[PATCH 2/2] ACPICA: Convert acpi_gbl_hardware lock back to an acpi_raw_spinlock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Steven Rostedt <rostedt@xxxxxxxxxxx>

We hit the following bug with -RT:

|BUG: scheduling while atomic: swapper/7/0/0x00000002
|Pid: 0, comm: swapper/7 Not tainted 3.6.11-rt28.19.el6rt.x86_64.debug #1
|Call Trace:
|  rt_spin_lock+0x16/0x40
|  __schedule_bug+0x67/0x90
|  __schedule+0x793/0x7a0
|  acpi_os_acquire_lock+0x1f/0x23
|  acpi_write_bit_register+0x33/0xb0
|  rt_spin_lock_slowlock+0xe5/0x2f0
|  acpi_idle_enter_bm+0x8a/0x28e
…
As the acpi code disables interrupts in acpi_idle_enter_bm, and calls
code that grabs the acpi lock, it causes issues as the lock is currently
in RT a sleeping lock.

The lock was converted from a raw to a sleeping lock due to some
previous issues, and tests that showed it didn't seem to matter.
Unfortunately, it did matter for one of our boxes.

This patch converts the lock back to a raw lock. I've run this code on a
few of my own machines, one being my laptop that uses the acpi quite
extensively. I've been able to suspend and resume without issues.

[ tglx: Made the change exclusive for acpi_gbl_hardware_lock ]

Signed-off-by: Steven Rostedt <rostedt@xxxxxxxxxxx>
Cc: John Kacur <jkacur@xxxxxxxxx>
Cc: Clark Williams <clark@xxxxxxxxxx>
Link: http://lkml.kernel.org/r/1360765565.23152.5.camel@xxxxxxxxxxxxxxxxxx
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
[bigeasy: shorten the backtrace, use the type acpi_raw_spinlock incl.
 accessor]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
---
 drivers/acpi/acpica/acglobal.h | 2 +-
 drivers/acpi/acpica/hwregs.c   | 4 ++--
 drivers/acpi/acpica/hwxface.c  | 4 ++--
 drivers/acpi/acpica/utmutex.c  | 4 ++--
 4 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h
index 0bc550072a21..1e6204518496 100644
--- a/drivers/acpi/acpica/acglobal.h
+++ b/drivers/acpi/acpica/acglobal.h
@@ -82,7 +82,7 @@ ACPI_GLOBAL(u8, acpi_gbl_global_lock_pending);
  * interrupt level
  */
 ACPI_GLOBAL(acpi_spinlock, acpi_gbl_gpe_lock);	/* For GPE data structs and registers */
-ACPI_GLOBAL(acpi_spinlock, acpi_gbl_hardware_lock);	/* For ACPI H/W except GPE registers */
+ACPI_GLOBAL(acpi_raw_spinlock, acpi_gbl_hardware_lock);	/* For ACPI H/W except GPE registers */
 ACPI_GLOBAL(acpi_spinlock, acpi_gbl_reference_count_lock);
 
 /* Mutex for _OSI support */
diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c
index 27a86ad55b58..3de794bcf8fa 100644
--- a/drivers/acpi/acpica/hwregs.c
+++ b/drivers/acpi/acpica/hwregs.c
@@ -390,14 +390,14 @@ acpi_status acpi_hw_clear_acpi_status(void)
 			  ACPI_BITMASK_ALL_FIXED_STATUS,
 			  ACPI_FORMAT_UINT64(acpi_gbl_xpm1a_status.address)));
 
-	lock_flags = acpi_os_acquire_lock(acpi_gbl_hardware_lock);
+	lock_flags = acpi_os_acquire_raw_lock(acpi_gbl_hardware_lock);
 
 	/* Clear the fixed events in PM1 A/B */
 
 	status = acpi_hw_register_write(ACPI_REGISTER_PM1_STATUS,
 					ACPI_BITMASK_ALL_FIXED_STATUS);
 
-	acpi_os_release_lock(acpi_gbl_hardware_lock, lock_flags);
+	acpi_os_release_raw_lock(acpi_gbl_hardware_lock, lock_flags);
 
 	if (ACPI_FAILURE(status)) {
 		goto exit;
diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c
index 5d1396870bd0..6e39a771a56e 100644
--- a/drivers/acpi/acpica/hwxface.c
+++ b/drivers/acpi/acpica/hwxface.c
@@ -227,7 +227,7 @@ acpi_status acpi_write_bit_register(u32 register_id, u32 value)
 		return_ACPI_STATUS(AE_BAD_PARAMETER);
 	}
 
-	lock_flags = acpi_os_acquire_lock(acpi_gbl_hardware_lock);
+	lock_flags = acpi_os_acquire_raw_lock(acpi_gbl_hardware_lock);
 
 	/*
 	 * At this point, we know that the parent register is one of the
@@ -288,7 +288,7 @@ acpi_status acpi_write_bit_register(u32 register_id, u32 value)
 
 unlock_and_exit:
 
-	acpi_os_release_lock(acpi_gbl_hardware_lock, lock_flags);
+	acpi_os_release_raw_lock(acpi_gbl_hardware_lock, lock_flags);
 	return_ACPI_STATUS(status);
 }
 
diff --git a/drivers/acpi/acpica/utmutex.c b/drivers/acpi/acpica/utmutex.c
index d2d93e388f40..2e465e6a0ab6 100644
--- a/drivers/acpi/acpica/utmutex.c
+++ b/drivers/acpi/acpica/utmutex.c
@@ -52,7 +52,7 @@ acpi_status acpi_ut_mutex_initialize(void)
 		return_ACPI_STATUS (status);
 	}
 
-	status = acpi_os_create_lock (&acpi_gbl_hardware_lock);
+	status = acpi_os_create_raw_lock(&acpi_gbl_hardware_lock);
 	if (ACPI_FAILURE (status)) {
 		return_ACPI_STATUS (status);
 	}
@@ -109,7 +109,7 @@ void acpi_ut_mutex_terminate(void)
 	/* Delete the spinlocks */
 
 	acpi_os_delete_lock(acpi_gbl_gpe_lock);
-	acpi_os_delete_lock(acpi_gbl_hardware_lock);
+	acpi_os_delete_raw_lock(acpi_gbl_hardware_lock);
 	acpi_os_delete_lock(acpi_gbl_reference_count_lock);
 
 	/* Delete the reader/writer lock */
-- 
2.17.0

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux