> -----Original Message----- > From: Lorenzo Pieralisi [mailto:lorenzo.pieralisi@xxxxxxx] > Sent: Friday, November 03, 2017 11:35 AM > To: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@xxxxxxxxxx> > Cc: Robin Murphy <robin.murphy@xxxxxxx>; Will Deacon > <will.deacon@xxxxxxx>; Gabriele Paoloni <gabriele.paoloni@xxxxxxxxxx>; > marc.zyngier@xxxxxxx; linux-pci@xxxxxxxxxxxxxxx; joro@xxxxxxxxxx; John > Garry <john.garry@xxxxxxxxxx>; Guohanjun (Hanjun Guo) > <guohanjun@xxxxxxxxxx>; Linuxarm <linuxarm@xxxxxxxxxx>; linux- > acpi@xxxxxxxxxxxxxxx; iommu@xxxxxxxxxxxxxxxxxxxxxxxxxx; Wangzhou (B) > <wangzhou1@xxxxxxxxxxxxx>; sudeep.holla@xxxxxxx; bhelgaas@xxxxxxxxxx; > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; devel@xxxxxxxxxx > Subject: Re: [PATCH v9 2/4] iommu/dma: Add a helper function to reserve HW > MSI address regions for IOMMU drivers > > On Thu, Oct 26, 2017 at 10:11:58AM +0000, Shameerali Kolothum Thodi wrote: > [..] > > > > As we still don’t have a clear resolution on how to invoke the > > iort_iommu_msi_get_resv_regions(), I have gone back and attempted to > > move the smmu model check inside the iort code. This means the > > function will selectively apply HW MSI reservation based on the > > platform and also the function can be invoked from the > iommu_dma_get_resv_regions() directly. > > > > Could you please take a look at the below snippet and let me know your > feedback. > > Hope we can make some progress on this series. > > > > Thanks, > > Shameer > > > > -->8-- > > diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c > > index 876c0e1..a27233d 100644 > > --- a/drivers/acpi/arm64/iort.c > > +++ b/drivers/acpi/arm64/iort.c > > @@ -619,6 +619,39 @@ static int __maybe_unused __get_pci_rid(struct > pci_dev *pdev, u16 alias, > > return 0; > > } > > > > +static bool __maybe_unused iort_hw_msi_resv_enable(struct device *dev, > > + struct acpi_iort_node *node) > > +{ > > + struct acpi_iort_node *iommu = NULL; > > + int i; > > + > > + if (dev_is_pci(dev)) { > > + u32 rid; > > + > > + pci_for_each_dma_alias(to_pci_dev(dev), __get_pci_rid, &rid); > > + iommu = iort_node_map_id(node, rid, NULL, > IORT_IOMMU_TYPE); > > + } else { > > + for (i = 0; i < node->mapping_count; i++) { > > + iommu = iort_node_map_platform_id(node, NULL, > > + IORT_IOMMU_TYPE, > i); > > + if (iommu) > > + break; > > + } > > + } > > You do not need (and I do not want this code) to do the mapping again. > > You have the fwnode (ie dev->iommu_fwspec) corresponding to the IOMMU, > you can retrieve the SMMU IORT node by a simple look-up and carry out the > check below. Ok. Understood. I will rework this part then. > It would be simpler to set an option in the SMMUv3 driver but then you go back > to square one with DT/ACPI SMMUv3 driver awareness so, if, with the change > above this can make the generic approach work (ie Robin is happy with it) I am > fine with this IORT update as well. Thanks Lorenzo. I will rebase on top of rc1 and prepare v10 with these changes and sent it out. Shameer > > + > > + if (iommu && (iommu->type == ACPI_IORT_NODE_SMMU_V3)) { > > + struct acpi_iort_smmu_v3 *smmu; > > + > > + smmu = (struct acpi_iort_smmu_v3 *)iommu->node_data; > > + if (smmu->model == > ACPI_IORT_SMMU_V3_HISILICON_HI161X) { > > + dev_notice(dev, "Enabling HiSilicon erratum > 161010801\n"); > > + return true; > > + } > > + } > > + > > + return false; > > +} > > + > > static int arm_smmu_iort_xlate(struct device *dev, u32 streamid, > > struct fwnode_handle *fwnode, > > const struct iommu_ops *ops) @@ -682,6 +715,9 > @@ int > > iort_iommu_msi_get_resv_regions(struct device *dev, struct list_head > *head) > > if (!node) > > return -ENODEV; > > > > + if (!iort_hw_msi_resv_enable(dev, node)) > > + return 0; > > + > > /* > > * Current logic to reserve ITS regions relies on HW topologies > > * where a given PCI or named component maps its IDs to only one > > diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c > > index 9d1cebe..67c6e30 100644 > > --- a/drivers/iommu/dma-iommu.c > > +++ b/drivers/iommu/dma-iommu.c > > @@ -19,6 +19,7 @@ > > * along with this program. If not, see <http://www.gnu.org/licenses/>. > > */ > > > > +#include <linux/acpi_iort.h> > > #include <linux/device.h> > > #include <linux/dma-iommu.h> > > #include <linux/gfp.h> > > @@ -174,6 +175,10 @@ void iommu_dma_get_resv_regions(struct device > *dev, struct list_head *list) > > struct pci_host_bridge *bridge; > > struct resource_entry *window; > > > > + if (!is_of_node(dev->iommu_fwspec->iommu_fwnode) && > > + iort_iommu_msi_get_resv_regions(dev, list) < 0) > > + return; > > + > > if (!dev_is_pci(dev)) > > return; > > > > diff --git a/include/linux/acpi_iort.h b/include/linux/acpi_iort.h > > index 182a577..88f17c9 100644 > > --- a/include/linux/acpi_iort.h > > +++ b/include/linux/acpi_iort.h > > @@ -56,7 +56,7 @@ const struct iommu_ops *iort_iommu_configure(struct > > device *dev) { return NULL; } static inline int > > iort_iommu_msi_get_resv_regions(struct device *dev, struct list_head > > *head) -{ return -ENODEV; } > > +{ return 0; } > > #endif > > > > #endif /* __ACPI_IORT_H__ */ > > > > -->8-- > > > > > > ��.n��������+%������w��{.n�����{�����ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
