[PATCH v3 11/13] platform/x86: intel_cht_int33fe: Provide fwnode for the USB connector

[Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>]

In ACPI, and now also in DT, the USB connectors usually have
their own device nodes. In case of USB Type-C, those
connector (port) nodes are child nodes of the controller or
PHY device, in our case the fusb302. The software fwnodes
allow us to create a similar child node for fusb302 that
represents the connector also on Intel CHT.

This makes it possible replace the fusb302 specific device
properties which were deprecated with the common USB
connector properties that tcpm.c is able to use directly.

Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
---
 drivers/platform/x86/intel_cht_int33fe.c | 37 ++++++++++++++++++++++--
 1 file changed, 34 insertions(+), 3 deletions(-)

diff --git a/drivers/platform/x86/intel_cht_int33fe.c b/drivers/platform/x86/intel_cht_int33fe.c
index 863a792d9282..eff5990322ff 100644
--- a/drivers/platform/x86/intel_cht_int33fe.c
+++ b/drivers/platform/x86/intel_cht_int33fe.c
@@ -24,6 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
+#include <linux/usb/pd.h>
 
 #define EXPECTED_PTYPE		4
 
@@ -31,6 +32,7 @@ enum {
 	INT33FE_NODE_FUSB302,
 	INT33FE_NODE_MAX17047,
 	INT33FE_NODE_PI3USB30532,
+	INT33FE_NODE_USB_CONNECTOR,
 	INT33FE_NODE_MAX,
 };
 
@@ -111,9 +113,29 @@ cht_int33fe_register_max17047(struct device *dev, struct cht_int33fe_data *data)
 
 static const struct property_entry fusb302_props[] = {
 	PROPERTY_ENTRY_STRING("linux,extcon-name", "cht_wcove_pwrsrc"),
-	PROPERTY_ENTRY_U32("fcs,max-sink-microvolt", 12000000),
-	PROPERTY_ENTRY_U32("fcs,max-sink-microamp",   3000000),
-	PROPERTY_ENTRY_U32("fcs,max-sink-microwatt", 36000000),
+	{ }
+};
+
+#define PDO_FIXED_FLAGS \
+	(PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM)
+
+static const u32 src_pdo[] = {
+	PDO_FIXED(5000, 1500, PDO_FIXED_FLAGS),
+};
+
+static const u32 snk_pdo[] = {
+	PDO_FIXED(5000, 400, PDO_FIXED_FLAGS),
+	PDO_VAR(5000, 12000, 3000),
+};
+
+static const struct property_entry usb_connector_props[] = {
+	PROPERTY_ENTRY_STRING("name", "connector"),
+	PROPERTY_ENTRY_STRING("data-role", "dual"),
+	PROPERTY_ENTRY_STRING("power-role", "dual"),
+	PROPERTY_ENTRY_STRING("try-power-role", "sink"),
+	PROPERTY_ENTRY_U32_ARRAY("source-pdos", src_pdo),
+	PROPERTY_ENTRY_U32_ARRAY("sink-pdos", snk_pdo),
+	PROPERTY_ENTRY_U32("op-sink-microwatt", 36000000),
 	{ }
 };
 
@@ -148,6 +170,15 @@ static int cht_int33fe_add_nodes(struct cht_int33fe_data *data)
 		data->node[i] = fwnode;
 	}
 
+	/* Node for the USB connector (FUSB302 is the parent) */
+	fwnode = fwnode_create_software_node(usb_connector_props,
+					     data->node[INT33FE_NODE_FUSB302]);
+	if (IS_ERR(fwnode)) {
+		ret = PTR_ERR(fwnode);
+		goto err_remove_nodes;
+	}
+	data->node[INT33FE_NODE_USB_CONNECTOR] = fwnode;
+
 	return 0;
 
 err_remove_nodes:
-- 
2.20.1