Hi All,
On some Cherry Trail systems the GPU ACPI fwnode has power-resources which
point to the PMIC, which is connected over the LPSS I2C7 controller.
Currently the I2C controller resumes after the GPU is resumed leading to
the following errors:
i2c_designware 808622C1:06: controller timed out
ACPI Error: AE_ERROR, Returned by Handler for [UserDefinedRegion]
ACPI Error: Method parse/execution failed \_SB.P18W._ON, AE_ERROR
video LNXVIDEO:00: Failed to change power state to D0
This series fixes this. This actually requires 3 separate fixes each of
which is necessary and the error only goes away once all 3 are in place:
1) Patches 1-4 rework the acpi_lpss.c device-link code added by commit
e6ce0ce34f65 ("CPI / LPSS: Add device link for CHT SD card dependency on I2")
so that the code can be used to add a device link between an ACPI LPSS
device and a PCI device (the GPU).
Patch 5 then actually adds the device-link. Note that the other 2 fixes
may give the impression that this fix is not necessary, that is not the
case we most both make sure that the resume happens during the right
resume phase *and* that within that phase it is done before the GPU resume
2) The GPU is a PCI device and PCI devices are brought up (moved from D3 to D0)
in the noirq phase already. Normally ACPI LPSS device gets resumed in the
resume_early phase. The ordering from 1) only orders things within the same
phase. To make sure the I2C controller is ready before the GPU resumes
we must resume LPSS I2C controllers (on BYT and CHT) from the noirq phase.
This is done in patch 6.
3) Now we get a timeout waiting for the IRQ in the i2c-designware driver
since IRQs are disabled in the noirq resume phase. Patch 7 marks the IRQ
for BYT/CHT ACPI-LPSS i2c-designware controllers with IRQF_NO_SUSPEND.
These patches are posted a single series since together they fix a single
problem. But both the acpi_lpss and i2c-designware code have seen some
churn in -next and not having patch 7 in place results in the error staying
the same, so patches 1-6 can be merged indepedently without causing any
regresssions (and patch 7 without 1-6 is not an issue either).
Therefor I suggest that the acpi_lpss.c and the i2c-designware changes get
merged through separate trees.
Regards,
Hans
