Re: [PATCH net-next 2/2] net: phy: sfp: enable i2c-bus detection on ACPI based systems

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, May 06, 2019 at 07:59:51AM +0300, Mika Westerberg wrote:
> On Sun, May 05, 2019 at 03:05:23PM -0700, Ruslan Babayev wrote:
> > Lookup I2C adapter using the "i2c-bus" device property on ACPI based
> > systems similar to how it's done with DT.
> > 
> > An example DSD describing an SFP on an ACPI based system:
> > 
> > Device (SFP0)
> > {
> >     Name (_HID, "PRP0001")
> >     Name (_DSD, Package ()
> >     {
> >         ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
> >         Package () {
> >             Package () { "compatible", "sff,sfp" },
> >             Package () { "i2c-bus", \_SB.PCI0.RP01.I2C.MUX.CH0 },
> 
> Hmm, ACPI has I2cSerialBusV2() resource for this purpose. Why you are not
> using that?

Hi Mika

Does that reference the bus as a whole, or a device on the bus?

The SFP subsystem needs a reference to the bus as a whole. There can
be an at24 like EEPROM at addresses 0x50 and 0x51. There can be an
MDIO bus encapsulated in i2c at addresses 0x40-0x5f, excluding 0x50
and 0x51. What actually is there depends on the SFP module which is
plugged into the SFP cage, and it is all hot-plugable.

	Andrew



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux