Wire up the existing GPIO and interrupt controller drivers to the ACPI subsystem so they can be used on ACPI systems for ACPI event (power button, hardware error notification etc) Changes since v3: - export ACPI irq domain helper to modules - documents its parameters - tweak commit log of #1 - add acks to patches #1 , #3 and #4 Changes since v2: - use helper to create hierarchical IRQ domains under ACPI instead of exposing the GSI domain's irqdomain pointer directly (#1) - use has_acpi_companion() instead of ACPI_COMPANION() where possible (#4) - add Mika's ack to #4 Changes since v1: - Describe the EXIU controller as a separate device, which is a more accurate depiction of reality, and untangles the code a bit as well. Note that this requires the GPIO AML device to describe the EXIU interrupts explicitly. - Add a patch to obtain the ACPI GSI irqdomain. The EXIU driver needs this to obtain the default parent domain, since the GIC is not modeled as an ACPI object in the namespace, and so the parent<->child link cannot be expressed in AML. - Drop the Kconfig symbol for the GPIO controller. Just include the ACPI part when CONFIG_ACPI is defined. Cc: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx> Cc: Linus Walleij <linus.walleij@xxxxxxxxxx> Cc: Marc Zyngier <marc.zyngier@xxxxxxx> Cc: Graeme Gregory <graeme.gregory@xxxxxxxxxx> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx> Cc: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> Cc: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx> Cc: Len Brown <lenb@xxxxxxxxxx> Ard Biesheuvel (4): acpi/irq: implement helper to create hierachical domains irqchip/exiu: preparatory refactor for ACPI support irqchip/exiu: implement ACPI support gpio: mb86s7x: enable ACPI support drivers/acpi/irq.c | 26 ++++ drivers/gpio/gpio-mb86s7x.c | 51 ++++++- drivers/irqchip/irq-sni-exiu.c | 142 +++++++++++++++----- include/linux/acpi.h | 7 + 4 files changed, 188 insertions(+), 38 deletions(-) -- 2.20.1
