Re: slub freelist issue / BUG: unable to handle page fault for address: 000000003ffe0018

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jun 05, 2020 at 06:55:27PM +0200, Vlastimil Babka wrote:
> 
> On 6/5/20 5:44 PM, Kees Cook wrote:
> > On Fri, Jun 05, 2020 at 04:44:51PM +0200, Vegard Nossum wrote:
> >> On 2020-06-05 16:08, Vlastimil Babka wrote:
> >> > On 6/5/20 3:12 PM, Rafael J. Wysocki wrote:
> >> > > On Fri, Jun 5, 2020 at 2:48 PM Vegard Nossum <vegard.nossum@xxxxxxxxxx> wrote:
> >> > > > 
> >> > > > On 2020-06-05 11:36, Vegard Nossum wrote:
> >> > > > > 
> >> > > > > On 2020-06-05 11:11, Vlastimil Babka wrote:
> >> > > > > > So, with Kees' patch reverted, booting with slub_debug=F (or even more
> >> > > > > > specific slub_debug=F,ftrace_event_field) also hits this bug below. I
> >> > > > > > wanted to bisect it, but v5.7 was also bad, and also v5.6. Didn't try
> >> > > > > > further in history. So it's not new at all, and likely very specific to
> >> > > > > > your config+QEMU? (and related to the ACPI error messages that precede
> >> > > > > > it?).
> >> > [...]
> >> > [    0.140408] ------------[ cut here ]------------
> >> > [    0.140837] cache_from_obj: Wrong slab cache. Acpi-Namespace but object is from kmalloc-64
> >> > [    0.141406] WARNING: CPU: 0 PID: 1 at mm/slab.h:524 kmem_cache_free+0x1d3/0x250
> > 
> > Ah yes! Good. I had improved this check recently too, and I was worried
> > the freelist pointer patch was somehow blocking it, but I see now that
> > the failing config didn't have CONFIG_SLAB_FREELIST_HARDENED=y. Once
> > SLAB_CONSISTENCY_CHECKS was enabled ("slub_debug=F"), it started
> > tripping. Whew.
> > 
> > I wonder if that entire test block should just be removed from
> > cache_from_obj():
> > 
> >         if (!memcg_kmem_enabled() &&
> >             !IS_ENABLED(CONFIG_SLAB_FREELIST_HARDENED) &&
> >             !unlikely(s->flags & SLAB_CONSISTENCY_CHECKS))
> >                 return s;
> > 
> > and make this test unconditional? It's mostly only called during free(),
> > and shouldn't be too expensive to be made unconditional. Hmm.
> 
> Hmm I have a different idea. The whole cache_from_obj() was added because of
> kmemcg (commit b9ce5ef49f00d) where per-memcg cache can be different from the
> root one. And I just realized this usecase can go away with Roman's series [1].
> But cache_from_obj() also kept the original SLUB consistency check case, and you
> added the freelist hardening case. If kmemcg use case went away it would be nice
> to avoid the virt_to_cache() and check completely again, unless in debugging or
> hardened kernel.

Is it that expensive? (I'm fine with it staying behind debug/hardening,
but if we can make it on by default, that'd be safer.)

> Furthermore, the original SLUB debugging case was an unconditional pr_err() plus
> WARN_ON_ONCE(1), which was kept by commit b9ce5ef49f00d.  With freelist
> hardening this all changed to WARN_ONCE. So the second and later cases are not
> reported at all for hardening and also not for explicitly enabled debugging like
> in this case, which is IMHO not ideal.

Oh, I have no problem with WARN vs WARN_ONCE -- there's no reason to
split this. And I'd love the hardening side to gain the tracking call
too, if it's available.

I had just used WARN_ONCE() since sometimes it can be very noisy to keep
warning for some condition that might not be correctable.

> So I propose the following - the freelist hardening case keeps the WARN_ONCE,
> but also a one-line pr_err() for each case so they are not silent. The SLUB
> debugging case is always a full warning, and printing the tracking info if
> enabled and available. Pure kmemcg case does virt_to_cache() for now (until
> hopefully removed by Roman's series) but no checking at all. Would that work for
> everyone?
> [...]
> @@ -520,9 +528,18 @@ static inline struct kmem_cache *cache_from_obj(struct kmem_cache *s, void *x)
>  		return s;
>  
>  	cachep = virt_to_cache(x);
> -	WARN_ONCE(cachep && !slab_equal_or_root(cachep, s),
> -		  "%s: Wrong slab cache. %s but object is from %s\n",
> -		  __func__, s->name, cachep->name);
> +	if (unlikely(s->flags & SLAB_CONSISTENCY_CHECKS)) {
> +		if (WARN(cachep && !slab_equal_or_root(cachep, s),
> +			  "%s: Wrong slab cache. %s but object is from %s\n",
> +			  __func__, s->name, cachep->name))
> +			slab_print_tracking(cachep, x);
> +	} else if (IS_ENABLED(CONFIG_SLAB_FREELIST_HARDENED)) {
> +		if (unlikely(cachep && !slab_equal_or_root(cachep, s))) {
> +			pr_err("%s: Wrong slab cache. %s but object is from %s\n",
> +				  __func__, s->name, cachep->name);
> +			WARN_ON_ONCE(1);
> +		}
> +	}

How about just this (in addition to your slab_print_tracking() refactor):

diff --git a/mm/slab.h b/mm/slab.h
index 207c83ef6e06..107b7f6db3c3 100644
--- a/mm/slab.h
+++ b/mm/slab.h
@@ -520,9 +520,10 @@ static inline struct kmem_cache *cache_from_obj(struct kmem_cache *s, void *x)
 		return s;
 
 	cachep = virt_to_cache(x);
-	WARN_ONCE(cachep && !slab_equal_or_root(cachep, s),
+	if (WARN(cachep && !slab_equal_or_root(cachep, s),
 		  "%s: Wrong slab cache. %s but object is from %s\n",
-		  __func__, s->name, cachep->name);
+		  __func__, s->name, cachep->name))
+		slab_print_tracking(cachep, x);
 	return cachep;
 }
 

-- 
Kees Cook



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux