On Thu, 2019-06-20 at 20:31 +0200, David Hildenbrand wrote:
> @Andrew: Only patch 1, 4 and 6 changed compared to v1.
>
> Some further cleanups around memory block devices. Especially, clean up
> and simplify walk_memory_range(). Including some other minor cleanups.
>
> Compiled + tested on x86 with DIMMs under QEMU. Compile-tested on ppc64.
>
> v2 -> v3:
> - "mm/memory_hotplug: Rename walk_memory_range() and pass start+size .."
> -- Avoid warning on ppc.
> - "drivers/base/memory.c: Get rid of find_memory_block_hinted()"
> -- Fixup a comment regarding hinted devices.
>
> v1 -> v2:
> - "mm: Section numbers use the type "unsigned long""
> -- "unsigned long i" -> "unsigned long nr", in one case -> "int i"
> - "drivers/base/memory.c: Get rid of find_memory_block_hinted("
> -- Fix compilation error
> -- Get rid of the "hint" parameter completely
>
> David Hildenbrand (6):
> mm: Section numbers use the type "unsigned long"
> drivers/base/memory: Use "unsigned long" for block ids
> mm: Make register_mem_sect_under_node() static
> mm/memory_hotplug: Rename walk_memory_range() and pass start+size
> instead of pfns
> mm/memory_hotplug: Move and simplify walk_memory_blocks()
> drivers/base/memory.c: Get rid of find_memory_block_hinted()
>
> arch/powerpc/platforms/powernv/memtrace.c | 23 ++---
> drivers/acpi/acpi_memhotplug.c | 19 +---
> drivers/base/memory.c | 120 +++++++++++++---------
> drivers/base/node.c | 8 +-
> include/linux/memory.h | 5 +-
> include/linux/memory_hotplug.h | 2 -
> include/linux/mmzone.h | 4 +-
> include/linux/node.h | 7 --
> mm/memory_hotplug.c | 57 +---------
> mm/sparse.c | 12 +--
> 10 files changed, 106 insertions(+), 151 deletions(-)
>
This series causes a few machines are unable to boot triggering endless soft
lockups. Reverted those commits fixed the issue.
97f4217d1da0 Revert "mm/memory_hotplug: rename walk_memory_range() and pass
start+size instead of pfns"
c608eebf33c6 Revert "mm-memory_hotplug-rename-walk_memory_range-and-pass-
startsize-instead-of-pfns-fix"
34b5e4ab7558 Revert "mm/memory_hotplug: move and simplify walk_memory_blocks()"
59a9f3eec5d1 Revert "drivers/base/memory.c: Get rid of
find_memory_block_hinted()"
5cfcd52288b6 Revert "drivers-base-memoryc-get-rid-of-find_memory_block_hinted-
v3"
[ 4.582081][ T1] ACPI FADT declares the system doesn't support PCIe ASPM,
so disable it
[ 4.590405][ T1] ACPI: bus type PCI registered
[ 4.592908][ T1] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0x80000000-0x8fffffff] (base 0x80000000)
[ 4.601860][ T1] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in
E820
[ 4.601860][ T1] PCI: Using configuration type 1 for base access
[ 28.661336][ C16] watchdog: BUG: soft lockup - CPU#16 stuck for 22s!
[swapper/0:1]
[ 28.671351][ C16] Modules linked in:
[ 28.671354][ C16] CPU: 16 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc5-
next-20190621+ #1
[ 28.681366][ C16] Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385
Gen10, BIOS A40 03/09/2018
[ 28.691334][ C16] RIP: 0010:_raw_spin_unlock_irqrestore+0x2f/0x40
[ 28.701334][ C16] Code: 55 48 89 e5 41 54 49 89 f4 be 01 00 00 00 53 48 8b
55 08 48 89 fb 48 8d 7f 18 e8 4c 89 7d ff 48 89 df e8 94 f9 7d ff 41 54 9d <65>
ff 0d c2 44 8d 48 5b 41 5c 5d c3 0f 1f 44 00 00 0f 1f 44 00 00
[ 28.711354][ C16] RSP: 0018:ffff888205b27bf8 EFLAGS: 00000246 ORIG_RAX:
ffffffffffffff13
[ 28.721372][ C16] RAX: 0000000000000000 RBX: ffff8882053d6138 RCX:
ffffffffb6f2a3b8
[ 28.731371][ C16] RDX: 1ffff11040a7ac27 RSI: dffffc0000000000 RDI:
ffff8882053d6138
[ 28.741371][ C16] RBP: ffff888205b27c08 R08: ffffed1040a7ac28 R09:
ffffed1040a7ac27
[ 28.751334][ C16] R10: ffffed1040a7ac27 R11: ffff8882053d613b R12:
0000000000000246
[ 28.751370][ C16] R13: ffff888205b27c98 R14: ffff8884504d0a20 R15:
0000000000000000
[ 28.761368][ C16] FS: 0000000000000000(0000) GS:ffff888454500000(0000)
knlGS:0000000000000000
[ 28.771373][ C16] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 28.781334][ C16] CR2: 0000000000000000 CR3: 00000007c9012000 CR4:
00000000001406a0
[ 28.791333][ C16] Call Trace:
[ 28.791374][ C16] klist_next+0xd8/0x1c0
[ 28.791374][ C16] subsys_find_device_by_id+0x13b/0x1f0
[ 28.801334][ C16] ? bus_find_device_by_name+0x20/0x20
[ 28.801370][ C16] ? kobject_put+0x23/0x250
[ 28.811333][ C16] walk_memory_blocks+0x6c/0xb8
[ 28.811353][ C16] ? write_policy_show+0x40/0x40
[ 28.821334][ C16] link_mem_sections+0x7e/0xa0
[ 28.821369][ C16] ? unregister_memory_block_under_nodes+0x210/0x210
[ 28.831353][ C16] ? __register_one_node+0x3bd/0x600
[ 28.831353][ C16] topology_init+0xbf/0x126
[ 28.841364][ C16] ? enable_cpu0_hotplug+0x1a/0x1a
[ 28.841368][ C16] do_one_initcall+0xfe/0x45a
[ 28.851334][ C16] ? initcall_blacklisted+0x150/0x150
[ 28.851353][ C16] ? kasan_check_write+0x14/0x20
[ 28.861333][ C16] ? up_write+0x75/0x140
[ 28.861369][ C16] kernel_init_freeable+0x619/0x6ac
[ 28.871333][ C16] ? rest_init+0x188/0x188
[ 28.871353][ C16] kernel_init+0x11/0x138
[ 28.881363][ C16] ? rest_init+0x188/0x188
[ 28.881363][ C16] ret_from_fork+0x22/0x40
[ 56.661336][ C16] watchdog: BUG: soft lockup - CPU#16 stuck for 22s!
[swapper/0:1]
[ 56.671352][ C16] Modules linked in:
[ 56.671354][ C16] CPU: 16 PID: 1 Comm: swapper/0 Tainted:
G L 5.2.0-rc5-next-20190621+ #1
[ 56.681357][ C16] Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385
Gen10, BIOS A40 03/09/2018
[ 56.691356][ C16] RIP: 0010:subsys_find_device_by_id+0x168/0x1f0
[ 56.701334][ C16] Code: 48 85 c0 74 3e 48 8d 78 58 e8 14 77 ca ff 4d 8b 7e
58 4d 85 ff 74 2c 49 8d bf a0 03 00 00 e8 bf 75 ca ff 45 39 a7 a0 03 00 00 <75>
c9 4c 89 ff e8 0e 89 ff ff 48 85 c0 74 bc 48 89 df e8 21 3b 24
[ 56.721333][ C16] RSP: 0018:ffff888205b27c68 EFLAGS: 00000287 ORIG_RAX:
ffffffffffffff13
[ 56.721370][ C16] RAX: 0000000000000000 RBX: ffff888205b27c90 RCX:
ffffffffb74c9dc1
[ 56.731370][ C16] RDX: 0000000000000003 RSI: dffffc0000000000 RDI:
ffff8888774ec3e0
[ 56.741371][ C16] RBP: ffff888205b27cf8 R08: ffffed1040a7ac28 R09:
ffffed1040a7ac27
[ 56.751335][ C16] R10: ffffed1040a7ac27 R11: ffff8882053d613b R12:
0000000000085c1b
[ 56.761334][ C16] R13: 1ffff11040b64f8e R14: ffff888450de4a20 R15:
ffff8888774ec040
[ 56.761372][ C16] FS: 0000000000000000(0000) GS:ffff888454500000(0000)
knlGS:0000000000000000
[ 56.771374][ C16] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 56.781370][ C16] CR2: 0000000000000000 CR3: 00000007c9012000 CR4:
00000000001406a0
[ 56.791373][ C16] Call Trace:
[ 56.791373][ C16] ? bus_find_device_by_name+0x20/0x20
[ 56.801334][ C16] ? kobject_put+0x23/0x250
[ 56.801334][ C16] walk_memory_blocks+0x6c/0xb8
[ 56.811333][ C16] ? write_policy_show+0x40/0x40
[ 56.811353][ C16] link_mem_sections+0x7e/0xa0
[ 56.811353][ C16] ? unregister_memory_block_under_nodes+0x210/0x210
[ 56.821333][ C16] ? __register_one_node+0x3bd/0x600
[ 56.831333][ C16] topology_init+0xbf/0x126
[ 56.831355][ C16] ? enable_cpu0_hotplug+0x1a/0x1a
[ 56.841334][ C16] do_one_initcall+0xfe/0x45a
[ 56.841334][ C16] ? initcall_blacklisted+0x150/0x150
[ 56.851333][ C16] ? kasan_check_write+0x14/0x20
[ 56.851354][ C16] ? up_write+0x75/0x140
[ 56.861333][ C16] kernel_init_freeable+0x619/0x6ac
[ 56.861333][ C16] ? rest_init+0x188/0x188
[ 56.861369][ C16] kernel_init+0x11/0x138
[ 56.871333][ C16] ? rest_init+0x188/0x188
[ 56.871354][ C16] ret_from_fork+0x22/0x40
[ 64.601362][ C16] rcu: INFO: rcu_sched self-detected stall on CPU
[ 64.611335][ C16] rcu: 16-....: (5958 ticks this GP)
idle=37e/1/0x4000000000000002 softirq=27/27 fqs=3000
[ 64.621334][ C16] (t=6002 jiffies g=-1079 q=25)
[ 64.621334][ C16] NMI backtrace for cpu 16
[ 64.621374][ C16] CPU: 16 PID: 1 Comm: swapper/0 Tainted:
G L 5.2.0-rc5-next-20190621+ #1
[ 64.631372][ C16] Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385
Gen10, BIOS A40 03/09/2018
[ 64.641371][ C16] Call Trace:
[ 64.651337][ C16] <IRQ>
[ 64.651376][ C16] dump_stack+0x62/0x9a
[ 64.651376][ C16] nmi_cpu_backtrace.cold.0+0x2e/0x33
[ 64.661337][ C16] ? nmi_cpu_backtrace_handler+0x20/0x20
[ 64.661337][ C16] nmi_trigger_cpumask_backtrace+0x1a6/0x1b9
[ 64.671353][ C16] arch_trigger_cpumask_backtrace+0x19/0x20
[ 64.681366][ C16] rcu_dump_cpu_stacks+0x18b/0x1d6
[ 64.681366][ C16] rcu_sched_clock_irq.cold.64+0x368/0x791
[ 64.691336][ C16] ? kasan_check_read+0x11/0x20
[ 64.691354][ C16] ? __raise_softirq_irqoff+0x66/0x150
[ 64.701336][ C16] update_process_times+0x2f/0x60
[ 64.701362][ C16] tick_periodic+0x38/0xe0
[ 64.711334][ C16] tick_handle_periodic+0x2e/0x80
[ 64.711353][ C16] smp_apic_timer_interrupt+0xfb/0x370
[ 64.721367][ C16] apic_timer_interrupt+0xf/0x20
[ 64.721367][ C16] </IRQ>
[ 64.721367][ C16] RIP: 0010:_raw_spin_unlock_irqrestore+0x2f/0x40
[ 64.731370][ C16] Code: 55 48 89 e5 41 54 49 89 f4 be 01 00 00 00 53
