RE: [PATCH 02/37] iommu/sva: Bind process address spaces to devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> From: Jean-Philippe Brucker
> Sent: Tuesday, February 13, 2018 2:33 AM
> 
> Add bind() and unbind() operations to the IOMMU API. Device drivers can
> use them to share process page tables with their devices. bind_group()
> is provided for VFIO's convenience, as it needs to provide a coherent
> interface on containers. Other device drivers will most likely want to
> use bind_device(), which binds a single device in the group.

I saw your bind_group implementation tries to bind the address space
for all devices within a group, which IMO has some problem. Based on PCIe
spec, packet routing on the bus doesn't take PASID into consideration. 
since devices within same group cannot be isolated based on requestor-ID
i.e. traffic not guaranteed going to IOMMU, enabling SVA on multiple devices
could cause undesired p2p.
 
If my understanding of PCIe spec is correct, probably we should fail 
calling bind_group()/bind_device() when there are multiple devices within 
the given group. If only one device then bind_group is essentially a wrapper
to bind_device.

> 
> Regardless of the IOMMU group or domain a device is in, device drivers
> should call bind() for each device that will use the PASID.
> 
> This patch only adds skeletons for the device driver API, most of the
> implementation is still missing.
> 
> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@xxxxxxx>
> ---
>  drivers/iommu/iommu-sva.c | 105
> ++++++++++++++++++++++++++++++++++++++++++++++
>  drivers/iommu/iommu.c     |  63 ++++++++++++++++++++++++++++
>  include/linux/iommu.h     |  36 ++++++++++++++++
>  3 files changed, 204 insertions(+)
> 
> diff --git a/drivers/iommu/iommu-sva.c b/drivers/iommu/iommu-sva.c
> index cab5d723520f..593685d891bf 100644
> --- a/drivers/iommu/iommu-sva.c
> +++ b/drivers/iommu/iommu-sva.c
> @@ -9,6 +9,9 @@
> 
>  #include <linux/iommu.h>
> 
> +/* TODO: stub for the fault queue. Remove later. */
> +#define iommu_fault_queue_flush(...)
> +
>  /**
>   * iommu_sva_device_init() - Initialize Shared Virtual Addressing for a
> device
>   * @dev: the device
> @@ -78,6 +81,8 @@ int iommu_sva_device_shutdown(struct device *dev)
>  	if (!domain)
>  		return -ENODEV;
> 
> +	__iommu_sva_unbind_dev_all(dev);
> +
>  	if (domain->ops->sva_device_shutdown)
>  		domain->ops->sva_device_shutdown(dev);
> 
> @@ -88,3 +93,103 @@ int iommu_sva_device_shutdown(struct device
> *dev)
>  	return 0;
>  }
>  EXPORT_SYMBOL_GPL(iommu_sva_device_shutdown);
> +
> +/**
> + * iommu_sva_bind_device() - Bind a process address space to a device
> + * @dev: the device
> + * @mm: the mm to bind, caller must hold a reference to it
> + * @pasid: valid address where the PASID will be stored
> + * @flags: bond properties (IOMMU_SVA_FEAT_*)
> + * @drvdata: private data passed to the mm exit handler
> + *
> + * Create a bond between device and task, allowing the device to access
> the mm
> + * using the returned PASID. A subsequent bind() for the same device and
> mm will
> + * reuse the bond (and return the same PASID), but users will have to call
> + * unbind() twice.

what's the point of requiring unbind twice?

> + *
> + * Callers should have taken care of setting up SVA for this device with
> + * iommu_sva_device_init() beforehand. They may also be notified of the
> bond
> + * disappearing, for example when the last task that uses the mm dies, by
> + * registering a notifier with iommu_register_mm_exit_handler().
> + *
> + * If IOMMU_SVA_FEAT_PASID is requested, a PASID is allocated and
> returned.
> + * TODO: The alternative, binding the non-PASID context to an mm, isn't
> + * supported at the moment because existing IOMMU domain types
> initialize the
> + * non-PASID context for iommu_map()/unmap() or bypass. This requires
> a new
> + * domain type.
> + *
> + * If IOMMU_SVA_FEAT_IOPF is not requested, the caller must pin down
> all
> + * mappings shared with the device. mlock() isn't sufficient, as it doesn't
> + * prevent minor page faults (e.g. copy-on-write). TODO: !IOPF isn't
> allowed at
> + * the moment.
> + *
> + * On success, 0 is returned and @pasid contains a valid ID. Otherwise, an
> error
> + * is returned.
> + */
> +int iommu_sva_bind_device(struct device *dev, struct mm_struct *mm,
> int *pasid,
> +			  unsigned long flags, void *drvdata)
> +{
> +	struct iommu_domain *domain;
> +	struct iommu_param *dev_param = dev->iommu_param;
> +
> +	domain = iommu_get_domain_for_dev(dev);
> +	if (!domain)
> +		return -EINVAL;
> +
> +	if (!pasid)
> +		return -EINVAL;
> +
> +	if (!dev_param || (flags & ~dev_param->sva_features))
> +		return -EINVAL;
> +
> +	if (flags != (IOMMU_SVA_FEAT_PASID | IOMMU_SVA_FEAT_IOPF))
> +		return -EINVAL;
> +
> +	return -ENOSYS; /* TODO */
> +}
> +EXPORT_SYMBOL_GPL(iommu_sva_bind_device);
> +
> +/**
> + * iommu_sva_unbind_device() - Remove a bond created with
> iommu_sva_bind_device
> + * @dev: the device
> + * @pasid: the pasid returned by bind()
> + *
> + * Remove bond between device and address space identified by @pasid.
> Users
> + * should not call unbind() if the corresponding mm exited (as the PASID
> might
> + * have been reallocated to another process.)
> + *
> + * The device must not be issuing any more transaction for this PASID. All
> + * outstanding page requests for this PASID must have been flushed to the
> IOMMU.
> + *
> + * Returns 0 on success, or an error value
> + */
> +int iommu_sva_unbind_device(struct device *dev, int pasid)
> +{
> +	struct iommu_domain *domain;
> +
> +	domain = iommu_get_domain_for_dev(dev);
> +	if (WARN_ON(!domain))
> +		return -EINVAL;
> +
> +	/*
> +	 * Caller stopped the device from issuing PASIDs, now make sure
> they are
> +	 * out of the fault queue.
> +	 */
> +	iommu_fault_queue_flush(dev);
> +
> +	return -ENOSYS; /* TODO */
> +}
> +EXPORT_SYMBOL_GPL(iommu_sva_unbind_device);
> +
> +/**
> + * __iommu_sva_unbind_dev_all() - Detach all address spaces from this
> device
> + *
> + * When detaching @device from a domain, IOMMU drivers should use
> this helper.
> + */
> +void __iommu_sva_unbind_dev_all(struct device *dev)
> +{
> +	iommu_fault_queue_flush(dev);
> +
> +	/* TODO */
> +}
> +EXPORT_SYMBOL_GPL(__iommu_sva_unbind_dev_all);
> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
> index d4a4edaf2d8c..f977851c522b 100644
> --- a/drivers/iommu/iommu.c
> +++ b/drivers/iommu/iommu.c
> @@ -1535,6 +1535,69 @@ void iommu_detach_group(struct
> iommu_domain *domain, struct iommu_group *group)
>  }
>  EXPORT_SYMBOL_GPL(iommu_detach_group);
> 
> +/*
> + * iommu_sva_bind_group() - Share address space with all devices in the
> group.
> + * @group: the iommu group
> + * @mm: the mm to bind
> + * @pasid: valid address where the PASID will be stored
> + * @flags: bond properties (IOMMU_PROCESS_BIND_*)
> + * @drvdata: private data passed to the mm exit handler
> + *
> + * Create a bond between group and process, allowing devices in the
> group to
> + * access the process address space using @pasid.
> + *
> + * Refer to iommu_sva_bind_device() for more details.
> + *
> + * On success, 0 is returned and @pasid contains a valid ID. Otherwise, an
> error
> + * is returned.
> + */
> +int iommu_sva_bind_group(struct iommu_group *group, struct
> mm_struct *mm,
> +			 int *pasid, unsigned long flags, void *drvdata)
> +{
> +	struct group_device *device;
> +	int ret = -ENODEV;
> +
> +	if (!group->domain)
> +		return -EINVAL;
> +
> +	mutex_lock(&group->mutex);
> +	list_for_each_entry(device, &group->devices, list) {
> +		ret = iommu_sva_bind_device(device->dev, mm, pasid,
> flags,
> +					    drvdata);
> +		if (ret)
> +			break;
> +	}
> +
> +	if (ret) {
> +		list_for_each_entry_continue_reverse(device, &group-
> >devices, list)
> +			iommu_sva_unbind_device(device->dev, *pasid);
> +	}
> +	mutex_unlock(&group->mutex);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(iommu_sva_bind_group);
> +
> +/**
> + * iommu_sva_unbind_group() - Remove a bond created with
> iommu_sva_bind_group()
> + * @group: the group
> + * @pasid: the pasid returned by bind
> + *
> + * Refer to iommu_sva_unbind_device() for more details.
> + */
> +int iommu_sva_unbind_group(struct iommu_group *group, int pasid)
> +{
> +	struct group_device *device;
> +
> +	mutex_lock(&group->mutex);
> +	list_for_each_entry(device, &group->devices, list)
> +		iommu_sva_unbind_device(device->dev, pasid);
> +	mutex_unlock(&group->mutex);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(iommu_sva_unbind_group);
> +
>  phys_addr_t iommu_iova_to_phys(struct iommu_domain *domain,
> dma_addr_t iova)
>  {
>  	if (unlikely(domain->ops->iova_to_phys == NULL))
> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
> index e9e09eecdece..1fb10d64b9e5 100644
> --- a/include/linux/iommu.h
> +++ b/include/linux/iommu.h
> @@ -576,6 +576,10 @@ int iommu_fwspec_init(struct device *dev, struct
> fwnode_handle *iommu_fwnode,
>  void iommu_fwspec_free(struct device *dev);
>  int iommu_fwspec_add_ids(struct device *dev, u32 *ids, int num_ids);
>  const struct iommu_ops *iommu_ops_from_fwnode(struct
> fwnode_handle *fwnode);
> +extern int iommu_sva_bind_group(struct iommu_group *group,
> +				struct mm_struct *mm, int *pasid,
> +				unsigned long flags, void *drvdata);
> +extern int iommu_sva_unbind_group(struct iommu_group *group, int
> pasid);
> 
>  #else /* CONFIG_IOMMU_API */
> 
> @@ -890,12 +894,28 @@ const struct iommu_ops
> *iommu_ops_from_fwnode(struct fwnode_handle *fwnode)
>  	return NULL;
>  }
> 
> +static inline int iommu_sva_bind_group(struct iommu_group *group,
> +				       struct mm_struct *mm, int *pasid,
> +				       unsigned long flags, void *drvdata)
> +{
> +	return -ENODEV;
> +}
> +
> +static inline int iommu_sva_unbind_group(struct iommu_group *group,
> int pasid)
> +{
> +	return -ENODEV;
> +}
> +
>  #endif /* CONFIG_IOMMU_API */
> 
>  #ifdef CONFIG_IOMMU_SVA
>  extern int iommu_sva_device_init(struct device *dev, unsigned long
> features,
>  				 unsigned int max_pasid);
>  extern int iommu_sva_device_shutdown(struct device *dev);
> +extern int iommu_sva_bind_device(struct device *dev, struct mm_struct
> *mm,
> +				int *pasid, unsigned long flags, void
> *drvdata);
> +extern int iommu_sva_unbind_device(struct device *dev, int pasid);
> +extern void __iommu_sva_unbind_dev_all(struct device *dev);
>  #else /* CONFIG_IOMMU_SVA */
>  static inline int iommu_sva_device_init(struct device *dev,
>  					unsigned long features,
> @@ -908,6 +928,22 @@ static inline int
> iommu_sva_device_shutdown(struct device *dev)
>  {
>  	return -ENODEV;
>  }
> +
> +static inline int iommu_sva_bind_device(struct device *dev,
> +					struct mm_struct *mm, int *pasid,
> +					unsigned long flags, void *drvdata)
> +{
> +	return -ENODEV;
> +}
> +
> +static inline int iommu_sva_unbind_device(struct device *dev, int pasid)
> +{
> +	return -ENODEV;
> +}
> +
> +static inline void __iommu_sva_unbind_dev_all(struct device *dev)
> +{
> +}
>  #endif /* CONFIG_IOMMU_SVA */
> 
>  #endif /* __LINUX_IOMMU_H */
> --
> 2.15.1

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux