Commit a3d411fb38c0 ("i2c: designware: Disable pm for PMIC i2c-bus even if
there is no _SEM method"), always set the pm_disabled flag on the I2C7
controller, even if its bus was not shared with the PUNIT.
This was a workaround for various suspend/resume issues, after the
following 2 commits this workaround is no longer necessary:
Commit 541527728341 ("PM: i2c-designware-platdrv: Suspend/resume at the
late/early stages")
Commit e6ce0ce34f65 ("ACPI / LPSS: Add device link for CHT SD card
dependency on I2C")
Therefor this commit removes this workaround.
After this commit the pm_disabled flag is only used to indicate that the
bus is shared with the PUNIT and after other recent changes we no longer
call dev_pm_syscore_device(dev, true), so we are no longer actually
disabling (non-runtime) pm, so this commit also renames the flag to
shared_with_punit to better reflect what it is for.
Since we now no longer keep the I2C controller alive during suspend, we
also no longer need to set IRQF_NO_SUSPEND.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/i2c/busses/i2c-designware-baytrail.c | 2 +-
drivers/i2c/busses/i2c-designware-core.h | 4 ++--
drivers/i2c/busses/i2c-designware-master.c | 10 ++-------
drivers/i2c/busses/i2c-designware-platdrv.c | 23 ++++----------------
4 files changed, 9 insertions(+), 30 deletions(-)
diff --git a/drivers/i2c/busses/i2c-designware-baytrail.c b/drivers/i2c/busses/i2c-designware-baytrail.c
index dbda8c9c8a1c..812438cce341 100644
--- a/drivers/i2c/busses/i2c-designware-baytrail.c
+++ b/drivers/i2c/busses/i2c-designware-baytrail.c
@@ -172,7 +172,7 @@ int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)
dev_info(dev->dev, "I2C bus managed by PUNIT\n");
dev->acquire_lock = baytrail_i2c_acquire;
dev->release_lock = baytrail_i2c_release;
- dev->pm_disabled = true;
+ dev->shared_with_punit = true;
pm_qos_add_request(&dev->pm_qos, PM_QOS_CPU_DMA_LATENCY,
PM_QOS_DEFAULT_VALUE);
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index d690e648bc01..f90de032e8ec 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -224,7 +224,7 @@
* @pm_qos: pm_qos_request used while holding a hardware lock on the bus
* @acquire_lock: function to acquire a hardware lock on the bus
* @release_lock: function to release a hardware lock on the bus
- * @pm_disabled: true if power-management should be disabled for this i2c-bus
+ * @shared_with_punit: true if this bus is shared with the SoCs PUNIT
* @disable: function to disable the controller
* @disable_int: function to disable all interrupts
* @init: function to initialize the I2C hardware
@@ -279,7 +279,7 @@ struct dw_i2c_dev {
struct pm_qos_request pm_qos;
int (*acquire_lock)(struct dw_i2c_dev *dev);
void (*release_lock)(struct dw_i2c_dev *dev);
- bool pm_disabled;
+ bool shared_with_punit;
void (*disable)(struct dw_i2c_dev *dev);
void (*disable_int)(struct dw_i2c_dev *dev);
int (*init)(struct dw_i2c_dev *dev);
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index 54b2a3a86677..d563a2c2ec97 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -672,7 +672,6 @@ static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev)
int i2c_dw_probe(struct dw_i2c_dev *dev)
{
struct i2c_adapter *adap = &dev->adapter;
- unsigned long irq_flags;
int ret;
init_completion(&dev->cmd_complete);
@@ -692,14 +691,9 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
adap->dev.parent = dev->dev;
i2c_set_adapdata(adap, dev);
- if (dev->pm_disabled) {
- irq_flags = IRQF_NO_SUSPEND;
- } else {
- irq_flags = IRQF_SHARED | IRQF_COND_SUSPEND;
- }
-
i2c_dw_disable_int(dev);
- ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, irq_flags,
+ ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr,
+ IRQF_SHARED | IRQF_COND_SUSPEND,
dev_name(dev->dev), dev);
if (ret) {
dev_err(dev->dev, "failure requesting irq %i: %d\n",
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index d281d21cdd8e..fcb07be8f684 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -97,10 +97,7 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev)
{
struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
u32 ss_ht = 0, fp_ht = 0, hs_ht = 0, fs_ht = 0;
- acpi_handle handle = ACPI_HANDLE(&pdev->dev);
const struct acpi_device_id *id;
- struct acpi_device *adev;
- const char *uid;
dev->adapter.nr = -1;
dev->tx_fifo_depth = 32;
@@ -135,18 +132,6 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev)
if (id && id->driver_data)
dev->flags |= (u32)id->driver_data;
- if (acpi_bus_get_device(handle, &adev))
- return -ENODEV;
-
- /*
- * Cherrytrail I2C7 gets used for the PMIC which gets accessed
- * through ACPI opregions during late suspend / early resume
- * disable pm for it.
- */
- uid = adev->pnp.unique_id;
- if ((dev->flags & MODEL_CHERRYTRAIL) && !strcmp(uid, "7"))
- dev->pm_disabled = true;
-
return 0;
}
@@ -231,7 +216,7 @@ static void dw_i2c_plat_pm_cleanup(struct dw_i2c_dev *dev)
{
pm_runtime_disable(dev->dev);
- if (dev->pm_disabled)
+ if (dev->shared_with_punit)
pm_runtime_put_noidle(dev->dev);
}
@@ -362,7 +347,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_active(&pdev->dev);
- if (dev->pm_disabled)
+ if (dev->shared_with_punit)
pm_runtime_get_noresume(&pdev->dev);
pm_runtime_enable(&pdev->dev);
@@ -448,7 +433,7 @@ static int dw_i2c_plat_suspend(struct device *dev)
{
struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
- if (i_dev->pm_disabled)
+ if (i_dev->shared_with_punit)
return 0;
i_dev->disable(i_dev);
@@ -461,7 +446,7 @@ static int dw_i2c_plat_resume(struct device *dev)
{
struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
- if (!i_dev->pm_disabled)
+ if (!i_dev->shared_with_punit)
i2c_dw_prepare_clk(i_dev, true);
i_dev->init(i_dev);
--
2.19.0.rc0
