This adds a driver for the SMMUv3 PMU into the perf framework. It includes an IORT update to support PM Counter Groups. This is based on the initial work done by Neil Leeder[1] SMMUv3 PMCG devices are named as smmuv3_pmcg_<phys_addr_page> where <phys_addr_page> is the physical page address of the SMMU PMCG. For example, the PMCG at 0xff88840000 is named smmuv3_pmcg_ff88840 Usage example: For common arch supported events: perf stat -e smmuv3_pmcg_ff88840/transaction,filter_enable=1, filter_span=1,filter_stream_id=0x42/ -a netperf For IMP DEF events: perf stat -e smmuv3_pmcg_ff88840/event=id/ -a netperf This is sanity tested on a HiSilicon platform that requires a quirk to run it properly. As per HiSilicon erratum #162001800, PMCG event counter registers (SMMU_PMCG_EVCNTRn) on HiSilicon Hip08 platforms are read only and this prevents the software from setting the initial period on event start. Unfortunately we were a bit late in the cycle to detect this issue and now require software workaround for this. Patch #4 is added to this series to provide a workaround for this issue. Further testing on supported platforms are very much welcome. v5 ---> v6 -Addressed comments from Robin and Andrew. -Changed the way global filter settings are applied as a probable fix to the v5 bug where in-use settings gets overwritten. -Use of PMCG model number to identify the platform. -Added R-by from Robin to patches #1 and #3. v4 ---> v5 -IORT code is modified to pass the option/quirk flags to the driver through platform_data (patch #4), based on Robin's comments. -Removed COMPILE_TEST (patch #2). v3 --> v4 -Addressed comments from Jean and Robin. -Merged dma config callbacks as per Lorenzo's comments(patch #1). -Added handling of Global(Counter0) filter settings mode(patch #2). -Added patch #4 to address HiSilicon erratum #162001800 - v2 --> v3 -Addressed comments from Robin. -Removed iort helper function to retrieve the PMCG reference smmu. -PMCG devices are now named using the base address v1 --> v2 - Addressed comments from Robin. - Added an helper to retrieve the associated smmu dev and named PMUs to make the association visible to user. - Added MSI support for overflow irq [1]https://www.spinics.net/lists/arm-kernel/msg598591.html Neil Leeder (2): acpi: arm64: add iort support for PMCG perf: add arm64 smmuv3 pmu driver Shameer Kolothum (2): perf/smmuv3: Add MSI irq support perf/smmuv3_pmu: Enable HiSilicon Erratum 162001800 quirk drivers/acpi/arm64/iort.c | 131 +++++-- drivers/perf/Kconfig | 9 + drivers/perf/Makefile | 1 + drivers/perf/arm_smmuv3_pmu.c | 873 ++++++++++++++++++++++++++++++++++++++++++ include/linux/acpi_iort.h | 7 + 5 files changed, 997 insertions(+), 24 deletions(-) create mode 100644 drivers/perf/arm_smmuv3_pmu.c -- 2.7.4
