Hi,
On 07-01-19 16:46, Andy Shevchenko wrote:
On Mon, Jan 07, 2019 at 12:15:55PM +0100, Hans de Goede wrote:
Most PMIC-s use only a single i2c-address, so after verifying the
i2c-address matches, we can simply pass the call to regmap_update_bits.
This commit adds support for this and hooks this up for the xpower AXP288
PMIC by setting the new pmic_i2c_address field.
This fixes the following errors on display on / off on a Jumper Ezpad
mini 3 and an Onda V80 plus tablet, both of which use the AXP288:
intel_soc_pmic_exec_mipi_pmic_seq_element: Not implemented
intel_soc_pmic_exec_mipi_pmic_seq_element: i2c-addr: 0x34 reg-addr ...
[drm:mipi_exec_pmic [i915]] *ERROR* mipi_exec_pmic failed, error: -95
Instead of these errors on both devices we now correctly turn on / off
DLDO3 (through direct register manipulation). On the Onda V80 plus this
fixes an issue with the backlight being brighter around the borders after
an off / on cycle. This should also help to save some power when the
display is off.
+ } else if (d->pmic_i2c_address) {
+ if (i2c_address == d->pmic_i2c_address) {
+ ret = regmap_update_bits(intel_pmic_opregion->regmap,
+ reg_address, mask, value);
+ } else {
+ pr_err("%s: Unexpected i2c-addr: 0x%02x (reg-addr 0x%x value 0x%x mask 0x%x)\n",
+ __func__, i2c_address, reg_address, value, mask);
+ ret = -ENXIO;
+ }
--- a/drivers/acpi/pmic/intel_pmic_xpower.c
+++ b/drivers/acpi/pmic/intel_pmic_xpower.c
+ .pmic_i2c_address = 0x34,
Can we just have a hook here instead of exposing PMIC I2C address?
Am I missing something in case it's not possible?
We already have a hook, but it isn't really necessary to implement
that for each model PMIC. The MFD device which is the PMIC's parent
in most cases will give us a regmap to access the PMIC registers and
that allows us to do a generic implementation.
But the MIPI PMIC sequence includes an i2c-address as some PMICs
span multiple i2c-addresses. For the simple single i2c-address case
the regmap gives us access to the registers behind that single address
and we can use a generic solution. In this case we should verify the
i2c-addr is what we expect, which is where the pmic_i2c_address comes in.
Regards,
Hans
