Re: [PATCH v1 1/4] dt-bindings: sc16is7xx: Add alternative clock-frequence property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



(Cc: Rafael and linux-acpi. Rafael, a short context for you, there is a device
 connected externally to the IoT ACPI-enabled x86-board via I2C bus. The driver
 needs a clock frequency used inside that device to perform correctly, since
 ACPI has not yet concept of clock provider I proposed to add a property widely
 used for other IPs in a similar way, but DT people strongly reject my
 approach. If you may have a chance to look and maybe suggest the approach
 which satisfies both sides, it would be really nice!)

On Fri, Dec 07, 2018 at 06:05:14PM +0200, Vladimir Zapolskiy wrote:
> On 12/07/2018 03:48 PM, Andy Shevchenko wrote:
> > On Fri, Dec 07, 2018 at 10:18:26AM +0200, Vladimir Zapolskiy wrote:
> >> On 12/05/2018 04:11 PM, Andy Shevchenko wrote:
> >>> For the platforms which have no clock provider for the sc16is7xx type of UART,
> >>> introduce an alternative clock-frequency property which would be used instead.
> >>
> >> the subject has a typo in 'clock-frequence', then can you please tell me more,
> >> how is it possible that an SC16IS7xx IC has no clock provider connected to it?
> > 
> > I better ask Grigorii about this, since I have no hardware at my possession.
> > 
> >> And if there is one, then please just describe it in device tree as well.
> > 
> > Tell me how to do this for ACPI?
> > 
> 
> I didn't grasp the connection between your update of IC device tree bindings
> and ACPI, please elaborate in the context of updating device tree bindings
> documentation and supported properties.

OK.

> I do care about purity of device tree bindings of SC16IS7xx IC, which is
> found on some of my boards with description in DTB, that's why I object to
> this series.

I also support the purity of many drivers and modules in the software (Linux
kernel), but because of existing hardware and customers I can't reject their
needs. That's why, unfortunately, the drivers' code is full of quirks.

If I would object on each of those cases, I would end up with the OS which
supports almost nothing.

> >>> +- clock-frequency: The source clock frequency for the IC.
> >>>  
> >>
> >> I strongly dislike this change, I'm inclined to cast a NAK to the series.
> > 
> > To be productive, please propose the alternative, otherwise your NAK is nothing
> > to do with a real hardware and approach I proposed.
> 
> As I've said 'clock-frequency' property is not a hardware property of SC16IS7xx
> IC, it is a hardware property of some external hardware component, it may
> provide a volatile clock rate, which you miss, and it should be described
> separately in DT.

I disagree with you.

Crystal or PLL or another clock source, even being external component, still is
internal to the blackbox called UART-I2C adapter.

> The current approach with 'clocks' property addresses all cases perfectly,
> even if your change is an attempt to solve some actual problem, you haven't
> managed to describe it in the commit message.

I will fix the commit message. I agree it's not perfect.

> NAK for the added property, which makes obtaining of the clock supplier
> frequency equivocal.

Your NAK is nothing w/o proposed alternative which would work in a case of ACPI
enabled platform.

> >> 1. 'clock-frequency' is a very specific device tree property, in my opinion
> >>     its presence is justified on sort of clock provider devices only (like I2C
> >>     controllers), unfortunately the property was added to a number of device
> >>     tree bindings improperly, mainly it was done before introduction of
> >>     "assigned-clocks" and "assigned-clock-parents" properties in CCF, and then
> >>     it was blindly copied.
> > 
> > OK, I will wait for your patch to remove such from, for example, 8250_dw.c
> > where same problem had been targeted in the same way.
> 
> I'm not interested to fix legacy device tree binding issues added in 2011,
> equally I'm not going to close my eyes on right the same issues, when someone
> attempts to spread them further today.

Any proposal, be constructive, please.

> >> 2. SC16IS7xx type of UARTs is a regular clock consumer, ICs always have a valid
> >>    clock provider connected to XTAL1 (and XTAL2 in case of a connected
> >>    crystal oscillator), thus, if needed, the driver can get input clock rate
> >>    by calling standard clk_get_rate(), so the presence of the required 'clocks'
> >>    property is sufficient.
> > 
> > So what?
> > There is a hardware, there is a clock provider hidden in it. How you would
> > describe it? Platform data? Why?
> > 
> 
> What do you mean by 'hardware'? PCB, SC16IS7xx IC or something else?
> 
> What do you mean by 'a clock provider hidden in it'?
> 
> Please find the hidden clock provided and describe it in a proper way, for DTS
> changes please reference to Documentation/devicetree/bindings/clock contents.

Again, try to think about the world not being just arm + dts.

> >> 3. In some very specific corner cases it might be needed to add another
> >>    "assigned-clocks" and "assigned-clock-parents" properties to a particular
> >>    device node on a particular board, but their explicit description in device
> >>    tree bindings is not needed.
> > 
> > Can DT people once in life think outside the box?!
> > 
> 
> The rhetorical question doesn't sound like a nice supporting argument of
> your change.
> 
> Please don't slip into arrogance, and please concentrate on technical aspects.

Please, read your sentence above and tell me what the alternative I have?

-- 
With Best Regards,
Andy Shevchenko





[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux