[PATCH] x86/acpi: Fix improper handling of SCI INT for platforms supporting only IOAPIC mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The platforms which support only IOAPIC mode and whose SCI INT is
greater than 16, passes SCI INT via FADT and not via MADT int src override
structure. In such cases current logic fails to handle it and throws error
"Invalid bus_irq %u for legacy override". This patch handles the above
 mentioned case. While at it, also modify function mp_override_legacy_irq()
to use the newly introduced function mp_register_ioapic_irq().

Signed-off-by: Vikas C Sajjan <vikas.cha.sajjan@xxxxxxx>
Signed-off-by: Sunil V L <sunil.vl@xxxxxxx>
Signed-off-by: Abdul Lateef Attar <abdul-lateef.attar@xxxxxxx>
---
 arch/x86/kernel/acpi/boot.c | 77 +++++++++++++++++++++++++++------------------
 1 file changed, 47 insertions(+), 30 deletions(-)

diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 079535e..8ab97a5 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -342,13 +342,12 @@ static int acpi_register_lapic(int id, u32 acpiid, u8 enabled)
 #ifdef CONFIG_X86_IO_APIC
 #define MP_ISA_BUS		0
 
+static int __init mp_register_ioapic_irq(u8 bus_irq, u8 polarity,
+						u8 trigger, u32 gsi);
+
 static void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger,
 					  u32 gsi)
 {
-	int ioapic;
-	int pin;
-	struct mpc_intsrc mp_irq;
-
 	/*
 	 * Check bus_irq boundary.
 	 */
@@ -357,32 +356,8 @@ static void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger,
 		return;
 	}
 
-	/*
-	 * Convert 'gsi' to 'ioapic.pin'.
-	 */
-	ioapic = mp_find_ioapic(gsi);
-	if (ioapic < 0)
+	if (mp_register_ioapic_irq(bus_irq, polarity, trigger, gsi) < 0)
 		return;
-	pin = mp_find_ioapic_pin(ioapic, gsi);
-
-	/*
-	 * TBD: This check is for faulty timer entries, where the override
-	 *      erroneously sets the trigger to level, resulting in a HUGE
-	 *      increase of timer interrupts!
-	 */
-	if ((bus_irq == 0) && (trigger == 3))
-		trigger = 1;
-
-	mp_irq.type = MP_INTSRC;
-	mp_irq.irqtype = mp_INT;
-	mp_irq.irqflag = (trigger << 2) | polarity;
-	mp_irq.srcbus = MP_ISA_BUS;
-	mp_irq.srcbusirq = bus_irq;	/* IRQ */
-	mp_irq.dstapic = mpc_ioapic_id(ioapic); /* APIC ID */
-	mp_irq.dstirq = pin;	/* INTIN# */
-
-	mp_save_irq(&mp_irq);
-
 	/*
 	 * Reset default identity mapping if gsi is also an legacy IRQ,
 	 * otherwise there will be more than one entry with the same GSI
@@ -429,6 +404,44 @@ static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger,
 	return 0;
 }
 
+static int __init mp_register_ioapic_irq(u8 bus_irq, u8 polarity,
+						u8 trigger, u32 gsi)
+{
+	int ioapic;
+	int pin;
+	struct mpc_intsrc mp_irq;
+
+	/*
+	 * Convert 'gsi' to 'ioapic.pin'.
+	 */
+	ioapic = mp_find_ioapic(gsi);
+	if (ioapic < 0) {
+		pr_warn("Failed to find ioapic for gsi : %u\n", gsi);
+		return ioapic;
+	}
+	pin = mp_find_ioapic_pin(ioapic, gsi);
+
+	/*
+	 * TBD: This check is for faulty timer entries, where the override
+	 *      erroneously sets the trigger to level, resulting in a HUGE
+	 *      increase of timer interrupts!
+	 */
+	if ((bus_irq == 0) && (trigger == 3))
+		trigger = 1;
+
+	mp_irq.type = MP_INTSRC;
+	mp_irq.irqtype = mp_INT;
+	mp_irq.irqflag = (trigger << 2) | polarity;
+	mp_irq.srcbus = MP_ISA_BUS;
+	mp_irq.srcbusirq = bus_irq;	/* IRQ */
+	mp_irq.dstapic = mpc_ioapic_id(ioapic); /* APIC ID */
+	mp_irq.dstirq = pin;	/* INTIN# */
+
+	mp_save_irq(&mp_irq);
+
+	return 0;
+}
+
 static int __init
 acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end)
 {
@@ -473,7 +486,11 @@ static void __init acpi_sci_ioapic_setup(u8 bus_irq, u16 polarity, u16 trigger,
 	if (acpi_sci_flags & ACPI_MADT_POLARITY_MASK)
 		polarity = acpi_sci_flags & ACPI_MADT_POLARITY_MASK;
 
-	mp_override_legacy_irq(bus_irq, polarity, trigger, gsi);
+	if (bus_irq < NR_IRQS_LEGACY)
+		mp_override_legacy_irq(bus_irq, polarity, trigger, gsi);
+	else
+		mp_register_ioapic_irq(bus_irq, polarity, trigger, gsi);
+
 	acpi_penalize_sci_irq(bus_irq, trigger, polarity);
 
 	/*
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux