On Thu, May 10, 2018 at 09:28:32PM +0300, Mika Westerberg wrote: > Hi, > > When Thunderbolt host router is configured to be in native enumeration mode > it is only present in the system if there is something connected to the > ports. This pretty much follows how the BIOS assisted mode works. > > In native enumeration mode the Thunderbolt host controller (NHI) and USB > host controller (xHCI) are not hot-added using native PCIe hotplug but > instead they will be hotplugged via BIOS triggered ACPI Notify() to the > root port. This is done to preserve resources since NHI and xHCI only need > 1 MB of MMIO space and no additional buses. Currently Linux does not > support this very well and ends up failing the hotplug in one way or > another. More detailed explanation is in changelog of patch [7/12]. > > This series fixes this issue and in addition includes fixes for few other > issues found during testing on a system that has Thunderbolt controller in > native PCIe enumeration mode. However, the fixes here are not in any way > Thunderbolt specific and should be applicable to other systems as well. > > The previous versions of the patch series can be found here: > > v5: https://www.spinics.net/lists/linux-pci/msg71339.html > v4: https://www.spinics.net/lists/linux-pci/msg71006.html > v3: https://www.spinics.net/lists/linux-acpi/msg80876.html > v2: https://www.spinics.net/lists/linux-pci/msg69186.html > v1: https://www.spinics.net/lists/linux-acpi/msg80607.html > > Changes from v5: > > - Dropped patch "PCI: Take bridge window alignment into account when > distributing resources" > - Rework pciehp_is_native() to be more stricter > - Make standard PCI hotplug driver (SHPC) builtin > - Rework the way we request OS control of native PCIe > hotplug (pciehp) and standard PCI hotplug (SHPC) > - Make acpiphp to avoid bridges where hotplug_is_native() returns true > (this is combined from pciehp and SHPC) > - Updated changelog of patch [7/12] > - Use hotplug_bridges + normal_bridges == 1 in patch [9/12] and also > remove one indent level from the loop. > > Because patch [7/12] looks quite different now I dropped Reviewed-by and > stable tag (it now depends on reworked pciehp/SHCP support that most > probably is not suitable for stable trees). > > I also was not able to test that SHPC really works because I don't have > hardware that supports it. > > Changes from v4: > > - Updated message in patch [8/9] following Rafael's suggestion > - Added Rafael's tag to patches 6, 7, 9. > > Changes from v3: > > - Added Andy's tag to patches [1-5] > - Improved changelog and subject line of patch [1/9] to match better what > it is trying to solve > - Improved comment in patch [1/9] > - Improved changelog of patches [2/9] and [4/9] accordingly to match > better why they are needed > - Added cleanup patches [6-9/9] > > Changes from v2: > > - Added Rafael's tag to patch [1/5] > - Updated changelog of patch [1/5] to include more details about how the > problem can be observed from dmesg and lspci output > > Changes from v1: > > - Drop 'cmax - max ?: 1' and use similar construct than we use in second > pass loop in patch [1/5] > - Drop unnecessary parentheses in patch [1/5] > - Added Rafael's tag to patches [2-5/5] > > Mika Westerberg (12): > PCI: Take all bridges into account when calculating bus numbers for extension > PCI: pciehp: Clear Presence Detect and Data Link Layer Status Changed on resume > PCI: Request control of native PCIe hotplug only if supported > PCI: Make pciehp_is_native() stricter > PCI: hotplug: Convert SHPC to be builtin only > PCI: Request control of native SHPC hotplug similarly to pciehp > ACPI / hotplug / PCI: Do not scan all bridges when native PCIe hotplug is used > ACPI / hotplug / PCI: Mark stale PCI devices disconnected > PCI: Move resource distribution for a single bridge outside of the loop > PCI: Document return value of pci_scan_bridge() and pci_scan_bridge_extend() > PCI: Improve "partially hidden behind bridge" log message > ACPI / hotplug / PCI: Drop unnecessary parentheses I applied the following to pci/hotplug for v4.18: PCI: pciehp: Clear Presence Detect and Data Link Layer Status Changed on resume PCI: Request control of native PCIe hotplug only if supported PCI: Rename host->native_hotplug to host->native_pcie_hotplug PCI: hotplug: Make pciehp_is_native() stricter PCI: hotplug: Convert SHPC to be builtin only PCI: shpchp: Simplify acpi_get_hp_hw_control_from_firmware() PCI: shpchp: Request control of native SHPC hotplug via _OSC PCI: Improve "partially hidden behind bridge" log message ACPI / hotplug / PCI: Drop unnecessary parentheses I split a couple of these into smaller pieces and removed one NULL pointer check, but otherwise they're straightforward. These are the simple pieces that probably don't fix anything by themselves. I'm looking at the other parts too and have a couple comments there, but at least we can clear these off the plate. -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
