> in case of failure. The close() callback (which is void) must always succeed.
>
> +Inhibiting input devices
> +~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +Inhibiting a device means ignoring input events from it. As such it is about maintaining
> +relationships with input handlers - either an already existing relationships, or
> +relationships to be established while the device is in inhibited state.
> +
> +If a device is inhibited, no input handler will receive events from it.
> +
> +The fact that nobody wants events from the device is exploited further, by calling device's
> +close() (if there are users) and open() (if there are users) on inhibit and uninhibit
> +operations, respectively. Indeed, the meaning of close() is to stop providing events
> +to the input core and that of open() is to start providing events to the input core.
> +
> +Inhibiting and uninhibiting is orthogonal to opening and closing the device by input
are
> +handlers. Userspace might want to inhibit a device in anticipation before any handler is
> +positively matched against it.
> +
> +Inhibiting and uninhibiting is orthogonal to device's being a wakeup source, too. Being a
are
> +wakeup source plays a role when the system is sleeping, not when the system is operating.
> +How drivers should program their interaction between inhibiting, sleeping and being a wakeup
> +source is driver-specific.
> +
> +Taking the analogy with the network devices - bringing a network interface down doesn't mean
> +that it should be impossible to be wake the system up on LAN through this interface. So, there
> +may be input drivers which should be considered wakeup sources even when inhibited. Actually,
> +in many i2c input devices their interrupt is declared a wakeup interrupt and its handling
I2C
> +happens in driver's core, which is not aware of input-specific inhibit (nor should it be).
> +Composite devices containing several interfaces can be inhibited on a per-interface basis and
> +e.g. inhibiting one interface shouldn't affect the device's capability of being a wakeup source.
> +
> +If a device is to be considered a wakeup source while inhibited, special care must be taken when
> +programming its suspend(), as it might need to call device's open(). Depending on what close()
> +means for the device in question not opening() it before going to sleep might make it impossible
in question, not
> +to provide any wakeup events. The device is going to sleep anyway.
> +
> Basic event types
> ~~~~~~~~~~~~~~~~~
>
>
thanks for documentation.
--
~Randy
