[RFC][PATCH 0/6] cpuidle: intel_idle: Use ACPI _CTS to get idle states information

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi All,

The purpose of this set of patches is to allow the intel_idle driver to use
C-states information from ACPI _CST on systems where the processor is not
recognized by it.

The first five patches are preparatory (please look into the changelogs for
details) and are not expected to make any functional difference.

The last patch adds ACPI _CST support to intel_idle so that _CST is used when
the driver does not have a dedicated list of C-states for the given processor.

The plan (for the future) is to also use _CST in some cases when there is a
list of C-states for the given processor in intel_idle in order to produce a
combined list in which some states may be disabled by default.

This has been lightly tested on a Dell XPS13 9360 (with an additional patch to
drop the Kaby Lake entries from intel_idle_ids[] which normally would prevent
intel_idle from registering itself as the cpuidle driver).  The difference
between using the idle states list from _CST and the built-in one generally is
that in the latter case the processor spends more time in package C-state when
the system is idle.

If there are any concerns about this series, please let me know.

Thanks,
Rafael






[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux