On Wed, May 9, 2018 at 12:18 AM, Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
>
> Commit 0847684cfc5f0 (PCI / PM: Simplify device wakeup settings code)
> went too far and dropped the device_may_wakeup() check from
> pci_enable_wake() which causes wakeup to be enabled during system
> suspend, hibernation or shutdown for some PCI devices that are not
> allowed by user space to wake up the system from sleep (or power off).
>
> As a result of this excessive power is drawn by some of the affected
> systems while in sleep states or off.
>
> Restore the device_may_wakeup() check in pci_enable_wake(), but make
> sure that the PCI bus type's runtime suspend callback will not call
> device_may_wakeup() which is about system wakeup from sleep and not
> about device wakeup from runtime suspend.
>
> Fixes: 0847684cfc5f0 (PCI / PM: Simplify device wakeup settings code)
> Reported-by: Joseph Salisbury <joseph.salisbury@xxxxxxxxxxxxx>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
Bjorn, any concerns here?
> ---
> drivers/pci/pci.c | 29 +++++++++++++++++++++++------
> 1 file changed, 23 insertions(+), 6 deletions(-)
>
> Index: linux-pm/drivers/pci/pci.c
> ===================================================================
> --- linux-pm.orig/drivers/pci/pci.c
> +++ linux-pm/drivers/pci/pci.c
> @@ -1910,7 +1910,7 @@ void pci_pme_active(struct pci_dev *dev,
> EXPORT_SYMBOL(pci_pme_active);
>
> /**
> - * pci_enable_wake - enable PCI device as wakeup event source
> + * __pci_enable_wake - enable PCI device as wakeup event source
> * @dev: PCI device affected
> * @state: PCI state from which device will issue wakeup events
> * @enable: True to enable event generation; false to disable
> @@ -1928,7 +1928,7 @@ EXPORT_SYMBOL(pci_pme_active);
> * Error code depending on the platform is returned if both the platform and
> * the native mechanism fail to enable the generation of wake-up events
> */
> -int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable)
> +static int __pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable)
> {
> int ret = 0;
>
> @@ -1969,6 +1969,23 @@ int pci_enable_wake(struct pci_dev *dev,
>
> return ret;
> }
> +
> +/**
> + * pci_enable_wake - change wakeup settings for a PCI device
> + * @pci_dev: Target device
> + * @state: PCI state from which device will issue wakeup events
> + * @enable: Whether or not to enable event generation
> + *
> + * If @enable is set, check device_may_wakeup() for the device before calling
> + * __pci_enable_wake() for it.
> + */
> +int pci_enable_wake(struct pci_dev *pci_dev, pci_power_t state, bool enable)
> +{
> + if (enable && !device_may_wakeup(&pci_dev->dev))
> + return -EINVAL;
> +
> + return __pci_enable_wake(pci_dev, state, enable);
> +}
> EXPORT_SYMBOL(pci_enable_wake);
>
> /**
> @@ -1981,9 +1998,9 @@ EXPORT_SYMBOL(pci_enable_wake);
> * should not be called twice in a row to enable wake-up due to PCI PM vs ACPI
> * ordering constraints.
> *
> - * This function only returns error code if the device is not capable of
> - * generating PME# from both D3_hot and D3_cold, and the platform is unable to
> - * enable wake-up power for it.
> + * This function only returns error code if the device is not allowed to wake
> + * up the system from sleep or it is not capable of generating PME# from both
> + * D3_hot and D3_cold and the platform is unable to enable wake-up power for it.
> */
> int pci_wake_from_d3(struct pci_dev *dev, bool enable)
> {
> @@ -2114,7 +2131,7 @@ int pci_finish_runtime_suspend(struct pc
>
> dev->runtime_d3cold = target_state == PCI_D3cold;
>
> - pci_enable_wake(dev, target_state, pci_dev_run_wake(dev));
> + __pci_enable_wake(dev, target_state, pci_dev_run_wake(dev));
>
> error = pci_set_power_state(dev, target_state);
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
