The intel-int3496.txt file is a documentation for an ACPI driver.
There's no reason to keep it on a separate directory.
So, instead of keeping it on some random location, move it
to a sub-directory inside the ACPI documentation dir.
For now, keep it with .txt extension, in order to avoid
Sphinx build noise. A later patch should change it to .rst
and movin it to be together with other acpi docs.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
---
.../acpi/extcon-intel-int3496.rst} | 14 ++++++++++----
Documentation/firmware-guide/acpi/index.rst | 1 +
MAINTAINERS | 6 +++---
3 files changed, 14 insertions(+), 7 deletions(-)
rename Documentation/{extcon/intel-int3496.txt => firmware-guide/acpi/extcon-intel-int3496.rst} (66%)
diff --git a/Documentation/extcon/intel-int3496.txt b/Documentation/firmware-guide/acpi/extcon-intel-int3496.rst
similarity index 66%
rename from Documentation/extcon/intel-int3496.txt
rename to Documentation/firmware-guide/acpi/extcon-intel-int3496.rst
index 8155dbc7fad3..5137ca834b54 100644
--- a/Documentation/extcon/intel-int3496.txt
+++ b/Documentation/firmware-guide/acpi/extcon-intel-int3496.rst
@@ -1,5 +1,6 @@
+=====================================================
Intel INT3496 ACPI device extcon driver documentation
------------------------------------------------------
+=====================================================
The Intel INT3496 ACPI device extcon driver is a driver for ACPI
devices with an acpi-id of INT3496, such as found for example on
@@ -13,15 +14,20 @@ between an USB host and an USB peripheral controller.
The ACPI devices exposes this functionality by returning an array with up
to 3 gpio descriptors from its ACPI _CRS (Current Resource Settings) call:
-Index 0: The input gpio for the id-pin, this is always present and valid
-Index 1: The output gpio for enabling Vbus output from the device to the otg
+======= =====================================================================
+Index 0 The input gpio for the id-pin, this is always present and valid
+Index 1 The output gpio for enabling Vbus output from the device to the otg
port, write 1 to enable the Vbus output (this gpio descriptor may
be absent or invalid)
-Index 2: The output gpio for muxing of the data pins between the USB host and
+Index 2 The output gpio for muxing of the data pins between the USB host and
the USB peripheral controller, write 1 to mux to the peripheral
controller
+======= =====================================================================
There is a mapping between indices and GPIO connection IDs as follows
+
+ ======= =======
id index 0
vbus index 1
mux index 2
+ ======= =======
diff --git a/Documentation/firmware-guide/acpi/index.rst b/Documentation/firmware-guide/acpi/index.rst
index ae609eec4679..90c90d42d9ad 100644
--- a/Documentation/firmware-guide/acpi/index.rst
+++ b/Documentation/firmware-guide/acpi/index.rst
@@ -24,3 +24,4 @@ ACPI Support
acpi-lid
lpit
video_extension
+ extcon-intel-int3496
diff --git a/MAINTAINERS b/MAINTAINERS
index e07cbd44d48a..b7c81bd0f8e8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -321,7 +321,7 @@ F: drivers/pnp/pnpacpi/
F: include/linux/acpi.h
F: include/linux/fwnode.h
F: include/acpi/
-F: Documentation/acpi/
+F: Documentation/firmware-guide/acpi/
F: Documentation/ABI/testing/sysfs-bus-acpi
F: Documentation/ABI/testing/configfs-acpi
F: drivers/pci/*acpi*
@@ -4881,7 +4881,7 @@ S: Maintained
F: Documentation/
F: scripts/kernel-doc
X: Documentation/ABI/
-X: Documentation/acpi/
+X: Documentation/firmware-guide/acpi/
X: Documentation/devicetree/
X: Documentation/i2c/
X: Documentation/media/
@@ -6057,7 +6057,7 @@ S: Maintained
F: drivers/extcon/
F: include/linux/extcon/
F: include/linux/extcon.h
-F: Documentation/extcon/
+F: Documentation/firmware-guide/acpi/extcon-intel-int3496.rst
F: Documentation/devicetree/bindings/extcon/
EXYNOS DP DRIVER
--
2.21.0
