On Tue, 2018-02-27 at 17:17 +0100, Rafael J. Wysocki wrote: > On Mon, Feb 26, 2018 at 3:41 PM, Enric Balletbo i Serra > <enric.balletbo@xxxxxxxxxxxxx> wrote: > > > > From: Sameer Nanda <snanda@xxxxxxxxxxxx> > > > > In the acpi_thermal_add path, acpi_thermal_get_info gets called > > before > > acpi_thermal_register_thermal_zone. Since tz_enabled was getting > > set to > > 1 only in acpi_thermal_register_thermal_zone, acpi_thermal_get_info > > ended up disabling thermal polling. > > > > Moved setting of tz_enabled to 1 into acpi_thermal_add itself. > > > > Signed-off-by: Sameer Nanda <snanda@xxxxxxxxxxxx> > > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx > > > > > --- > > That's another attempt to land these to patches that were sent long > > time > > ago but never got merged, although, apparently, there is no issue > > with > > it. Latest discussion about these here: > > > > https://www.mail-archive.com/linux-kernel@xxxxxxxxxxxxxxx/msg14360 > > 81.html > I can apply this one, but the other one has to go in through the > Rui's tree. > No, the patch set was queued in my tree and then dropped. This is because, the second patch makes the assumption that the soc thermal driver .get_mode() must reflect the real thermal zone status upon the thermal zone registration, but this is not true after checking some of the driver code. To apply patch 2/2, extra effort, which checks and fixes all the thermal drivers one by one, is needed. It would be nice if someone can do this, or else I will work on this, but some time later. thanks, rui > > > > Changes in v3: > > - [1/2] Make sure tz->tz_enabled is set properly before registering > > the > > zone (Zhang Rui) > > > > Changes in v2: > > - [1/2] This patch is new from v1 > > (https://patchwork.kernel.org/patch/9804229/) > > > > drivers/acpi/thermal.c | 3 +-- > > 1 file changed, 1 insertion(+), 2 deletions(-) > > > > diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c > > index 551b71a24b85..1d8f185e96c6 100644 > > --- a/drivers/acpi/thermal.c > > +++ b/drivers/acpi/thermal.c > > @@ -930,8 +930,6 @@ static int > > acpi_thermal_register_thermal_zone(struct acpi_thermal *tz) > > if (ACPI_FAILURE(status)) > > return -ENODEV; > > > > - tz->tz_enabled = 1; > > - > > dev_info(&tz->device->dev, "registered as > > thermal_zone%d\n", > > tz->thermal_zone->id); > > return 0; > > @@ -1088,6 +1086,7 @@ static int acpi_thermal_add(struct > > acpi_device *device) > > return -ENOMEM; > > > > tz->device = device; > > + tz->tz_enabled = 1; > > strcpy(tz->name, device->pnp.bus_id); > > strcpy(acpi_device_name(device), ACPI_THERMAL_DEVICE_NAME); > > strcpy(acpi_device_class(device), ACPI_THERMAL_CLASS); > > -- > > 2.16.1 > > > > -- > > To unsubscribe from this list: send the line "unsubscribe linux- > > acpi" in > > the body of a message to majordomo@xxxxxxxxxxxxxxx > > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
