On Thu, 24 Aug 2017 11:40:43 +0200, Takashi Iwai wrote: > > On Thu, 24 Aug 2017 11:14:53 +0200, > Mika Westerberg wrote: > > > > On Thu, Aug 24, 2017 at 10:11:41AM +0200, Takashi Iwai wrote: > > > This patch adds the opregion driver for Dollar Cove TI PMIC on Intel > > > Cherry Trail devices. The patch is based on the original work by > > > Intel, found at: > > > https://github.com/01org/ProductionKernelQuilts > > > with many cleanups and rewrites. > > > > > > The driver is currently provided only as built-in to follow other > > > PMIC opregion drivers convention. > > > > > > The re-enumeration of devices at probe is required for fixing the > > > issues on HP x2 210 G2. See bug#195689. > > > > > > Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=193891 > > > Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195689 > > > Signed-off-by: Takashi Iwai <tiwai@xxxxxxx> > > > --- > > > v1->v2: > > > * get_raw_temp cleanup in opregion driver, mention about register > > > endianess > > > > > > drivers/acpi/Kconfig | 6 ++ > > > drivers/acpi/Makefile | 1 + > > > drivers/acpi/pmic/intel_pmic_dc_ti.c | 139 +++++++++++++++++++++++++++++++++++ > > > 3 files changed, 146 insertions(+) > > > create mode 100644 drivers/acpi/pmic/intel_pmic_dc_ti.c > > > > > > diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig > > > index 1ce52f84dc23..9da8dcefde7b 100644 > > > --- a/drivers/acpi/Kconfig > > > +++ b/drivers/acpi/Kconfig > > > @@ -521,6 +521,12 @@ config CHT_WC_PMIC_OPREGION > > > help > > > This config adds ACPI operation region support for CHT Whiskey Cove PMIC. > > > > > > +config DC_TI_PMIC_OPREGION > > > + bool "ACPI operation region support for Dollar Cove TI PMIC" > > > + depends on INTEL_SOC_PMIC_DC_TI > > > + help > > > + This config adds ACPI operation region support for Dollar Cove TI PMIC. > > > + > > > endif > > > > > > config ACPI_CONFIGFS > > > diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile > > > index b1aacfc62b1f..0a9008b971af 100644 > > > --- a/drivers/acpi/Makefile > > > +++ b/drivers/acpi/Makefile > > > @@ -103,6 +103,7 @@ obj-$(CONFIG_CRC_PMIC_OPREGION) += pmic/intel_pmic_crc.o > > > obj-$(CONFIG_XPOWER_PMIC_OPREGION) += pmic/intel_pmic_xpower.o > > > obj-$(CONFIG_BXT_WC_PMIC_OPREGION) += pmic/intel_pmic_bxtwc.o > > > obj-$(CONFIG_CHT_WC_PMIC_OPREGION) += pmic/intel_pmic_chtwc.o > > > +obj-$(CONFIG_DC_TI_PMIC_OPREGION) += pmic/intel_pmic_dc_ti.o > > > > > > obj-$(CONFIG_ACPI_CONFIGFS) += acpi_configfs.o > > > > > > diff --git a/drivers/acpi/pmic/intel_pmic_dc_ti.c b/drivers/acpi/pmic/intel_pmic_dc_ti.c > > > new file mode 100644 > > > index 000000000000..a2be1270eeeb > > > --- /dev/null > > > +++ b/drivers/acpi/pmic/intel_pmic_dc_ti.c > > > @@ -0,0 +1,139 @@ > > > +/* > > > + * Dollar Cove TI PMIC operation region driver > > > + * Copyright (C) 2014 Intel Corporation. All rights reserved. > > > + * > > > + * Rewritten and cleaned up > > > + * Copyright (C) 2017 Takashi Iwai <tiwai@xxxxxxx> > > > + */ > > > + > > > +#include <linux/acpi.h> > > > +#include <linux/init.h> > > > +#include <linux/mfd/intel_soc_pmic.h> > > > +#include <linux/platform_device.h> > > > +#include "intel_pmic.h" > > > + > > > +/* registers stored in 16bit BE (high:low, total 10bit) */ > > > +#define DC_TI_VBAT 0x54 > > > +#define DC_TI_DIETEMP 0x56 > > > +#define DC_TI_BPTHERM 0x58 > > > +#define DC_TI_GPADC 0x5a > > > + > > > +static struct pmic_table dc_ti_power_table[] = { > > > > const? > > > > > + { .address = 0x00, .reg = 0x41 }, > > > + { .address = 0x04, .reg = 0x42 }, > > > + { .address = 0x08, .reg = 0x43 }, > > > + { .address = 0x0c, .reg = 0x45 }, > > > + { .address = 0x10, .reg = 0x46 }, > > > + { .address = 0x14, .reg = 0x47 }, > > > + { .address = 0x18, .reg = 0x48 }, > > > + { .address = 0x1c, .reg = 0x49 }, > > > + { .address = 0x20, .reg = 0x4a }, > > > + { .address = 0x24, .reg = 0x4b }, > > > + { .address = 0x28, .reg = 0x4c }, > > > + { .address = 0x2c, .reg = 0x4d }, > > > + { .address = 0x30, .reg = 0x4e }, > > > +}; > > > + > > > +static struct pmic_table dc_ti_thermal_table[] = { > > > > const? > > Oh yeah, I was too lazy. Will cover up in the next round. It seems that power_table and thermal_table are non-const in the definition. Also opregion_data is also passed as non-const to intel_pmic_install_opregion_handler(). So only id_table[] can be const, so far. (It's a good hint for further cleanup patches ;) thanks, Takashi -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
