AMD ST/CZ platform provides a general system clock which can be used by any driver. Registration of this clock will done in clk-st driver. While the ACPI misc device will create the required MMIO mappings and pass the same to the clk-st driver. The clk-st driver will use the address to enable/disable and set frequency. Changelog: v2: clk: x86: Add ST oscout platform clock: v3->v4 unregister clk_hw ACPI: APD: Add AMD misc clock handler support: No change (v2) Akshu Agrawal (2): clk: x86: Add ST oscout platform clock ACPI: APD: Add AMD misc clock handler support drivers/acpi/acpi_apd.c | 50 ++++++++++++++++++++ drivers/clk/x86/Makefile | 1 + drivers/clk/x86/clk-st.c | 88 ++++++++++++++++++++++++++++++++++++ include/linux/platform_data/clk-st.h | 35 ++++++++++++++ 4 files changed, 174 insertions(+) create mode 100644 drivers/clk/x86/clk-st.c create mode 100644 include/linux/platform_data/clk-st.h -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
