On Mon, Jul 8, 2019 at 10:10 AM James Morse <james.morse@xxxxxxx> wrote:
> On 02/07/2019 17:51, Tyler Baicar OS wrote:
> > On systems that support the ARM RAS extension, synchronous external
> > abort syndrome information could be captured in the core's RAS extension
> > system registers. So, when handling SEAs check the RAS system registers
> > for error syndrome information.
>
> > diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
> > index 2d11501..76b42ca 100644
> > --- a/arch/arm64/mm/fault.c
> > +++ b/arch/arm64/mm/fault.c
> > @@ -37,6 +37,7 @@
> > #include <asm/pgtable.h>
> > #include <asm/tlbflush.h>
> > #include <asm/traps.h>
> > +#include <asm/ras.h>
> >
> > struct fault_info {
> > int (*fn)(unsigned long addr, unsigned int esr,
> > @@ -632,6 +633,8 @@ static int do_sea(unsigned long addr, unsigned int esr, struct pt_regs *regs)
> >
> > inf = esr_to_fault_info(esr);
> >
> > + arch_arm_ras_report_error();
> > +
> > /*
> > * Return value ignored as we rely on signal merging.
> > * Future patches will make this more robust.
> >
>
> If we interrupted a preemptible context, do_sea() is preemptible too... This means we
> can't know if we're still running on the same CPU as the one that took the external-abort.
> (until this series, it hasn't mattered).
>
> Fixing this means cramming something into entry.S's el1_da, as this may unmask interrupts
> before calling do_mem_abort(). But its going to be ugly because some of do_mem_abort()s
> ESR values need to be preemptible because they sleep, e.g. page-faults calling
> handle_mm_fault().
> For do_sea(), do_exit() will 'fix' the preempt count if we kill the thread, but if we
> don't, it still needs to be balanced. Doing all this in assembly is going to be unreadable!
>
> Mark Rutland has a series to move the entry assembly into C [0]. Based on that that it
> should be possible for the new el1_abort() to spot a Synchronous-External-Abort ESR, and
> wrap the do_mem_abort() with preempt enable/disable, before inheriting the flags. (which
> for synchronous exceptions, I think we should always do)
>
> [0] https://git.kernel.org/pub/scm/linux/kernel/git/mark/linux.git/log/?h=arm64/entry-deasm
Hey James,
Good catch! I didn't think the synchronous route was preemptible.
I wasn't seeing this issue when testing this on emulation, but I was able to
test and prove the issue on a Neoverse N1 SDP:
root@genericarmv8:~# echo 0x100000000 > /proc/cached_read
[ 42.985622] Reading from address 0x100000000
[ 42.989893] WARNING: CPU: 0 PID: 2812 at /home/tyler/neoverse/arm-reference-
platforms/linux/arch/arm64/kernel/cpufeature.c:1940 this_cpu_has_cap+0x68/0x78
[..]
[ 43.119083] Call trace:
[ 43.121515] this_cpu_has_cap+0x68/0x78
[ 43.125338] do_sea+0x34/0x70
[ 43.128292] do_mem_abort+0x3c/0x98
[ 43.131765] el1_da+0x20/0x94
[ 43.134722] cached_read+0x30/0x68
[ 43.138112] simple_attr_write+0xbc/0x128
[ 43.142109] proc_reg_write+0x60/0xa8
[ 43.145757] __vfs_write+0x18/0x40
[ 43.149145] vfs_write+0xa4/0x1b8
[ 43.152445] ksys_write+0x64/0xe0
[ 43.155746] __arm64_sys_write+0x14/0x20
[ 43.159654] el0_svc_common.constprop.0+0xa8/0x100
[ 43.164430] el0_svc_handler+0x28/0x78
[ 43.168165] el0_svc+0x8/0xc
[ 43.171031] ---[ end trace 2c27619659261a1d ]---
[ 43.175647] Internal error: synchronous external abort: 96000410 [#1]
PREEMPT SMP
[..]
That warning is because it's preemptible:
if (!WARN_ON(preemptible()) && n < ARM64_NCAPS) {
I'll pull Mark's series in and add the preempt enable/disable around the call
to do_mem_abort() in el1_abort() and test that out!
Thanks,
Tyler
