[PATCH v3 0/3] PCI / ACPI: Handle sibling devices sharing power resources

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi all,

This is third iteration of the patch series addressing issues around
sibling PCI devices sharing ACPI power resources.

As a concrete example in Intel Ice Lake the Thunderbolt controller, PCIe
root ports and xHCI all share the same ACPI power resources. When they are
all in D3hot power resources (returned by _PR3) can be turned off powering
off the whole block. However, there are two issues around this.

Firstly the PCI core sets the device power state by asking what the real
ACPI power state is. This results that all but last device sharing the
power resources are in D3hot when the power resources are turned off. This
causes issues if user runs for example 'lspci' because the device is really
in D3cold so what user gets back is all ones (0xffffffff).

Secondly if any of the device is runtime resumed the power resources are
turned on bringing all other devices sharing the resources to
D0uninitialized losing their wakeup configuration.

This series aims to fix the two issues by:

  1. Using the ACPI cached power state when PCI devices are transitioned
     into low power states instead of reading back the "real" power state.

  2. Introducing concept of "_PR0 dependent devices" that get runtime
     resumed whenever their power resource (which they might share with
     other sibling devices) gets turned on.

The series is based on the idea of Rafael J. Wysocki <rafael@xxxxxxxxxx>.

Previous version of the series can be found here:

  v2: https://lore.kernel.org/linux-pci/20190618161858.77834-1-mika.westerberg@xxxxxxxxxxxxxxx/T/#m7a41d0b745400054543324ce84125040dbfed912
  v1: https://www.spinics.net/lists/linux-pci/msg83583.html

Changes from v2:

  * Updated changelog of patch [1/3] according to comments I got. I left
    the D3C power resource and xHCI there because it shows that we can have
    multiple shared power resources.

  * Added link to the discussion around v2.

  * Use adev->flags.power_manageable in patch [2/3].

Mika Westerberg (3):
  PCI / ACPI: Use cached ACPI device state to get PCI device power state
  ACPI / PM: Introduce concept of a _PR0 dependent device
  PCI / ACPI: Add _PR0 dependent devices

 drivers/acpi/power.c    | 135 ++++++++++++++++++++++++++++++++++++++++
 drivers/pci/pci-acpi.c  |   5 +-
 include/acpi/acpi_bus.h |   4 ++
 3 files changed, 143 insertions(+), 1 deletion(-)

-- 
2.20.1




[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux