Re: [PATCH RFC v2 net-next 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, May 06, 2019 at 05:35:57PM -0700, Ruslan Babayev wrote:
> Lookup I2C adapter using the "i2c-bus" device property on ACPI based
> systems similar to how it's done with DT.
> 
> An example DSD describing an SFP on an ACPI based system:
> 
> Device (SFP0)
> {
>     Name (_HID, "PRP0001")
>     Name (_CRS, ResourceTemplate()
>     {
>         GpioIo(Exclusive, PullDefault, 0, 0, IoRestrictionNone,
>                "\\_SB.PCI0.RP01.GPIO", 0, ResourceConsumer)
>             { 0, 1, 2, 3, 4 }
>     })
>     Name (_DSD, Package ()
>     {
>         ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
>         Package () {
>             Package () { "compatible", "sff,sfp" },
>             Package () { "i2c-bus", \_SB.PCI0.RP01.I2C.MUX.CH0 },
>             Package () { "maximum-power-milliwatt", 1000 },
>             Package () { "tx-disable-gpios", Package () { ^SFP0, 0, 0, 1} },
>             Package () { "reset-gpio",       Package () { ^SFP0, 0, 1, 1} },
>             Package () { "mod-def0-gpios",   Package () { ^SFP0, 0, 2, 1} },
>             Package () { "tx-fault-gpios",   Package () { ^SFP0, 0, 3, 0} },
>             Package () { "los-gpios",        Package () { ^SFP0, 0, 4, 1} },
>         },

As i said before, i know ~0 about ACPI. Does devm_gpiod_get() just
work for ACPI?

Thanks
	Andrew



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux