Make lux_per_bit and lux_per_bit_base_it settings stored in struct
cm32181_chip instead of a hardcoded (defined) values.
This is a preparation patch for reading some ACPI tables which specify
a device specific lux_per_bit value.
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/iio/light/cm32181.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/light/cm32181.c b/drivers/iio/light/cm32181.c
index ebdbc7f865f3..92f99cbb5cc1 100644
--- a/drivers/iio/light/cm32181.c
+++ b/drivers/iio/light/cm32181.c
@@ -69,6 +69,8 @@ struct cm32181_chip {
u16 conf_regs[CM32181_CONF_REG_NUM];
unsigned long init_regs_bitmap;
int calibscale;
+ int lux_per_bit;
+ int lux_per_bit_base_it;
int num_als_it;
const int *als_it_bits;
const int *als_it_values;
@@ -116,6 +118,8 @@ static int cm32181_reg_init(struct cm32181_chip *cm32181)
CM32181_CMD_ALS_IT_DEFAULT | CM32181_CMD_ALS_SM_DEFAULT;
cm32181->init_regs_bitmap = BIT(CM32181_REG_ADDR_CMD);
cm32181->calibscale = CM32181_CALIBSCALE_DEFAULT;
+ cm32181->lux_per_bit = CM32181_LUX_PER_BIT;
+ cm32181->lux_per_bit_base_it = CM32181_LUX_PER_BIT_BASE_IT;
/* Initialize registers*/
for_each_set_bit(i, &cm32181->init_regs_bitmap, CM32181_CONF_REG_NUM) {
@@ -212,8 +216,8 @@ static int cm32181_get_lux(struct cm32181_chip *cm32181)
if (ret < 0)
return -EINVAL;
- lux = CM32181_LUX_PER_BIT;
- lux *= CM32181_LUX_PER_BIT_BASE_IT;
+ lux = cm32181->lux_per_bit;
+ lux *= cm32181->lux_per_bit_base_it;
lux = div_u64(lux, als_it);
ret = i2c_smbus_read_word_data(client, CM32181_REG_ADDR_ALS);
--
2.26.0
