On Thu, 2018-05-10 at 17:25 +0200, Rafael J. Wysocki wrote: > On Thursday, April 26, 2018 2:10:23 PM CEST Hans de Goede wrote: > > On some devices the contents of the ctrl register get lost over a > > suspend/resume and the PWM comes back up disabled after the resume. > > > > This is seen on some Bay Trail devices with the PWM in ACPI > > enumerated > > mode, so it shows up as a platform device instead of a PCI device. > > > > If we still think it is enabled and then try to change the duty- > > cycle > > after this, we end up with a "PWM_SW_UPDATE was not cleared" error > > and > > the PWM is stuck in that state from then on. > > > > This commit adds suspend and resume pm callbacks to the pwm-lpss- > > platform > > code, which save/restore the ctrl register over a suspend/resume, > > fixing > > this. > > > > Note that: > > > > 1) There is no need to do this over a runtime suspend, since we > > only runtime suspend when disabled and then we properly set the > > enable > > bit and reprogram the timings when we re-enable the PWM. > > > > 2) This may be happening on more systems then we realize, but has > > been > > covered up sofar by a bug in the acpi-lpss.c code which was > > save/restoring > > the regular device registers instead of the lpss private registers > > due to > > lpss_device_desc.prv_offset not being set. This is fixed by a later > > patch > > in this series. > > > > Cc: stable@xxxxxxxxxxxxxxx > > Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> > > Andy, Thierry, any comments or concerns regarding this series? Fine by me: Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> -- Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> Intel Finland Oy -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
