The BSG1160 ACPI HID is a HID describing a sensor complex consisting of
3 sensors:
Accel: BMC150A at addr 0x11
Gyro: BMG160 at addr 0x68
Magneto: BMC150B at addr 0x13
A previous patch on this series has added the BSG1160 HID to the
i2c_acpi_multiple_devices_ids list, so that one i2c_client gets
instantiated per sensor.
This commit not only adds the BSG1160 HID to the bmc150 code, but it also
makes the i2c probe function check the client address for devices with a
BSG1160 HID and only bind to the one at address 0x13.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/iio/magnetometer/bmc150_magn_i2c.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/iio/magnetometer/bmc150_magn_i2c.c b/drivers/iio/magnetometer/bmc150_magn_i2c.c
index 57e40dd1222e..c8a1e4178462 100644
--- a/drivers/iio/magnetometer/bmc150_magn_i2c.c
+++ b/drivers/iio/magnetometer/bmc150_magn_i2c.c
@@ -27,9 +27,17 @@
static int bmc150_magn_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
+ const struct acpi_device_id *acpi_id;
struct regmap *regmap;
+ struct device *dev = &client->dev;
const char *name = NULL;
+ /* The BSG1160 ACPI id describes multiple sensors, only bind to ours */
+ acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev);
+ if (acpi_id && acpi_id->driver_data &&
+ client->addr != acpi_id->driver_data)
+ return -ENODEV;
+
regmap = devm_regmap_init_i2c(client, &bmc150_magn_regmap_config);
if (IS_ERR(regmap)) {
dev_err(&client->dev, "Failed to initialize i2c regmap\n");
@@ -51,6 +59,7 @@ static const struct acpi_device_id bmc150_magn_acpi_match[] = {
{"BMC150B", 0},
{"BMC156B", 0},
{"BMM150B", 0},
+ {"BSG1160", 0x13},
{},
};
MODULE_DEVICE_TABLE(acpi, bmc150_magn_acpi_match);
--
2.17.0
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
