Re: [PATCH v6 11/12] arm64: topology: enable ACPI/PPTT based CPU topology

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,
On 2018/2/23 19:02, Lorenzo Pieralisi wrote:
> On Thu, Jan 25, 2018 at 09:56:30AM -0600, Jeremy Linton wrote:
>> Hi,
>>
>> On 01/25/2018 06:15 AM, Xiongfeng Wang wrote:
>>> Hi Jeremy,
>>>
>>> I have tested the patch with the newest UEFI. It prints the below error:
>>>
>>> [    4.017371] BUG: arch topology borken
>>> [    4.021069] BUG: arch topology borken
>>> [    4.024764] BUG: arch topology borken
>>> [    4.028460] BUG: arch topology borken
>>> [    4.032153] BUG: arch topology borken
>>> [    4.035849] BUG: arch topology borken
>>> [    4.039543] BUG: arch topology borken
>>> [    4.043239] BUG: arch topology borken
>>> [    4.046932] BUG: arch topology borken
>>> [    4.050629] BUG: arch topology borken
>>> [    4.054322] BUG: arch topology borken
>>>
>>> I checked the code and found that the newest UEFI set PPTT physical_package_flag on a physical package node and
>>> the NUMA domain (SRAT domains) starts from the layer of DIE. (The topology of our board is core->cluster->die->package).
>>
>> I commented about that on the EDK2 mailing list. While the current spec
>> doesn't explicitly ban having the flag set multiple times between the leaf
>> and the root I consider it a "bug" and there is an effort to clarify the
>> spec and the use of that flag.
>>>
>>> When the kernel starts to build sched_domain, the multi-core sched_domain contains all the cores within a package,
>>> and the lowest NUMA sched_domain contains all the cores within a die. But the kernel requires that the multi-core
>>> sched_domain should be a subset of the lowest NUMA sched_domain, so the BUG info is printed.
>>
>> Right. I've mentioned this problem a couple of times.
>>
>> At at the moment, the spec isn't clear about how the proximity domain is
>> detected/located within the PPTT topology (a node with a 1:1 correspondence
>> isn't even required). As you can see from this patch set, we are making the
>> general assumption that the proximity domains are at the same level as the
>> physical socket. This isn't ideal for NUMA topologies, like the D05, that
>> don't align with the physical socket.
>>
>> There are efforts underway to clarify and expand upon the specification to
>> deal with this general problem. The simple solution is another flag (say
>> PPTT_PROXIMITY_DOMAIN which would map to the D05 die) which could be used to
>> find nodes with 1:1 correspondence. At that point we could add a fairly
>> trivial patch to correct just the scheduler topology without affecting the
>> rest of the system topology code.
> 
> I think Morten asked already but isn't this the same end result we end
> up having if we remove the DIE level if NUMA-within-package is detected
> (instead of using the default_topology[]) and we create our own ARM64
> domain hierarchy (with DIE level removed) through set_sched_topology()
> accordingly ?
> 
> Put it differently: do we really need to rely on another PPTT flag to
> collect this information ?
> 
> I can't merge code that breaks a platform with legitimate firmware
> bindings.

I think we really need another PPTT flag, from which we can get information
about how to build a multi-core sched_domain. I think only cache-sharing information
is not enough to get information about how to build a multi-core shced_domain.

How about this? We assume the upper layer of the lowest layer to be multi-core layer.
After that flag is added into ACPI specs, we add another patch to adapt to the change.

Thanks,
Xiongfeng

> 
> Thanks,
> Lorenzo
> 
>>
>>>
>>> If we modify the UEFI to make NUMA sched_domain start from the layer of package, then all the topology information
>>> within the package will be discarded. I think we need to build the multi-core sched_domain using the cores within
>>> the cluster instead of the cores within the package. I think that's what 'multi-core' means. Multi cores form a cluster. I guess.
>>> If we build the multi-core sched_domain using the cores within a cluster, I think we need to add fields in struct cpu_topology
>>> to record which cores are in each cluster.
>>
>> The problem is that there isn't a generic way to identify which level of
>> cache sharing is the "correct" top layer MC domain. For one system cluster
>> might be appropriate, for another it might be the highest caching level
>> within a socket, for another is might be a something in between or a group
>> of clusters or LLCs..
>>
>> Hence the effort to standardize/guarantee a PPTT node that exactly matches a
>> SRAT domain. With that, each SOC/system provider has clearly defined method
>> for communicating where they want the proximity domain information to begin.
>>
>> Thanks,
>>
>>>
>>>
>>> Thanks,
>>> Xiongfeng
>>>
>>> On 2018/1/13 8:59, Jeremy Linton wrote:
>>>> Propagate the topology information from the PPTT tree to the
>>>> cpu_topology array. We can get the thread id, core_id and
>>>> cluster_id by assuming certain levels of the PPTT tree correspond
>>>> to those concepts. The package_id is flagged in the tree and can be
>>>> found by calling find_acpi_cpu_topology_package() which terminates
>>>> its search when it finds an ACPI node flagged as the physical
>>>> package. If the tree doesn't contain enough levels to represent
>>>> all of the requested levels then the root node will be returned
>>>> for all subsequent levels.
>>>>
>>>> Cc: Juri Lelli <juri.lelli@xxxxxxx>
>>>> Signed-off-by: Jeremy Linton <jeremy.linton@xxxxxxx>
>>>> ---
>>>>  arch/arm64/kernel/topology.c | 46 +++++++++++++++++++++++++++++++++++++++++++-
>>>>  1 file changed, 45 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/arch/arm64/kernel/topology.c b/arch/arm64/kernel/topology.c
>>>> index 7b06e263fdd1..ce8ec7fd6b32 100644
>>>> --- a/arch/arm64/kernel/topology.c
>>>> +++ b/arch/arm64/kernel/topology.c
>>>> @@ -11,6 +11,7 @@
>>>>   * for more details.
>>>>   */
>>>> +#include <linux/acpi.h>
>>>>  #include <linux/arch_topology.h>
>>>>  #include <linux/cpu.h>
>>>>  #include <linux/cpumask.h>
>>>> @@ -22,6 +23,7 @@
>>>>  #include <linux/sched.h>
>>>>  #include <linux/sched/topology.h>
>>>>  #include <linux/slab.h>
>>>> +#include <linux/smp.h>
>>>>  #include <linux/string.h>
>>>>  #include <asm/cpu.h>
>>>> @@ -300,6 +302,46 @@ static void __init reset_cpu_topology(void)
>>>>  	}
>>>>  }
>>>> +#ifdef CONFIG_ACPI
>>>> +/*
>>>> + * Propagate the topology information of the processor_topology_node tree to the
>>>> + * cpu_topology array.
>>>> + */
>>>> +static int __init parse_acpi_topology(void)
>>>> +{
>>>> +	bool is_threaded;
>>>> +	int cpu, topology_id;
>>>> +
>>>> +	is_threaded = read_cpuid_mpidr() & MPIDR_MT_BITMASK;
>>>> +
>>>> +	for_each_possible_cpu(cpu) {
>>>> +		topology_id = find_acpi_cpu_topology(cpu, 0);
>>>> +		if (topology_id < 0)
>>>> +			return topology_id;
>>>> +
>>>> +		if (is_threaded) {
>>>> +			cpu_topology[cpu].thread_id = topology_id;
>>>> +			topology_id = find_acpi_cpu_topology(cpu, 1);
>>>> +			cpu_topology[cpu].core_id   = topology_id;
>>>> +			topology_id = find_acpi_cpu_topology_package(cpu);
>>>> +			cpu_topology[cpu].package_id = topology_id;
>>>> +		} else {
>>>> +			cpu_topology[cpu].thread_id  = -1;
>>>> +			cpu_topology[cpu].core_id    = topology_id;
>>>> +			topology_id = find_acpi_cpu_topology_package(cpu);
>>>> +			cpu_topology[cpu].package_id = topology_id;
>>>> +		}
>>>> +	}
>>>> +
>>>> +	return 0;
>>>> +}
>>>> +
>>>> +#else
>>>> +static inline int __init parse_acpi_topology(void)
>>>> +{
>>>> +	return -EINVAL;
>>>> +}
>>>> +#endif
>>>>  void __init init_cpu_topology(void)
>>>>  {
>>>> @@ -309,6 +351,8 @@ void __init init_cpu_topology(void)
>>>>  	 * Discard anything that was parsed if we hit an error so we
>>>>  	 * don't use partial information.
>>>>  	 */
>>>> -	if (of_have_populated_dt() && parse_dt_topology())
>>>> +	if ((!acpi_disabled) && parse_acpi_topology())
>>>> +		reset_cpu_topology();
>>>> +	else if (of_have_populated_dt() && parse_dt_topology())
>>>>  		reset_cpu_topology();
>>>>  }
>>>>
>>>
>>
> 
> .
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux