On Tue, 11 Feb 2020 15:59:44 +0200, Mika Westerberg wrote: > If the default timeout is short then that might happen but I think WDAT > spec had some "reasonable" lower limit. Could you please point me to the WDAT specification? Somehow my web search failed to spot it. > You may set bigger default timeout during the probe by doing something > like below. This should give some 30s time before the system is rebooted > after the device is opened. > > diff --git a/drivers/watchdog/wdat_wdt.c b/drivers/watchdog/wdat_wdt.c > index b069349b52f5..24351afe2718 100644 > --- a/drivers/watchdog/wdat_wdt.c > +++ b/drivers/watchdog/wdat_wdt.c > @@ -439,6 +439,10 @@ static int wdat_wdt_probe(struct platform_device *pdev) > platform_set_drvdata(pdev, wdat); > > watchdog_set_nowayout(&wdat->wdd, nowayout); > + > + /* Increase default timeout */ > + wdat_wdt_set_timeout(&wdat->wdd, 30 * 1000); > + > return devm_watchdog_register_device(dev, &wdat->wdd); > } That is a very valid point. We know that the device works fine when using the iTCO_wdt driver, and the iTCO_wdt driver *does* set a timeout value at probe time, it does not rely on the BIOS having set a sane value beforehand. So maybe that's the problem. Guenter, what is considered best practice for watchdog drivers in this respect? Trust the BIOS or set an arbitrary timeout value? Maybe we should read the timeout value before enabling the device, and if it is unreasonably low (< 5 seconds), log a warning and reset the value to a sane default (30 seconds)? Alternatively, or in addition to that, maybe the wdat_wdt driver should have a module parameter to set the default timeout value, as the iTCO_wdt driver has? Or is this deprecated in favor of the WDIOC_SETTIMEOUT ioctl? Problem with the ioctl is that it requires the device node to be opened, which starts the count down (I think?) -- Jean Delvare SUSE L3 Support
