On Mon, May 28, 2018 at 03:47:49PM +0300, Mika Westerberg wrote: > When Thunderbolt host router is configured to be in native enumeration mode > it is only present in the system if there is something connected to the > ports. This pretty much follows how the BIOS assisted mode works. > > In native enumeration mode the Thunderbolt host controller (NHI) and USB > host controller (xHCI) are not hot-added using native PCIe hotplug but > instead they will be hotplugged via BIOS triggered ACPI Notify() to the > root port. This is done to preserve resources since NHI and xHCI only need > 1 MB of MMIO space and no additional buses. Currently Linux does not > support this very well and ends up failing the hotplug in one way or > another. More detailed explanation is in changelog of patch [4/7]. > > This series fixes this issue and in addition includes fixes for few other > issues found during testing on a system that has Thunderbolt controller in > native PCIe enumeration mode. However, the fixes here are not in any way > Thunderbolt specific and should be applicable to other systems as well. > > The previous versions of the patch series can be found here: > > v7: https://www.spinics.net/lists/linux-pci/msg72558.html > v6: https://www.spinics.net/lists/linux-pci/msg72267.html > v5: https://www.spinics.net/lists/linux-pci/msg71339.html > v4: https://www.spinics.net/lists/linux-pci/msg71006.html > v3: https://www.spinics.net/lists/linux-acpi/msg80876.html > v2: https://www.spinics.net/lists/linux-pci/msg69186.html > v1: https://www.spinics.net/lists/linux-acpi/msg80607.html > > Changes from v7: > > - Rebased on top of pci.git pci/hotplug > - Make acpi_get_hp_hw_control_from_firmware() call shpchp_is_native() > - Drop !bridge check from shpchp_is_native() and update callers to handle > possibly NULL pdev > - Split out hotplug_is_native() into a separate patch > > Changes from v6: > > - Use IS_ENABLED(CONFIG_HOTPLUG_PCI_PCIE) and IS_ENABLED(CONFIG_HOTPLUG_PCI_SHPC) > directly instaed of wrapping them in macro > - Check for !bridge in the same condition than we check whether certain > native hotplug is enabled > - Add Rafael's Reviewed-by > > Changes from v5: > > - Dropped patch "PCI: Take bridge window alignment into account when > distributing resources" > - Rework pciehp_is_native() to be more stricter > - Make standard PCI hotplug driver (SHPC) builtin > - Rework the way we request OS control of native PCIe > hotplug (pciehp) and standard PCI hotplug (SHPC) > - Make acpiphp to avoid bridges where hotplug_is_native() returns true > (this is combined from pciehp and SHPC) > - Updated changelog of patch [7/12] > - Use hotplug_bridges + normal_bridges == 1 in patch [9/12] and also > remove one indent level from the loop. > > Because patch [7/12] looks quite different now I dropped Reviewed-by and > stable tag (it now depends on reworked pciehp/SHCP support that most > probably is not suitable for stable trees). > > I also was not able to test that SHPC really works because I don't have > hardware that supports it. > > Changes from v4: > > - Updated message in patch [8/9] following Rafael's suggestion > - Added Rafael's tag to patches 6, 7, 9. > > Changes from v3: > > - Added Andy's tag to patches [1-5] > - Improved changelog and subject line of patch [1/9] to match better what > it is trying to solve > - Improved comment in patch [1/9] > - Improved changelog of patches [2/9] and [4/9] accordingly to match > better why they are needed > - Added cleanup patches [6-9/9] > > Changes from v2: > > - Added Rafael's tag to patch [1/5] > - Updated changelog of patch [1/5] to include more details about how the > problem can be observed from dmesg and lspci output > > Changes from v1: > > - Drop 'cmax - max ?: 1' and use similar construct than we use in second > pass loop in patch [1/5] > - Drop unnecessary parentheses in patch [1/5] > - Added Rafael's tag to patches [2-5/5] > > Mika Westerberg (7): > PCI: Take all bridges into account when calculating bus numbers for extension > PCI: Introduce shpchp_is_native() > PCI: Introduce hotplug_is_native() > ACPI / hotplug / PCI: Do not scan all bridges when native PCIe hotplug is used > ACPI / hotplug / PCI: Mark stale PCI devices disconnected > PCI: Move resource distribution for a single bridge outside of the loop > PCI: Document return value of pci_scan_bridge() and pci_scan_bridge_extend() I only see these on the mailing list and in patchwork: [PATCH v8 1/7] PCI: Take all bridges into account when calculating bus numbers for extension [PATCH v8 2/7] PCI: Introduce shpchp_is_native() [PATCH v8 3/7] PCI: Introduce hotplug_is_native() [PATCH v8 6/7] PCI: Move resource distribution for a single bridge outside of the loop [PATCH v8 7/7] PCI: Document return value of pci_scan_bridge() and pci_scan_bridge_extend() Looks like patches 4 and 5 are missing for some reason. -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
