Re: [PATCHv5 03/10] acpi/hmat: Parse and report heterogeneous memory

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 24 Jan 2019 16:07:17 -0700
Keith Busch <keith.busch@xxxxxxxxx> wrote:

> Systems may provide different memory types and export this information
> in the ACPI Heterogeneous Memory Attribute Table (HMAT). Parse these
> tables provided by the platform and report the memory access and caching
> attributes to the kernel messages.
> 
> Signed-off-by: Keith Busch <keith.busch@xxxxxxxxx>
Minor comments inline.

One question for reviewers in general. Should this be a lot 'louder' on
failures.

I'd really like the kernel to moan a lot on all occasions if we start getting
bad HMAT tables out there.  This feels to me too silent by default!

Jonathan
> ---
>  drivers/acpi/Kconfig       |   1 +
>  drivers/acpi/Makefile      |   1 +
>  drivers/acpi/hmat/Kconfig  |   8 ++
>  drivers/acpi/hmat/Makefile |   1 +
>  drivers/acpi/hmat/hmat.c   | 181 +++++++++++++++++++++++++++++++++++++++++++++
>  5 files changed, 192 insertions(+)
>  create mode 100644 drivers/acpi/hmat/Kconfig
>  create mode 100644 drivers/acpi/hmat/Makefile
>  create mode 100644 drivers/acpi/hmat/hmat.c
> 
> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
> index 90ff0a47c12e..b377f970adfd 100644
> --- a/drivers/acpi/Kconfig
> +++ b/drivers/acpi/Kconfig
> @@ -465,6 +465,7 @@ config ACPI_REDUCED_HARDWARE_ONLY
>  	  If you are unsure what to do, do not enable this option.
>  
>  source "drivers/acpi/nfit/Kconfig"
> +source "drivers/acpi/hmat/Kconfig"
>  
>  source "drivers/acpi/apei/Kconfig"
>  source "drivers/acpi/dptf/Kconfig"
> diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
> index bb857421c2e8..5d361e4e3405 100644
> --- a/drivers/acpi/Makefile
> +++ b/drivers/acpi/Makefile
> @@ -80,6 +80,7 @@ obj-$(CONFIG_ACPI_PROCESSOR)	+= processor.o
>  obj-$(CONFIG_ACPI)		+= container.o
>  obj-$(CONFIG_ACPI_THERMAL)	+= thermal.o
>  obj-$(CONFIG_ACPI_NFIT)		+= nfit/
> +obj-$(CONFIG_ACPI_HMAT)		+= hmat/
>  obj-$(CONFIG_ACPI)		+= acpi_memhotplug.o
>  obj-$(CONFIG_ACPI_HOTPLUG_IOAPIC) += ioapic.o
>  obj-$(CONFIG_ACPI_BATTERY)	+= battery.o
> diff --git a/drivers/acpi/hmat/Kconfig b/drivers/acpi/hmat/Kconfig
> new file mode 100644
> index 000000000000..c9637e2e7514
> --- /dev/null
> +++ b/drivers/acpi/hmat/Kconfig
> @@ -0,0 +1,8 @@
> +# SPDX-License-Identifier: GPL-2.0
> +config ACPI_HMAT
> +	bool "ACPI Heterogeneous Memory Attribute Table Support"
> +	depends on ACPI_NUMA
> +	help
> +	 If set, this option causes the kernel to set the memory NUMA node
> +	 relationships and access attributes in accordance with ACPI HMAT
> +	 (Heterogeneous Memory Attributes Table).
> diff --git a/drivers/acpi/hmat/Makefile b/drivers/acpi/hmat/Makefile
> new file mode 100644
> index 000000000000..e909051d3d00
> --- /dev/null
> +++ b/drivers/acpi/hmat/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_ACPI_HMAT) := hmat.o
> diff --git a/drivers/acpi/hmat/hmat.c b/drivers/acpi/hmat/hmat.c
> new file mode 100644
> index 000000000000..1741bf30d87f
> --- /dev/null
> +++ b/drivers/acpi/hmat/hmat.c
> @@ -0,0 +1,181 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2019, Intel Corporation.
> + *
> + * Heterogeneous Memory Attributes Table (HMAT) representation
> + *
> + * This program parses and reports the platform's HMAT tables, and registers
> + * the applicable attributes with the node's interfaces.
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/bitops.h>
> +#include <linux/device.h>
> +#include <linux/init.h>
> +#include <linux/list.h>
> +#include <linux/node.h>
> +#include <linux/sysfs.h>
> +
> +static __init const char *hmat_data_type(u8 type)
> +{
> +	switch (type) {
> +	case ACPI_HMAT_ACCESS_LATENCY:
> +		return "Access Latency";
> +	case ACPI_HMAT_READ_LATENCY:
> +		return "Read Latency";
> +	case ACPI_HMAT_WRITE_LATENCY:
> +		return "Write Latency";
> +	case ACPI_HMAT_ACCESS_BANDWIDTH:
> +		return "Access Bandwidth";
> +	case ACPI_HMAT_READ_BANDWIDTH:
> +		return "Read Bandwidth";
> +	case ACPI_HMAT_WRITE_BANDWIDTH:
> +		return "Write Bandwidth";
> +	default:
> +		return "Reserved";
> +	};
> +}
> +
> +static __init const char *hmat_data_type_suffix(u8 type)
> +{
> +	switch (type) {
> +	case ACPI_HMAT_ACCESS_LATENCY:
> +	case ACPI_HMAT_READ_LATENCY:
> +	case ACPI_HMAT_WRITE_LATENCY:
> +		return " nsec";
> +	case ACPI_HMAT_ACCESS_BANDWIDTH:
> +	case ACPI_HMAT_READ_BANDWIDTH:
> +	case ACPI_HMAT_WRITE_BANDWIDTH:
> +		return " MB/s";
> +	default:
> +		return "";
> +	};
> +}
> +
> +static __init int hmat_parse_locality(union acpi_subtable_headers *header,
> +				      const unsigned long end)
> +{
> +	struct acpi_hmat_locality *hmat_loc = (void *)header;
> +	unsigned int init, targ, total_size, ipds, tpds;
> +	u32 *inits, *targs, value;
> +	u16 *entries;
> +	u8 type;
> +
> +	if (hmat_loc->header.length < sizeof(*hmat_loc)) {
> +		pr_debug("HMAT: Unexpected locality header length: %d\n",
> +			 hmat_loc->header.length);
> +		return -EINVAL;
> +	}
> +
> +	type = hmat_loc->data_type;
> +	ipds = hmat_loc->number_of_initiator_Pds;
> +	tpds = hmat_loc->number_of_target_Pds;
> +	total_size = sizeof(*hmat_loc) + sizeof(*entries) * ipds * tpds +
> +		     sizeof(*inits) * ipds + sizeof(*targs) * tpds;
> +	if (hmat_loc->header.length < total_size) {
> +		pr_debug("HMAT: Unexpected locality header length:%d, minimum required:%d\n",
> +			 hmat_loc->header.length, total_size);
> +		return -EINVAL;
> +	}
> +
> +	pr_info("HMAT: Locality: Flags:%02x Type:%s Initiator Domains:%d Target Domains:%d Base:%lld\n",
> +		hmat_loc->flags, hmat_data_type(type), ipds, tpds,
> +		hmat_loc->entry_base_unit);
> +
> +	inits = (u32 *)(hmat_loc + 1);
> +	targs = &inits[ipds];
This line is a bit of an oddity as it's indexing off the end of the data.
	targs = inits + ipds;
would be nicer to my mind as doesn't even hint that we are in inits still.


> +	entries = (u16 *)(&targs[tpds]);

As above I'd prefer we did the pointer arithmetic explicitly rather
than used an index off the end of the array.

> +	for (init = 0; init < ipds; init++) {
> +		for (targ = 0; targ < tpds; targ++) {
> +			value = entries[init * tpds + targ];
> +			value = (value * hmat_loc->entry_base_unit) / 10;
> +			pr_info("  Initiator-Target[%d-%d]:%d%s\n",
> +				inits[init], targs[targ], value,
> +				hmat_data_type_suffix(type));

Worth checking at this early stage that the domains exist in SRAT?
+ screaming if they don't.
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static __init int hmat_parse_cache(union acpi_subtable_headers *header,
> +				   const unsigned long end)
> +{
> +	struct acpi_hmat_cache *cache = (void *)header;
> +	u32 attrs;
> +
> +	if (cache->header.length < sizeof(*cache)) {
> +		pr_debug("HMAT: Unexpected cache header length: %d\n",
> +			 cache->header.length);
> +		return -EINVAL;
> +	}
> +
> +	attrs = cache->cache_attributes;
> +	pr_info("HMAT: Cache: Domain:%d Size:%llu Attrs:%08x SMBIOS Handles:%d\n",
> +		cache->memory_PD, cache->cache_size, attrs,
> +		cache->number_of_SMBIOShandles);

Can we sanity check those smbios handles actually match anything?

> +
> +	return 0;
> +}
> +
> +static int __init hmat_parse_address_range(union acpi_subtable_headers *header,
> +					   const unsigned long end)
> +{
> +	struct acpi_hmat_address_range *spa = (void *)header;
> +
> +	if (spa->header.length != sizeof(*spa)) {
> +		pr_debug("HMAT: Unexpected address range header length: %d\n",
> +			 spa->header.length);

My gut feeling is that it's much more useful to make this always print rather
than debug.  Same with other error paths above.  Given the number of times
broken ACPI tables show up, it's nice to complain really loudly!

Perhaps others prefer to not do so though so I'll defer to subsystem norms.

> +		return -EINVAL;
> +	}
> +	pr_info("HMAT: Memory (%#llx length %#llx) Flags:%04x Processor Domain:%d Memory Domain:%d\n",
> +		spa->physical_address_base, spa->physical_address_length,
> +		spa->flags, spa->processor_PD, spa->memory_PD);
> +
> +	return 0;
> +}
> +
> +static int __init hmat_parse_subtable(union acpi_subtable_headers *header,
> +				      const unsigned long end)
> +{
> +	struct acpi_hmat_structure *hdr = (void *)header;
> +
> +	if (!hdr)
> +		return -EINVAL;
> +
> +	switch (hdr->type) {
> +	case ACPI_HMAT_TYPE_ADDRESS_RANGE:
> +		return hmat_parse_address_range(header, end);
> +	case ACPI_HMAT_TYPE_LOCALITY:
> +		return hmat_parse_locality(header, end);
> +	case ACPI_HMAT_TYPE_CACHE:
> +		return hmat_parse_cache(header, end);
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static __init int hmat_init(void)
> +{
> +	struct acpi_table_header *tbl;
> +	enum acpi_hmat_type i;
> +	acpi_status status;
> +
> +	if (srat_disabled())
> +		return 0;
> +
> +	status = acpi_get_table(ACPI_SIG_HMAT, 0, &tbl);
> +	if (ACPI_FAILURE(status))
> +		return 0;
> +
> +	for (i = ACPI_HMAT_TYPE_ADDRESS_RANGE; i < ACPI_HMAT_TYPE_RESERVED; i++) {
> +		if (acpi_table_parse_entries(ACPI_SIG_HMAT,
> +					     sizeof(struct acpi_table_hmat), i,
> +					     hmat_parse_subtable, 0) < 0)
> +			goto out_put;
> +	}
> +out_put:
> +	acpi_put_table(tbl);
> +	return 0;
> +}
> +subsys_initcall(hmat_init);





[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux