Hello, This series aims to wire-up arm64's fancy new software-NMI notifications for firmware-first RAS. These need to use the estatus-queue, which is also needed for notifications via emulated-SError. All of these things take the 'in_nmi()' path through ghes_copy_tofrom_phys(), and so will deadlock if they can interact, which they might. To that end, this series removes the in_nmi() stuff from ghes.c. Locks are pushed out to the notification helpers, and fixmap entries are passed in to the code that needs them. This means the estatus-queue users can interrupt each other however they like. While doing this there is a fair amount of cleanup, which is (now) at the beginning of the series. NMIlike notifications interrupting ghes_probe() can go wrong for three different reasons. CPER record blocks greater than PAGE_SIZE dont' work. The estatus-pool allocation is simplified and the silent-flag/oops-begin is removed. Nothing in this series is intended as fixes, as its all cleanup or never-worked. ----------%<---------- The earlier boiler-plate: What's SDEI? Its ARM's "Software Delegated Exception Interface" [0]. It's used by firmware to tell the OS about firmware-first RAS events. These Software exceptions can interrupt anything, so I describe them as NMI-like. They aren't the only NMI-like way to notify the OS about firmware-first RAS events, the ACPI spec also defines 'NOTFIY_SEA' and 'NOTIFY_SEI'. (Acronyms: SEA, Synchronous External Abort. The CPU requested some memory, but the owner of that memory said no. These are always synchronous with the instruction that caused them. SEI, System-Error Interrupt, commonly called SError. This is an asynchronous external abort, the memory-owner didn't say no at the right point. Collectively these things are called external-aborts How is firmware involved? It traps these and re-injects them into the kernel once its written the CPER records). APEI's GHES code only expects one source of NMI. If a platform implements more than one of these mechanisms, APEI needs to handle the interaction. 'SEA' and 'SEI' can interact as 'SEI' is asynchronous. SDEI can interact with itself: its exceptions can be 'normal' or 'critical', and firmware could use both types for RAS. (errors using normal, 'panic-now' using critical). ----------%<---------- Known issue: * ghes_copy_tofrom_phys() already takes a lock in NMI context, this series moves that around, and makes sure we never try to take the same lock from different NMIlike notifications. Since the switch to queued spinlocks it looks like the kernel can only be 4 context's deep in spinlock, which arm64 could exceed as it doesn't have a single architected NMI. It either needs an additional idx-bit in the qspinlock, or for ghes.c to switch to using a different type of lock for NMIlike notifications. Changes since v6: * Changed the order of the series. * Made hest.c own the estatus pool, which is now vmalloc()d. * Culled #ifdef, hopefully without generating too much noise. * Added GHESv2 'ack' support to NMI-like notifications * Use task-work to kick the memory_failure_queue() Specific changes are noted in each patch. [v6] https://www.spinics.net/lists/linux-acpi/msg84228.html [v5] https://www.spinics.net/lists/linux-acpi/msg82993.html [v4] https://www.spinics.net/lists/arm-kernel/msg653078.html [v3] https://www.spinics.net/lists/arm-kernel/msg649230.html [0] https://static.docs.arm.com/den0054/a/ARM_DEN0054A_Software_Delegated_Exception_Interface.pdf Feedback welcome, Thanks James Morse (25): ACPI / APEI: Don't wait to serialise with oops messages when panic()ing ACPI / APEI: Remove silent flag from ghes_read_estatus() ACPI / APEI: Switch estatus pool to use vmalloc memory ACPI / APEI: Make hest.c manage the estatus memory pool ACPI / APEI: Make estatus pool allocation a static size ACPI / APEI: Don't store CPER records physical address in struct ghes ACPI / APEI: Remove spurious GHES_TO_CLEAR check ACPI / APEI: Don't update struct ghes' flags in read/clear estatus ACPI / APEI: Generalise the estatus queue's notify code ACPI / APEI: Tell firmware the estatus queue consumed the records ACPI / APEI: Move NOTIFY_SEA between the estatus-queue and NOTIFY_NMI ACPI / APEI: Switch NOTIFY_SEA to use the estatus queue KVM: arm/arm64: Add kvm_ras.h to collect kvm specific RAS plumbing arm64: KVM/mm: Move SEA handling behind a single 'claim' interface ACPI / APEI: Move locking to the notification helper ACPI / APEI: Let the notification helper specify the fixmap slot ACPI / APEI: Pass ghes and estatus separately to avoid a later copy ACPI / APEI: Split ghes_read_estatus() to allow a peek at the CPER length ACPI / APEI: Only use queued estatus entry during _in_nmi_notify_one() ACPI / APEI: Use separate fixmap pages for arm64 NMI-like notifications mm/memory-failure: Add memory_failure_queue_kick() ACPI / APEI: Kick the memory_failure() queue for synchronous errors arm64: acpi: Make apei_claim_sea() synchronise with APEI's irq work firmware: arm_sdei: Add ACPI GHES registration helper ACPI / APEI: Add support for the SDEI GHES Notification type arch/arm/include/asm/kvm_ras.h | 14 + arch/arm/include/asm/system_misc.h | 5 - arch/arm64/include/asm/acpi.h | 4 +- arch/arm64/include/asm/daifflags.h | 1 + arch/arm64/include/asm/fixmap.h | 6 +- arch/arm64/include/asm/kvm_ras.h | 25 + arch/arm64/include/asm/system_misc.h | 2 - arch/arm64/kernel/acpi.c | 51 +++ arch/arm64/mm/fault.c | 25 +- drivers/acpi/apei/Kconfig | 12 +- drivers/acpi/apei/ghes.c | 652 ++++++++++++++++----------- drivers/acpi/apei/hest.c | 5 + drivers/firmware/arm_sdei.c | 70 +++ include/acpi/ghes.h | 4 +- include/linux/arm_sdei.h | 9 + include/linux/mm.h | 1 + mm/memory-failure.c | 15 +- virt/kvm/arm/mmu.c | 4 +- 18 files changed, 606 insertions(+), 299 deletions(-) create mode 100644 arch/arm/include/asm/kvm_ras.h create mode 100644 arch/arm64/include/asm/kvm_ras.h -- 2.19.2