On 10/08/2017 18:27, Will Deacon wrote:
On Wed, Aug 09, 2017 at 11:07:15AM +0100, Shameer Kolothum wrote:
The HiSilicon erratum 161010801 describes the limitation of HiSilicon
platforms Hip06/Hip07 to support the SMMU mappings for MSI transactions.
On these platforms GICv3 ITS translator is presented with the deviceID
by extending the MSI payload data to 64 bits to include the deviceID.
Hence, the PCIe controller on this platforms has to differentiate the
MSI payload against other DMA payload and has to modify the MSI payload.
This basically makes it difficult for this platforms to have a SMMU
translation for MSI.
This patch implements a ACPI table based quirk to reserve the hw msi
regions in the smmu-v3 driver which means these address regions will
not be translated and will be excluded from iova allocations.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@xxxxxxxxxx>
---
drivers/iommu/arm-smmu-v3.c | 27 ++++++++++++++++++++++-----
1 file changed, 22 insertions(+), 5 deletions(-)
Please can you also add a devicetree binding with corresponding
documentation to enable this workaround on non-ACPI based systems too? It
should be straightforward if you update the arm_smmu_options table.
Hi Will, Lorenzo, Robin,
I have created the patch to add DT support for this erratum. However,
currently I have only added support for pci-based devices. I'm a bit
stumped on how to add platform device support, or if we should also add
support at all. And I would rather ask before sending the patches.
The specific issue is that I know of no platform device with an ITS
msi-parent which we would want reserve, i.e. do not translate msi. And,
if there were, how to do it.
The only platform devices I know off with msi ITS parents are SMMUv3 and
mbigen. For mbigen, the msi are not translated. Actually, as I see under
IORT solution, for mbigen we don't reserve the hw msi region as the
SMMUv3 does not have an ID mapping. And we have no equivalent ID mapping
property for DT SMMUv3, so cannot create an equivalent check.
So here is how the DT iommu get reserved region function with only pci
device support looks:
/**
* of_iommu_its_get_resv_regions - Reserved region driver helper
* @dev: Device from iommu_get_resv_regions()
* @list: Reserved region list from iommu_get_resv_regions()
*
* Returns: Number of reserved regions on success(0 if no associated ITS),
* appropriate error value otherwise.
*/
int of_iommu_its_get_resv_regions(struct device *dev, struct list_head
*head)
{
struct device_node *of_node = NULL;
struct device *parent_dev;
const __be32 *msi_map;
int num_mappings, i, err, len, resv = 0;
/* walk up to find the parent with a msi-map property */
for (parent_dev = dev; parent_dev; parent_dev = parent_dev->parent) {
if (!parent_dev->of_node)
continue;
/*
* Current logic to reserve ITS regions for only PCI root
* complex.
*/
msi_map = of_get_property(parent_dev->of_node, "msi-map", &len);
if (msi_map) {
of_node = parent_dev->of_node;
break;
}
}
if (!of_node)
return 0;
num_mappings = of_count_phandle_with_args(of_node, "msi-map", NULL)
/ 4;
for (i = 0; i < num_mappings; i++) {
int prot = IOMMU_WRITE | IOMMU_NOEXEC | IOMMU_MMIO;
struct iommu_resv_region *region;
struct device_node *msi_node;
struct resource resource;
u32 phandle;
phandle = be32_to_cpup(msi_map + 1);
msi_node = of_find_node_by_phandle(phandle);
if (!msi_node)
return -ENODEV;
/*
* There may be different types of msi-controller, so check
* for ITS.
*/
if (!of_device_is_compatible(msi_node, "arm,gic-v3-its")) {
of_node_put(msi_node);
continue;
}
err = of_address_to_resource(msi_node, 0, &resource);
of_node_put(msi_node);
if (err)
return err;
region = iommu_alloc_resv_region(resource.start, SZ_128K, prot,
IOMMU_RESV_MSI);
if (region) {
list_add_tail(®ion->list, head);
resv++;
}
}
return (resv == num_mappings) ? resv : -ENODEV;
}
Any feedback is appreciated.
Thanks,
John
Thanks,
Will
.
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
