Re: [PATCH] PCI: PM: Avoid possible suspend-to-idle issue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rafael,

at 19:02, Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> wrote:

On Friday, May 17, 2019 11:08:50 AM CEST Rafael J. Wysocki wrote:
From: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>

If a PCI driver leaves the device handled by it in D0 and calls
pci_save_state() on the device in its ->suspend() or ->suspend_late()
callback, it can expect the device to stay in D0 over the whole
s2idle cycle.  However, that may not be the case if there is a
spurious wakeup while the system is suspended, because in that case
pci_pm_suspend_noirq() will run again after pci_pm_resume_noirq()
which calls pci_restore_state(), via pci_pm_default_resume_early(),
so state_saved is cleared and the second iteration of
pci_pm_suspend_noirq() will invoke pci_prepare_to_sleep() which
may change the power state of the device.

To avoid that, add a new internal flag, skip_bus_pm, that will be set
by pci_pm_suspend_noirq() when it runs for the first time during the
given system suspend-resume cycle if the state of the device has
been saved already and the device is still in D0.  Setting that flag
will cause the next iterations of pci_pm_suspend_noirq() to set
state_saved for pci_pm_resume_noirq(), so that it always restores the
device state from the originally saved data, and avoid calling
pci_prepare_to_sleep() for the device.

Fixes: 33e4f80ee69b ("ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>

I just found out this patch has a chance to freeze or reboot the system during suspend cycles.
What information do you need to debug?

Kai-Heng

---
 drivers/pci/pci-driver.c |   17 ++++++++++++++++-
 include/linux/pci.h      |    1 +
 2 files changed, 17 insertions(+), 1 deletion(-)

Index: linux-pm/drivers/pci/pci-driver.c
===================================================================
--- linux-pm.orig/drivers/pci/pci-driver.c
+++ linux-pm/drivers/pci/pci-driver.c
@@ -734,6 +734,8 @@ static int pci_pm_suspend(struct device
 	struct pci_dev *pci_dev = to_pci_dev(dev);
 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;

+	pci_dev->skip_bus_pm = false;
+
 	if (pci_has_legacy_pm_support(pci_dev))
 		return pci_legacy_suspend(dev, PMSG_SUSPEND);

@@ -827,7 +829,20 @@ static int pci_pm_suspend_noirq(struct d
 		}
 	}

-	if (!pci_dev->state_saved) {
+	if (pci_dev->skip_bus_pm) {
+		/*
+		 * The function is running for the second time in a row without
+		 * going through full resume, which is possible only during
+		 * suspend-to-idle in a spurious wakeup case.  Moreover, the
+		 * device was originally left in D0, so its power state should
+		 * not be changed here and the device register values saved
+		 * originally should be restored on resume again.
+		 */
+		pci_dev->state_saved = true;
+	} else if (pci_dev->state_saved) {
+		if (pci_dev->current_state == PCI_D0)
+			pci_dev->skip_bus_pm = true;
+	} else {
 		pci_save_state(pci_dev);
 		if (pci_power_manageable(pci_dev))
 			pci_prepare_to_sleep(pci_dev);
Index: linux-pm/include/linux/pci.h
===================================================================
--- linux-pm.orig/include/linux/pci.h
+++ linux-pm/include/linux/pci.h
@@ -344,6 +344,7 @@ struct pci_dev {
 						   D3cold, not set for devices
 						   powered on/off by the
 						   corresponding bridge */
+	unsigned int	skip_bus_pm:1;	/* Internal: Skip bus-level PM */
 	unsigned int	ignore_hotplug:1;	/* Ignore hotplug events */
 	unsigned int	hotplug_user_indicators:1; /* SlotCtl indicators
 						      controlled exclusively by

Bjorn, I've assumed no concerns or objections from you regarding this one and
queued it up.

If that assumption is incorrect, please let me know.





[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux