"Luck, Tony" <tony.luck@xxxxxxxxx> writes:
> From: Tony Luck <tony.luck@xxxxxxxxx>
>
> The ACPI sysfs interface provides a way to read each ACPI table from
> userspace via entries in /sys/firmware/acpi/tables/
>
> The BERT table simply provides the size and address of the error
> record in BIOS reserved memory and users may want access to this
> record.
>
> In an earlier age we might have used /dev/mem to retrieve this error
> record, but many systems disable /dev/mem for security reasons.
>
> Extend this driver to provide read-only access to the data via a
> file in a new directory /sys/firmware/acpi/tables/data/BERT
>
> Cc: Len Brown <lenb@xxxxxxxxxx>
> Cc: Boris Petkov <bp@xxxxxxx>
> Cc: Tyler Baicar <tbaicar@xxxxxxxxxxxxxx>
> Cc: Punit Agrawal <punit.agrawal@xxxxxxx>
> Cc: linux-acpi@xxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> Signed-off-by: Tony Luck <tony.luck@xxxxxxxxx>
>
> v4: (suggested by Punit Agrawal) extend the /sys/firmware/acpi
> code to provide this functionality. File/directory names changed
> to Rafael's suggestions
> ---
> drivers/acpi/sysfs.c | 79 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 79 insertions(+)
>
> diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c
> index e414fabf7315..7c4eed0594d0 100644
> --- a/drivers/acpi/sysfs.c
> +++ b/drivers/acpi/sysfs.c
> @@ -306,11 +306,13 @@ module_param_call(acpica_version, NULL, param_get_acpica_version, NULL, 0444);
> /*
> * ACPI table sysfs I/F:
> * /sys/firmware/acpi/tables/
> + * /sys/firmware/acpi/tables-data/
Typo: Should be "/sys/firmware/acpi/tables/data/"
> * /sys/firmware/acpi/tables/dynamic/
> */
>
> static LIST_HEAD(acpi_table_attr_list);
> static struct kobject *tables_kobj;
> +static struct kobject *tables_data_kobj;
> static struct kobject *dynamic_tables_kobj;
> static struct kobject *hotplug_kobj;
>
> @@ -325,6 +327,11 @@ struct acpi_table_attr {
> struct list_head node;
> };
>
> +struct acpi_data_attr {
> + struct bin_attribute attr;
> + u64 addr;
> +};
If all we are going to need is an address, it could also be stored in
the "private" member of attr (similar to how it's done in
pci-sysfs.c). But it goes against usage in the rest of the file so I am
fine either ways.
> +
> static ssize_t acpi_table_show(struct file *filp, struct kobject *kobj,
> struct bin_attribute *bin_attr, char *buf,
> loff_t offset, size_t count)
> @@ -420,6 +427,70 @@ acpi_status acpi_sysfs_table_handler(u32 event, void *table, void *context)
> return AE_OK;
> }
>
> +static ssize_t acpi_data_show(struct file *filp, struct kobject *kobj,
> + struct bin_attribute *bin_attr, char *buf,
> + loff_t offset, size_t count)
> +{
> + struct acpi_data_attr *data_attr;
> + void __iomem *base;
> + ssize_t rc;
> +
> + data_attr = container_of(bin_attr, struct acpi_data_attr, attr);
> +
> + base = acpi_os_map_memory(data_attr->addr, data_attr->attr.size);
> + if (!base)
> + return -ENOMEM;
> + rc = memory_read_from_buffer(buf, count, &offset, base,
> + data_attr->attr.size);
> + acpi_os_unmap_memory(base, data_attr->attr.size);
> +
> + return rc;
> +}
> +
> +static int acpi_bert_data_init(void *th, struct acpi_data_attr *data_attr)
> +{
> + struct acpi_table_bert *bert = th;
> +
> + if (bert->header.length < sizeof(struct acpi_table_bert) ||
> + bert->region_length < sizeof(struct acpi_hest_generic_status)) {
> + kfree(data_attr);
> + return -EINVAL;
> + }
> + data_attr->addr = bert->address;
> + data_attr->attr.size = bert->region_length;
> + data_attr->attr.attr.name = "BERT";
> +
> + return sysfs_create_bin_file(tables_data_kobj, &data_attr->attr);
> +}
> +
> +static struct acpi_data_obj {
> + char *name;
> + int (*fn)(void *, struct acpi_data_attr *);
> +} acpi_data_objs[] = {
> + { ACPI_SIG_BERT, acpi_bert_data_init },
> +};
> +
> +#define NUM_ACPI_DATA_OBJS ARRAY_SIZE(acpi_data_objs)
> +
> +static int acpi_table_data_init(struct acpi_table_header *th)
> +{
> + struct acpi_data_attr *data_attr;
> + int i;
> +
> + for (i = 0; i < NUM_ACPI_DATA_OBJS; i++) {
> + if (ACPI_COMPARE_NAME(th->signature, acpi_data_objs[i].name)) {
> + data_attr = kzalloc(sizeof(*data_attr), GFP_KERNEL);
> + if (!data_attr)
> + return -ENOMEM;
> + sysfs_attr_init(&data_attr->attr.attr);
> + data_attr->attr.read = acpi_data_show;
> + data_attr->attr.attr.mode = 0400;
> + return acpi_data_objs[i].fn(th, data_attr);
> + }
> + }
> + return 0;
> +}
> +
> static int acpi_tables_sysfs_init(void)
> {
> struct acpi_table_attr *table_attr;
> @@ -432,6 +503,10 @@ static int acpi_tables_sysfs_init(void)
> if (!tables_kobj)
> goto err;
>
> + tables_data_kobj = kobject_create_and_add("data", tables_kobj);
> + if (!tables_data_kobj)
> + goto err_tables_data;
> +
> dynamic_tables_kobj = kobject_create_and_add("dynamic", tables_kobj);
> if (!dynamic_tables_kobj)
> goto err_dynamic_tables;
> @@ -456,13 +531,17 @@ static int acpi_tables_sysfs_init(void)
> return ret;
> }
> list_add_tail(&table_attr->node, &acpi_table_attr_list);
> + acpi_table_data_init(table_header);
> }
>
> kobject_uevent(tables_kobj, KOBJ_ADD);
> + kobject_uevent(tables_data_kobj, KOBJ_ADD);
> kobject_uevent(dynamic_tables_kobj, KOBJ_ADD);
>
> return 0;
> err_dynamic_tables:
> + kobject_put(tables_data_kobj);
> +err_tables_data:
> kobject_put(tables_kobj);
> err:
> return -ENOMEM;
I like how this fits into existing infrastructure.
With the typo addressed -
Acked-by: Punit Agrawal <punit.agrawal@xxxxxxx>
Thanks,
Punit
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
