On Tue, Mar 27, 2018 at 01:57:42PM -0500, Bjorn Helgaas wrote:
> On Mon, Feb 26, 2018 at 04:21:08PM +0300, Mika Westerberg wrote:
> > When distributing extra buses between hotplug bridges we need to make
> > sure each bridge reserve at least one bus number, even if there is
> > currently nothing connected to it. For instance ACPI hotplug may bring
> > in additional devices to non-hotplug bridges later on.
>
> I guess you mean ACPI hotplug can add devices below bridges that have
> "bridge->is_hotplug_bridge == 0"? Why don't we set is_hotplug_bridge
> in that case? I do see that acpiphp sets it in *some* cases (see
> check_hotplug_bridge()). Are we missing some case?
We don't know upfront that these ports are going to get devices below
them. Only thing that happens in these cases is that we may get ACPI
Notify() to the root port leading to these ports.
Also the allocation strategy we use is based on ->is_hotplug_bridge ==
1. Those bridges will be assigned all the remaining bus space and
resources. If we somehow set ->is_hotplug_bridge == 1 for these
non-hotplug ports it means that we now include those ports also when
resources are distributed which defeats the reason why ACPI Notify() is
used there in the first place (to preseve bus numbers).
> > Here is what happens on one system when a Thunderbolt device is plugged in:
> >
> > pci 0000:01:00.0: PCI bridge to [bus 02-39]
> > ...
> > pci_bus 0000:04: [bus 04-39] extended by 0x35
> > pci_bus 0000:04: bus scan returning with max=39
> > pci_bus 0000:04: busn_res: [bus 04-39] end is updated to 39
> > pci 0000:02:02.0: scanning [bus 00-00] behind bridge, pass 1
> > pci_bus 0000:3a: scanning bus
> > pci_bus 0000:3a: bus scan returning with max=3a
> > pci_bus 0000:3a: busn_res: [bus 3a] end is updated to 3a
> > pci_bus 0000:3a: [bus 3a] partially hidden behind bridge 0000:02 [bus 02-39]
> > pci_bus 0000:3a: [bus 3a] partially hidden behind bridge 0000:01 [bus 01-39]
> > pci_bus 0000:02: bus scan returning with max=3a
> > pci_bus 0000:02: busn_res: [bus 02-39] end can not be updated to 3a
> >
> > Resulting 'lspci -t' output looks like this:
> >
> > +-1b.0-[01-39]----00.0-[02-3a]--+-00.0-[03]----00.0
> > +-01.0-[04-39]--
> > \-02.0-[3a]----00.0
> >
> > The device behind downstream port at 02:02 is the integrated xHCI (USB 3
> > host controller) and is not fully accessible because the hotplug bridge
> > is reserving too many bus numbers.
>
> Thanks for the details here, but I can't tell what happened before and
> was broken, vs. what happens now. Which is the hotplug bridge? Which
> is the Thunderbolt controller?
>
> I guess 02:01.0 must be the bridge consuming too many bus numbers
> ([bus 04-39])?
Yes, that's correct.
> And 02:02.0 might be the Thunderbolt controller that wants to use bus
> 3a? But obviously that won't work because 1b.0 doesn't route things
> to bus 3a, since it only consumes [bus 01-39].
In fact 02:02 leads to xHCI controller which in this case is
inaccessible which means that currently when you plug in USB 3 device to
systems with this setup, it won't work.
> (The device behind 02:02.0 is more than just "not fully accessible" --
> it's not accessible via config space *at all*.)
Right.
> I guess the 'lspci -t' above must be without this patch, and with this
> patch, we'd have
>
> pci 0000:02:00.0: PCI bridge to [bus 03]
> pci 0000:02:01.0: PCI bridge to [bus 04-38]
> pci 0000:02:02.0: PCI bridge to [bus 39]
That's correct.
Do you want me to amend the changelog to include this information as
well?
> This patch might fix the situation for simple hot-added devices, but
> won't we have the same problem again if we hot-add a bridge? It seems
> like we need a more comprehensive solution. I don't mean we need to
> go whole hog and reassign everybody's bus numbers dynamically, but we
> ought to at least be able to notice the situation, decline to enable
> the bridge leading to devices we can't reach, and give a meaningful
> error message.
The problem is that you don't know upfront what is going to be
hotplugged. Thus it is hard to guess how many buses you want to reserve
there. Doing that afterwards is not going to work because of the nature
how we do scan and add devices, without rewriting the whole scanning
logic.
The strategy we use here is the same as Windows does (e.g reserve one
bus for these bridges, just in case ACPI Notify() brings in a new
device. This is kind of special case used to hotplug TBT and xHCI
controller (not bridges). It will not work properly if you hotplug a
bridge but at least it works better than just failing miserably.
If you have better ideas how to handle this, I'm all ears :)
The sanity check at the end of pci_scan_bridge_extend() already detects
cases where things went wrong:
pci_bus 0000:3a: [bus 3a] partially hidden behind bridge 0000:02 [bus 02-39]
pci_bus 0000:3a: [bus 3a] partially hidden behind bridge 0000:01 [bus 01-39]
I'm not sure wheter we want to add more error prints to confuse users.
(We actually look for these strings in our test automation for native
PCIe hotplug).
> Nit unrelated to this patch: "bridge 0000:02" is not a bridge, it's a
> bus. Apparently bus 3a is hidden because 1b.0's subordinate bus is
> 39.
Indeed.
> > To make sure we don't run out of bus numbers for non-hotplug bridges reserve
> > one bus number for them upfront before distributing buses for hotplug bridges.
> >
> > Fixes: 1c02ea810065 ("PCI: Distribute available buses to hotplug-capable bridges")
> > Reported-by: Mario Limonciello <mario.limonciello@xxxxxxxx>
> > Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
> > Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
> > Cc: stable@xxxxxxxxxxxxxxx
> > ---
> > drivers/pci/probe.c | 11 ++++++++---
> > 1 file changed, 8 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> > index ef5377438a1e..6cefd47556e3 100644
> > --- a/drivers/pci/probe.c
> > +++ b/drivers/pci/probe.c
> > @@ -2561,7 +2561,10 @@ static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus,
> > for_each_pci_bridge(dev, bus) {
> > cmax = max;
> > max = pci_scan_bridge_extend(bus, dev, max, 0, 0);
> > - used_buses += cmax - max;
> > + /* Reserve one bus for each bridge */
> > + used_buses++;
> > + if (cmax - max > 1)
> > + used_buses += cmax - max - 1;
>
> Sorry, this should be trivial, but I'm having a hard time wrapping my
> mind around it.
I don't blame you, it is getting quite complex. That's why I added the
comments there, hopefully makeing it easier to understand.
> AFAICT, "cmax" is the highest known bus number below this bus, "max"
> is the highest bus number below "dev" (one of the bridges on "bus").
>
> I assume "used_buses++" accounts for the fact that every enabled
> bridge must consume one bus number for its secondary side.
Exactly.
> And I guess "used_buses += cmax - max - 1" adds in the bus numbers
> downstream from "dev" (subtracting the one used for its secondary
> bus)?
That's also correct.
> pci_scan_bridge_extend() seems to return something related to the
> number of bus numbers used below "dev". Why doesn't *it* account for
> the secondary bus number of "dev"?
It returns new "max" i.e maximum subordinate number the bridge occupies.
Reason why we handle this one in pci_scan_child_bus_extend() instead is
that we then have the bus number distribution logic pretty much in a
single function making it easier to understand what happens (well, it is
getting quite complex but I still think it makes sense that way). If you
insist, I can move it to pci_scan_bridge_extend() istead.
> It might help if the pci_scan_bridge_extend() function comment were
> extended to say what it actually returns.
I can make a separate patch adding comment about the return value. These
functions all return new "max" but I suppose it makes sense to document it.
> > }
> >
> > /* Scan bridges that need to be reconfigured */
> > @@ -2584,12 +2587,14 @@ static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus,
> > * bridges if any.
> > */
> > buses = available_buses / hotplug_bridges;
> > - buses = min(buses, available_buses - used_buses);
> > + buses = min(buses, available_buses - used_buses + 1);
> > }
> >
> > cmax = max;
> > max = pci_scan_bridge_extend(bus, dev, cmax, buses, 1);
> > - used_buses += max - cmax;
> > + /* One bus is already accounted so don't add it again */
> > + if (max - cmax > 1)
> > + used_buses += max - cmax - 1;
> > }
> >
> > /*
> > --
> > 2.16.1
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
